Inside

# Inside: Intel Core i7-14700KF + NVIDIA GeForce RTX 3070 Ti

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 3070 Ti lands at rank 1084 out of 3716 tested combos in Inside, placing it comfortably in the upper third of all configurations. This is a strong result for a puzzle platformer that is not particularly demanding by modern standards, and the data shows this pairing has ample headroom for high-refresh-rate displays across all tested resolutions. The combination of a 20-core, 28-thread processor with an 8 GB GDDR6X graphics card produces consistently high frame rates, though the GPU becomes the limiting factor at 4K Ultra settings.

How This Combo Ranks

The combo's position at 1084 of 3716 tested combinations means roughly 71% of all tested systems perform worse in Inside. That places this pairing in the upper tier, though not at the very top—the game's modest requirements mean even mid-range hardware can achieve playable frame rates, so the ranking reflects the substantial performance headroom rather than a necessity for smooth gameplay. The CPU alone sits in the 94th percentile among all processors, while the GPU ranks in the 75th percentile among all graphics cards, so the bottleneck profile is balanced with a slight lean toward CPU capability.

Comparing the CPU to its nearest rivals, the i7-14700KF's average benchmark score of 70163 is essentially tied with the AMD Ryzen 7 9700F at 69996 (0.2% higher) and the AMD Ryzen 9 7940HX at 69875 (0.4% higher). It edges out the AMD Ryzen 9 7950X by 0.9% but trails the Intel Core Ultra 7 265K by 1%. These are negligible differences in real-world terms, meaning any of these processors would deliver nearly identical performance in Inside. The GPU shows a similar pattern: the RTX 3070 Ti's average score of 29945 is within 0.5% of the NVIDIA GeForce RTX 5070 Mobile (29928) and the NVIDIA GeForce RTX 2080 Ti (29783), while the AMD Radeon RX 6800 leads by 0.5% and the AMD Radeon RX 6700 leads by 1.6%. Again, these deltas are small enough that gameplay differences would be imperceptible.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with the GA104 chip, manufactured on Samsung's 8 nm process with 17,400 million transistors. Its 8 GB of GDDR6X memory runs at 19 Gbps effective across a 256-bit bus, yielding 608.3 GB/s of bandwidth. The card's base clock is 1575 MHz with a boost clock of 1770 MHz, and it features 6144 shading units, 192 texture mapping units, and 96 raster output pipelines. With 48 ray tracing cores and 192 tensor cores, it supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 APIs.

In Inside, the GPU's performance scales predictably with settings and resolution. At 4K, the RTX 3070 Ti delivers 90 FPS on High, 143 FPS on Medium, and 179 FPS on Low, but drops to 85 FPS on Ultra. This 5 FPS gap between High and Ultra at 4K suggests the Ultra preset's additional effects (likely shadow quality and post-processing) push the card near its limits. The 8 GB VRAM capacity is sufficient for this game even at 4K Ultra, as evidenced by the playable 85 FPS average, though the lack of min FPS data for many configurations makes it difficult to assess frame pacing consistency.

The GPU's nearest rivals show it's competitively positioned: the RTX 3070 Ti outperforms the RTX 2080 Ti by 0.5% and trails the RX 6800 by 0.5% and RX 6700 by 1.6%. In a game like Inside that doesn't heavily tax modern GPUs, these differences translate to a few frames per second at most, making the RTX 3070 Ti effectively interchangeable with its closest competitors for this title.

FAQ

*Q: Is the Intel Core i7-14700KF overkill for Inside?*

A: The CPU's 94th percentile ranking among all processors means it's far more powerful than this puzzle platformer requires. Benchmark results show the i7-14700KF achieves a Cinebench R23 multicore score of 44167 and a single-core score of 6235, indicating massive headroom for a game that primarily relies on GPU rendering. The data shows the combo ranking at 1084 of 3716, which is strong but not top-tier, suggesting other system components or the GPU limit overall performance.

*Q: Can this combo run Inside at 4K 60 FPS?*

A: Yes, at any settings preset. Measured FPS shows 85 FPS at 4K Ultra, 90 FPS at 4K High, 143 FPS at 4K Medium, and 179 FPS at 4K Low. Even the lowest result (85 FPS at Ultra) exceeds 60 FPS by a wide margin, so the RTX 3070 Ti has no trouble maintaining smooth gameplay at 4K regardless of quality settings.

Q: How does the RTX 3070 Ti compare to the RTX 2080 Ti in this context?

A: The RTX 3070 Ti's average benchmark score of 29945 is 0.5% higher than the RTX 2080 Ti's 29783. In Inside, this translates to virtually identical frame rates—both cards would deliver within a few FPS of each other at any resolution and settings preset. The RTX 3070 Ti also matches the RTX 5070 Mobile's score (29928) within 0.1%, showing it remains competitive against newer mobile parts.

Q: What resolution gives the best experience with this hardware?

A: At 1440p, the combo delivers 136 FPS on Ultra and 143 FPS on High, which is ideal for 144 Hz monitors. At 4K, Ultra runs at 85 FPS and High at 90 FPS, which suits 60 Hz displays but leaves refresh rate headroom unused. For maximum smoothness on high-refresh displays, 1440p High or Ultra provides the best balance of visual quality and frame rate.

