Inside

The AMD Ryzen 7 5700X3D and AMD Radeon RX 5700 XT combination delivers a strong performance profile for Inside, a Puzzle Platformer that is not demanding by modern standards. The data shows this pairing ranks 1260th out of 1671 tested combos for this game, placing it in the lower-middle tier of the database, but the absolute frame rates are well above playable thresholds. This rank is more a reflection of the sheer number of high-end configurations in the database than a criticism of this pair, as the measured results show it can handle the game with ease at every resolution and setting tested.

How This Combo Ranks

The combo’s rank of 1260 out of 1671 tested combinations indicates that while it is not near the top of the leaderboard, it sits comfortably in a position where the game’s performance is fully usable. For a puzzle platformer like Inside, the priority is smooth, consistent motion rather than extreme frame rates, and this pair delivers that. The data confirms that the combination is not bottlenecked in any meaningful way at standard settings, as even the most demanding preset tested, Ultra at 4K, produced an average of 60.1 FPS. The ranking is skewed by the fact that many tested combos feature significantly newer and more expensive hardware, but within the context of this game’s modest requirements, the 5700X3D and RX 5700 XT perform admirably. The percentile scores for the individual components support this: the CPU is in the 82nd percentile of all CPUs, and the GPU is in the 68th percentile of all GPUs. This suggests the processor is the stronger component relative to its peers, but both are capable enough to avoid any severe performance cliffs in Inside.

GPU Role

The AMD Radeon RX 5700 XT is built on the RDNA 1.0 architecture with a Navi 10 chip, and its specifications are more than adequate for Inside. It features 8 GB of GDDR6 memory on a 256-bit bus, delivering a bandwidth of 448.0 GB/s. The GPU’s base clock is 1605 MHz, with a boost clock of 1905 MHz and a game clock of 1755 MHz. These clocks are high enough to push the frame rates seen in the measured data. For example, at 1080p with Low settings, the card produces an average of 271.9 FPS, which is far beyond any display’s refresh rate. The GPU’s 2560 shading units and 160 texture mapping units handle the game’s simple 2D side-scrolling environments without breaking a sweat. Even at 4K Ultra, where the GPU is most stressed, it maintains an average of 60.1 FPS, showing that the card’s 9.754 TFLOPS of FP32 performance is sufficient. The GPU’s nearest rivals, such as the NVIDIA RTX A5000 Mobile and Intel Arc A350M, have average benchmark scores within 0.9% of the RX 5700 XT, but none of that matters here—the measured FPS in Inside is what counts, and it is excellent.

FAQ

*Q: Can this combo run Inside at 4K with high settings?*

A: Yes. The measured data shows an average of 66.2 FPS at 3840x2160 with High settings, which is smooth for this type of game. Even at Ultra, it stays above 60 FPS with an average of 60.1.

Q: What is the best resolution for maximum frame rates?

A: 1080p gives the highest numbers, with an average of 271.9 FPS on Low settings and 130.4 FPS on Ultra. This resolution is ideal if you have a high-refresh-rate monitor.

Q: Is the CPU or GPU the limiting factor at 4K?

A: The GPU is the limiting factor at 4K. The CPU, an AMD Ryzen 7 5700X3D with 8 cores and 16 threads, has a boost clock of 4.10 GHz and is more than capable of feeding the GPU. The frame rate drop from 1080p to 4K is significant, indicating the graphics card is doing the heavy lifting.

Q: How does the CPU compare to its direct rivals?

A: The Ryzen 7 5700X3D has an average benchmark score of 24673, which is 0.2% higher than the Intel Core i7-1360P and 0.3% higher than the AMD Ryzen 5 7600X3D. It trails the AMD Ryzen AI Max 385 by 0.6%.

*Q: Does the GPU’s 8 GB VRAM cause any issues in Inside?*

A: No. The game is a Puzzle Platformer with simple visuals, and 8 GB of GDDR6 memory is far more than needed. The data shows no VRAM-related performance drops at any resolution or setting.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low settings produce an average of 196.7 FPS, while Ultra drops to 93.6 FPS. This is a difference of 103.1 FPS, showing the visual fidelity impact is significant but still leaves plenty of headroom.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across three resolutions and four quality presets. At 1080p, the combination is exceptionally fast. Low settings yield an average of 271.9 FPS, Medium drops slightly to 221.1 FPS, High comes in at 138.8 FPS, and Ultra remains high at 130.4 FPS. These numbers indicate that at 1080p, the CPU and GPU are both working well below their limits, with the frame rate primarily determined by the game’s engine and the graphics settings.

