Lockdown Protocol

Resolution Scaling

The measured FPS data for Lockdown Protocol with the AMD Ryzen 5 2600 and AMD Radeon RX 7600 shows a clear and consistent scaling pattern as resolution increases. At 1080p with Low settings, the combo delivers 161.5 FPS average. Moving to 1440p at the same settings drops this to 120.4 FPS, a reduction of roughly 25%. At 4K, the Low preset yields 76.4 FPS, which represents another significant step down from the 1440p figure. This scaling behavior indicates that the GPU is becoming the primary limiting factor as pixel count rises, since the frame rate drops are proportionally larger than what would be expected from a purely CPU-bound scenario.

The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the difference between Low (161.5 FPS) and Ultra (74.9 FPS) is 86.6 FPS. At 1440p, that gap narrows to 65.0 FPS (120.4 versus 55.4). At 4K, the spread compresses further to 42.5 FPS (76.4 versus 33.9). This compression at higher resolutions is a classic sign that the GPU is saturated; when the render load is high, the relative cost of each additional quality setting diminishes because the GPU is already working near its limit.

Looking at the medium settings tier, the scaling from 1080p (114.9 FPS) to 1440p (84.8 FPS) represents a 26% drop, while the jump from 1440p to 4K (56.1 FPS) is a 34% reduction. The High preset shows similar proportions: 101.8 FPS at 1080p, 71.8 FPS at 1440p, and 47.1 FPS at 4K. These consistent percentage reductions across settings tiers confirm that resolution scaling is uniform regardless of quality preset, reinforcing the conclusion that the graphics pipeline is the bottleneck in most scenarios.

The 4K Ultra result of 33.9 FPS is the only measured point that falls below 40 FPS, indicating that this combination is not suited for maximum quality at 4K. The 1440p Ultra figure of 55.4 FPS is playable but not smooth by modern standards, while 1080p Ultra at 74.9 FPS remains comfortably within acceptable ranges.

CPU Role

The AMD Ryzen 5 2600 brings six cores and twelve threads to this pairing, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. This processor belongs to the Zen architecture family, fabricated on a 12 nm process at GlobalFoundries. Its benchmark results provide context for its capabilities: a Cinebench R23 multi-core score of 11,186 and a single-core score of 1,579. The PassMark multi-thread score of 13,160 and single-thread score of 2,239 further characterize its compute performance.

In the context of Lockdown Protocol, an FPS title, the CPU's single-thread performance is particularly relevant. The processor's 77th percentile ranking among all CPUs indicates it sits in the upper-middle tier for overall performance. Its nearest rivals include the Intel Core i5-1345U (deltaPct -0.4), AMD Ryzen 5 7530U (deltaPct 0.6), Intel Core i5-11600KF (deltaPct -0.6), and Intel Core i7-10700F (deltaPct 0.7). These deltas are all within a single percentage point, showing that the Ryzen 5 2600 performs essentially on par with these competing chips in aggregate benchmarks.

The measured FPS data suggests that the CPU is not the primary constraint in most tested configurations. At 1080p Low, the frame rate reaches 161.5 FPS, which is high enough to indicate that the CPU can feed the GPU adequately at lower resolutions. However, the fact that 1080p Ultra drops to 74.9 FPS while 1080p Low hits 161.5 FPS implies that the rendering load, not the CPU's instruction throughput, is what limits performance at higher quality settings. The CPU's twelve threads provide enough parallelism for the game's background tasks, but the single-core boost of 3.90 GHz is modest by current standards, which may explain why frame rates plateau rather than scale higher at 1080p Low.

GPU Role

The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture, using the Navi 33 chip fabricated on a 6 nm process at TSMC. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 288.0 GB/s of bandwidth. The GPU's base clock runs at 1720 MHz, with a boost clock of 2655 MHz and a game clock of 2250 MHz. Memory operates at 2250 MHz, translating to 18 Gbps effective. With 2,048 shading units, 128 texture mapping units, and 64 ROPs, the card delivers 21.75 TFLOPS of FP32 compute and a pixel rate of 169.9 GPixel/s.

The GPU's benchmark scores position it at the 63rd percentile among all GPUs. Its PassMark G3D score of 16,634 and 3DMark Steel Nomad DX12 score of 2,310 provide reference points. Notably, its nearest rival list includes the AMD Radeon RX 7600 XT with a deltaPct of 0.6, meaning the RX 7600 is actually slightly ahead of its XT sibling in average benchmark score. The other rivals include the AMD Radeon RX 460 (deltaPct 0.8), NVIDIA GeForce RTX 3070 Mobile (deltaPct -1.3), and Intel Arc B570 (deltaPct -1.5). The RX 7600 outperforms the RTX 3070 Mobile and Arc B570 by over a percentage point in aggregate scores.

