Inside

Inside

AVERAGE FPS
129
excellent

This combination delivers exceptional performance with an average of 129 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 56 60 92 119
1440p QHD 86 94 145 185
1080p Full HD 121 126 207 256

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 119
3840x2160 Medium 92
3840x2160 High 60
3840x2160 Ultra 56
2560x1440 Low 185
2560x1440 Medium 145
2560x1440 High 94
2560x1440 Ultra 86
1920x1080 Low 256
1920x1080 Medium 207
1920x1080 High 126
1920x1080 Ultra 121

Inside with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060, In-Depth Analysis

# Inside: AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 — Performance Analysis

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 2060 delivers a remarkably smooth Inside experience across all tested resolutions and settings, with the data showing this combination ranks 1348th out of 1671 tested combos in the game. The measured frame rates reveal a system that is clearly GPU-limited at 4K but becomes increasingly CPU-bound at lower resolutions, producing a wide performance envelope from 55.9 FPS at 4K Ultra to 256.1 FPS at 1080p Low.

Resolution Scaling

The FPS drops from 1080p to 4K are steep and consistent across all settings, indicating that the rendering load scales heavily with pixel count. At Low settings, the average frame rate falls from 256.1 FPS at 1080p to 184.6 FPS at 1440p (a 28% reduction), then to 119.1 FPS at 4K (a further 35% drop from 1440p). This progressive decline suggests the RTX 2060's 6 GB GDDR6 memory and 336.0 GB/s bandwidth are being taxed increasingly as resolution rises, though the game remains playable even at the most demanding configuration.

At Ultra settings, the scaling is even more dramatic: 121.3 FPS at 1080p drops to 85.6 FPS at 1440p (a 29% reduction), then to 55.9 FPS at 4K (a 35% drop from 1440p). The 4K Ultra result of 55.9 FPS is the only sub-60 FPS figure in the entire dataset, showing that this resolution/settings combination is the breaking point for this hardware pairing. The consistent ~30% per-step reductions across all settings levels indicate that the limiting component is the GPU's raw shading throughput rather than any memory bottleneck, as the scaling pattern remains uniform regardless of quality preset.

The gap between Low and Ultra narrows as resolution increases, which is typical of GPU-bound scenarios. At 1080p, Ultra is 52.6% slower than Low (121.3 vs 256.1 FPS), while at 4K, Ultra is 53.1% slower than Low (55.9 vs 119.1 FPS). This near-identical percentage gap across resolutions confirms that the game's settings primarily affect GPU workload, not CPU overhead, making the RTX 2060 the clear performance arbiter in all configurations tested.

GPU Role

The NVIDIA GeForce RTX 2060, built on the Turing architecture with a TU106 chip fabricated on a 12 nm process, provides the graphical muscle for this pairing. Its 1920 shading units, 120 texture mapping units, and 48 raster output pipelines deliver a measured PassMark G3D score of 14111, placing the GPU at the 58th percentile among all GPUs. The card's boost clock of 1680 MHz and base clock of 1365 MHz, combined with 6 GB of GDDR6 memory on a 192-bit bus, produce a bandwidth of 336.0 GB/s that proves sufficient for Inside's stylized visuals at all but the most extreme settings.

The GPU's performance relative to its nearest rivals shows a tightly clustered field. The RTX 2060's average benchmark score of 16074 puts it 0.5% ahead of the AMD Radeon RX 7600S (15996) and 1.8% ahead of the AMD Radeon Pro W5500 (15786), while trailing the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 by 1.7% (both at 16351). This narrow margin suggests that the RTX 2060's real-world gaming performance in Inside is competitive with these alternatives, though the measured FPS data shows it handles the game's demands comfortably.

The 4K Ultra result of 55.9 FPS is the only instance where the GPU's limitations become apparent. The data indicates that the RTX 2060's 6.451 TFLOPS FP32 throughput and 80.64 GPixel/s pixel rate are sufficient for 60 FPS at 4K only at High settings (60.3 FPS), with Medium producing 92 FPS and Low reaching 119.1 FPS. The 30 RT cores and 240 tensor cores, while present on this Turing card, do not appear to influence Inside's performance, as the game likely does not leverage ray tracing or DLSS features given its 2016 release date.

CPU Role

The AMD Ryzen 5 5600, a 7 nm Zen 3 (Vermeer) processor with 6 cores and 12 threads, provides ample computational headroom for Inside. With a base clock of 3.50 GHz and boost clock of 4.40 GHz, this CPU achieves a Cinebench R23 multicore score of 18309 and a single-core score of 2584, placing it at the 79th percentile among all CPUs. The 32 MB shared L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth ensure that the CPU never becomes a bottleneck at any tested resolution.