*Q: Does the CPU's multi-core performance matter for Inside?*

A: The i7-14700KF's multi-core capabilities are far beyond what this game needs—its Passmark multithread score is 52425 and Geekbench multicore is 21462. Inside is a puzzle platformer with simple physics and AI, so single-core performance (Cinebench R23 single-core score of 6235) is more relevant, but even this is excessive. The CPU will not bottleneck the RTX 3070 Ti in any scenario.

*Q: Is 8 GB of VRAM enough for Inside at maximum settings?*

A: The measured data shows 85 FPS at 4K Ultra with the RTX 3070 Ti's 8 GB GDDR6X memory, so yes, 8 GB is sufficient for this game. Inside uses a stylized art style with limited texture complexity, and the 608.3 GB/s memory bandwidth provides ample throughput for 4K rendering.

Measured FPS Breakdown

At 1920x1080, the combo shows extraordinary performance across all settings. Low settings produce 397 FPS, Medium delivers 317 FPS (with min FPS of 270 and max FPS of 365), High achieves 198 FPS, and Ultra runs at 189 FPS. The gap between Medium and High is substantial (119 FPS), while the difference between High and Ultra is only 9 FPS, suggesting High is the sweet spot for quality-per-frame at 1080p. Even at Ultra, the 189 FPS average far exceeds any monitor's refresh rate, making this resolution essentially GPU-bound only at the most extreme settings.

At 2560x1440, performance remains excellent but shows the expected scaling. Low settings hit 285 FPS, Medium achieves 228 FPS (min 194, max 263), High delivers 143 FPS, and Ultra runs at 136 FPS. The Medium-to-High drop of 85 FPS is notable, while High-to-Ultra costs only 7 FPS. This resolution is where the GPU starts to show meaningful load, but the RTX 3070 Ti still maintains over 135 FPS even at Ultra, comfortably supporting 144 Hz displays with room to spare.

At 3840x2160, the GPU begins to demonstrate its limits. Low settings produce 179 FPS, Medium delivers 143 FPS (min 122, max 165), High achieves 90 FPS, and Ultra drops to 85 FPS. The scaling from Medium to High is steep (53 FPS), indicating that High settings at 4K push the card significantly harder, while High-to-Ultra costs only 5 FPS. The min FPS of 122 at Medium shows consistency, but the lack of min FPS data for other presets leaves frame pacing questions unanswered. Regardless, all 4K results exceed 85 FPS, which is playable on any display.

CPU Role

The Intel Core i7-14700KF is a 20-core, 28-thread processor based on Raptor Lake architecture, manufactured on Intel's 10 nm process with a 257 mm² die size. Its base clock is 3.40 GHz with a boost clock of 5.60 GHz, and it supports both DDR4 and DDR5 memory across a dual-channel bus. The cache hierarchy includes 80 KB of L1 per core, 2 MB of L2 per core, and 33 MB of shared L3 cache. With a TDP of 125 W and PCIe Gen 5 support (16 CPU lanes), this is a high-end desktop part designed for demanding workloads.

For Inside, the CPU's role is minimal because the game's puzzle platformer nature places most of the computational burden on the GPU. The i7-14700KF's single-core performance—Cinebench R23 single-core score of 6235 and Geekbench single-core of 2578—is more than sufficient for the game's logic, physics, and audio processing. The multi-core capabilities (Cinebench R23 multicore of 44167, Passmark multithread of 52425) are essentially unused, as Inside does not scale across many threads. This means the processor will never bottleneck the RTX 3070 Ti in this title, even at 1080p with frame rates above 300 FPS.

The CPU's benchmark profile shows it competes closely with several AMD and Intel rivals. Its average score of 70163 is 0.2% above the Ryzen 7 9700F and 0.4% above the Ryzen 9 7940HX, while it leads the Ryzen 9 7950X by 0.9% and trails the Core Ultra 7 265K by 1%. These margins are negligible for gaming, and the i7-14700KF's 94th percentile ranking confirms it's among the fastest processors available, though this advantage doesn't translate to meaningful gains in Inside where the GPU dominates.

Settings Recommendations

For 1080p displays, High settings at 198 FPS provide the best experience—the visual upgrade from Medium (317 FPS) is significant, while Ultra (189 FPS) only adds 9 FPS of cost. Since even 189 FPS exceeds most 1080p monitors' refresh rates, players with 240 Hz displays might prefer Medium for the extra frame headroom, but High is the recommended balance.

At 1440p, High settings at 143 FPS are ideal for 144 Hz monitors, delivering a 7 FPS improvement over Ultra (136 FPS) with minimal visual difference. The 228 FPS at Medium is excessive for most displays, but those with 240 Hz panels could justify the drop in quality. Ultra at 136 FPS is also perfectly playable and offers the best image quality for this resolution.

For 4K, the choice depends on display refresh rate. Ultra at 85 FPS and High at 90 FPS are both suitable for 60 Hz displays, with High offering a modest 5 FPS gain over Ultra. Medium at 143 FPS is the only preset that supports 120 Hz or 144 Hz displays, making it the recommended choice for high-refresh 4K monitors. Low at 179 FPS provides maximum smoothness but sacrifices visual fidelity that the game's art style benefits from. Given that High-to-Ultra costs only 5 FPS at 4K, players with 60 Hz displays should enable Ultra for the best visuals, while those with higher refresh rates should select Medium to unlock the full potential of their display.