In Lockdown Protocol, the GPU's role becomes evident in the resolution scaling data. The 8 GB VRAM capacity is sufficient for the tested settings, as there are no anomalous frame rate collapses that would indicate memory capacity issues. The 288.0 GB/s bandwidth appears adequate for the game's demands at 1080p and 1440p, but the 4K results show the GPU's computational limits. The transition from 1440p High (71.8 FPS) to 4K High (47.1 FPS) represents a 34% reduction, which aligns closely with the raw pixel count increase from 3.7 million to 8.3 million pixels, confirming that the GPU's shading and rasterization throughput is the limiting factor at 4K.

Measured FPS Breakdown

At 1920x1080, the combo produces its highest frame rates across all settings. Low settings yield 161.5 FPS average, Medium drops to 114.9 FPS, High to 101.8 FPS, and Ultra to 74.9 FPS. The step from Low to Medium is the largest single reduction at 46.6 FPS, while the gap between Medium and High is 13.1 FPS, and High to Ultra is 26.9 FPS. This pattern suggests that the Low preset removes substantial rendering work, while Medium and High represent incremental quality improvements with moderate cost.

At 2560x1440, the measured averages are 120.4 FPS for Low, 84.8 FPS for Medium, 71.8 FPS for High, and 55.4 FPS for Ultra. The relative ordering remains consistent with 1080p, but the absolute values are lower across the board. The Low-to-Medium gap here is 35.6 FPS, Medium-to-High is 13.0 FPS, and High-to-Ultra is 16.4 FPS. The Ultra preset at 1440p falls below 60 FPS, which is notable for a competitive FPS title.

At 3840x2160, the data shows 76.4 FPS for Low, 56.1 FPS for Medium, 47.1 FPS for High, and 33.9 FPS for Ultra. The Low preset remains above 60 FPS even at 4K, which is surprising given the GPU's mid-range positioning. However, every other preset at 4K falls below 60 FPS, and Ultra drops below 35 FPS. The scaling from 1080p Low to 4K Low (161.5 down to 76.4) represents a 53% reduction, while the same resolution change at Ultra (74.9 down to 33.9) is a 55% reduction, showing remarkably consistent scaling across settings tiers.

How This Combo Ranks

The combination of the AMD Ryzen 5 2600 and AMD Radeon RX 7600 ranks 1,119th out of 1,637 tested combinations in Lockdown Protocol. This places it in the 68th percentile of all tested combos, meaning approximately 32% of configurations perform better. Given that the CPU sits at the 77th percentile among all CPUs and the GPU at the 63rd percentile among all GPUs, the combo's overall ranking is slightly below what the CPU percentile alone would suggest, but higher than the GPU percentile alone would predict.

This ranking indicates that the pairing is reasonably balanced, with neither component dragging the other down disproportionately. The CPU's aggregate benchmark score of 19,616 and the GPU's average benchmark score of 20,258 are both in the mid-range, and their combined performance in this game aligns with expectations. The 1,119th rank out of 1,637 suggests there is meaningful headroom for improvement with faster components, but the combo is not at the bottom of the distribution by any means.

The nearest rival data for the CPU shows it performing nearly identically to chips like the Intel Core i5-11600KF and Intel Core i7-10700F, while the GPU outperforms its closest competitors by small margins. In a game like Lockdown Protocol, where frame rates are generally high, the combo's ranking reflects a configuration that can handle competitive play at 1080p and 1440p with appropriate settings, but struggles at 4K Ultra.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and desired frame rate. At 1920x1080, the High preset at 101.8 FPS offers a strong balance between visual quality and smoothness, keeping the frame rate well above 100 FPS. The Ultra preset at 74.9 FPS is still playable and may be preferred for those who prioritize image quality over raw frame rate. The Low preset at 161.5 FPS is excessive for most displays, which typically cap at 144 Hz or 165 Hz, making the Medium preset at 114.9 FPS a reasonable middle ground for high-refresh monitors.

At 2560x1440, the High preset at 71.8 FPS is the highest quality option that remains above 60 FPS, making it the recommended choice for a smooth experience at this resolution. The Medium preset at 84.8 FPS provides additional headroom for variable refresh rate displays, while the Low preset at 120.4 FPS is suitable for competitive play where frame rate is paramount. The Ultra preset at 55.4 FPS falls below 60 FPS and is not recommended for serious gameplay, as the frame pacing will be less consistent.

At 3840x2160, only the Low preset at 76.4 FPS achieves a playable frame rate above 60 FPS. The Medium preset at 56.1 FPS and High at 47.1 FPS are borderline, while Ultra at 33.9 FPS is not viable for an FPS title. For 4K users, the Low preset is the only sensible choice, though it sacrifices significant visual fidelity. In summary, the best experience per the measured data is 1080p High for general play, 1440p High for a balance of quality and performance, and 4K Low only if resolution is non-negotiable.