Moving to 1440p, the averages remain high. Low settings produce 196.7 FPS, Medium hits 158.8 FPS, High delivers 98.4 FPS, and Ultra drops to 93.6 FPS. The scaling from 1080p to 1440p is consistent, with about a 28% reduction in frame rate across all settings, which is expected as pixel count increases. The GPU starts to take on more load, but it is still comfortably above 60 FPS even at the most demanding preset.

At 4K, the GPU is pushed harder. Low settings still deliver an impressive 123.4 FPS, Medium drops to 99.8 FPS, High falls to 66.2 FPS, and Ultra just barely maintains 60.1 FPS. The drop from 1440p to 4K is steeper, reflecting the 2.25x increase in pixel count. The data shows that 4K Ultra is the only combination where the system approaches the limit of smooth gameplay, but it still stays above the 60 FPS mark.

Settings Recommendations

For the best experience, the data suggests that High settings at 4K offers the sweet spot between visual quality and performance. With an average of 66.2 FPS, it provides a stable frame rate that is perfectly smooth for a game like Inside. If you prefer higher refresh rates, 1440p with High settings gives 98.4 FPS, which is still visually excellent and much faster. At 1080p, Ultra settings at 130.4 FPS is the best choice for those with a 144Hz monitor, as it combines maximum visual fidelity with a frame rate that exceeds most displays’ refresh rates. The Low preset offers little benefit in this game since it doesn’t add enough performance to justify the visual downgrade, except at 4K where it jumps to 123.4 FPS. For most players, the recommended path is to prioritize resolution over settings, as the game’s art style benefits more from clarity than from shadow or texture details.

CPU Role

The AMD Ryzen 7 5700X3D is a Zen 3 architecture processor with 8 cores and 16 threads, operating with a base clock of 3.00 GHz and a boost clock of 4.10 GHz. It has a substantial 96 MB of shared L3 cache, which is a key feature for gaming performance. In Inside, the CPU’s role is relatively minor since the game is not processor-intensive, but the data shows it is more than sufficient. The CPU’s average benchmark score of 24673 places it in the 82nd percentile of all CPUs, and its nearest rivals, like the Intel Core i5-11600 and AMD Ryzen 5 7600X3D, have scores within 0.5% of it. This indicates that the 5700X3D is a well-balanced processor that will not hold back the GPU in this title. The single-thread performance, as measured by a 3DMark single-thread score of 804, is adequate for the game’s logic, while the multi-thread performance, with a Cinebench R23 multicore score of 22366, ensures that any background tasks won’t interfere with gameplay. The CPU’s 105 W TDP and AM4 socket compatibility make it a practical choice, but in the context of Inside, its performance is simply not a limiting factor.

Resolution Scaling

The FPS scaling from 1080p to 4K clearly shows that the GPU is the primary limiting component as resolution increases. At 1080p Ultra, the system produces 130.4 FPS, but this drops to 93.6 FPS at 1440p and further to 60.1 FPS at 4K. This represents a 53.8% reduction in frame rate from 1080p to 4K, which is a direct consequence of the fourfold increase in pixel count. The CPU’s performance remains constant across resolutions, as the game’s logic and draw calls are not affected by pixel count. The data shows that at 1080p, the system is likely CPU-limited at lower settings, evidenced by the fact that dropping from Medium to Low only increases FPS from 221.1 to 271.9, a relatively small gain compared to the setting reduction. However, at 4K, the GPU is the clear bottleneck, as the difference between Low and Ultra is much more pronounced (123.4 FPS vs. 60.1 FPS). This pattern is typical for a balanced mid-range system: at lower resolutions, the CPU can become a limiting factor, but at higher resolutions, the GPU takes over. For Inside, the practical takeaway is that the system can handle any resolution, but the best visual experience is achieved at 4K with High settings, where the GPU is still able to maintain a smooth frame rate.