The CPU's average benchmark score of 21765 places it in close competition with several server and desktop processors. It sits 0.6% ahead of the Intel Xeon D-1746TER (21635) and 0.6% behind the AMD EPYC 9554P (21899), with the AMD EPYC 9534 (21900) and Intel Core i7-11700F (21957) trailing by 0.6% and 0.9% respectively. This tight clustering suggests that the Ryzen 5 5600's 6-core/12-thread configuration delivers performance comparable to much more expensive enterprise parts in synthetic benchmarks, though Inside's modest CPU demands mean even the 3.50 GHz base clock provides more than enough throughput.

The fact that 1080p Low achieves 256.1 FPS while 4K Low achieves 119.1 FPS indicates that the CPU is capable of feeding the GPU far more frames than the GPU can render at higher resolutions. The 3DMark single-thread score of 882 and 2-thread score of 1737 demonstrate strong per-core performance, which is critical for games like Inside that likely rely on a few primary threads. The CPU's 65 W TDP and 4,150 million transistors on a 74 mm² die make it an efficient choice, though these specifications are secondary to its observed ability to sustain high frame rates without bottlenecking.

FAQ

Q: Can this combo maintain 60 FPS at 4K Ultra settings?

A: No. The measured 4K Ultra average is 55.9 FPS, which falls below the 60 FPS threshold. To achieve 60+ FPS at 4K, you must drop to High settings, which yields 60.3 FPS, or Medium settings for 92 FPS.

Q: What is the maximum frame rate achievable with this hardware?

A: The highest measured average is 256.1 FPS at 1080p with Low settings. At 1440p Low, the average drops to 184.6 FPS, and at 4K Low, it reaches 119.1 FPS.

Q: How does the GPU compare to its closest rivals?

A: The RTX 2060's average benchmark score of 16074 is 0.5% higher than the AMD Radeon RX 7600S (15996) and 1.8% higher than the AMD Radeon Pro W5500 (15786), but 1.7% lower than both the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 (16351 each).

Q: Is the CPU or GPU the limiting factor in this game?

A: The data shows GPU-limiting behavior across all settings. The consistent FPS scaling from 1080p to 4K (e.g., High settings drop from 125.5 to 94.4 to 60.3 FPS) indicates the RTX 2060 is the primary constraint, while the Ryzen 5 5600's 79th percentile CPU ranking shows ample headroom.

Q: What is the best resolution for competitive play?

A: For maximum frame rates, 1080p Low provides 256.1 FPS average. If visual quality matters more, 1080p Medium delivers 207.4 FPS, while 1080p High still offers a smooth 125.5 FPS.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 1348th out of 1671 tested combos for Inside, placing it in the lower portion of the database, though the measured FPS shows the game runs well at most settings.

Settings Recommendations

The data clearly identifies the optimal settings/resolution balance for this hardware. At 4K, High settings are the best choice for a 60 FPS experience, delivering 60.3 FPS average, which is the only 4K preset to reach the 60 FPS threshold. Medium at 4K provides 92 FPS for those with higher refresh rate displays, while Ultra at 55.9 FPS should be avoided if frame pacing is a concern.

At 1440p, Medium settings offer the best balance of visual quality and performance at 145.4 FPS, while High provides 94.4 FPS and Ultra 85.6 FPS. The 1440p Low result of 184.6 FPS is excessive for most displays and suggests diminishing returns beyond Medium. At 1080p, Medium at 207.4 FPS is the recommended sweet spot, as it delivers nearly double the refresh rate of standard 60 Hz displays while maintaining improved visuals over Low. High at 125.5 FPS remains viable for high refresh rate monitors, while Ultra at 121.3 FPS offers marginal visual gains over High for a 3.3% performance cost.

Measured FPS Breakdown

At 1920x1080, the average frame rates are 256.1 FPS (Low), 207.4 FPS (Medium), 125.5 FPS (High), and 121.3 FPS (Ultra). The gap between Low and Medium is 48.7 FPS (19.0%), while the gap between Medium and High is 81.9 FPS (39.5%), and High to Ultra is only 4.2 FPS (3.3%). This indicates that the High to Ultra transition offers minimal performance impact relative to the settings change.

At 2560x1440, the averages are 184.6 FPS (Low), 145.4 FPS (Medium), 94.4 FPS (High), and 85.6 FPS (Ultra). The performance deltas are 39.2 FPS (21.2%) from Low to Medium, 51.0 FPS (35.1%) from Medium to High, and 8.8 FPS (9.3%) from High to Ultra. The proportional gaps differ from 1080p, showing increased GPU pressure at higher resolutions.

At 3840x2160, the averages are 119.1 FPS (Low), 92 FPS (Medium), 60.3 FPS (High), and 55.9 FPS (Ultra). The deltas are 27.1 FPS (22.8%) from Low to Medium, 31.7 FPS (34.5%) from Medium to High, and 4.4 FPS (7.3%) from High to Ultra. The High-to-Ultra gap narrows further at 4K, suggesting the settings difference has diminishing impact as pixel count dominates the rendering cost.

How This Combo Ranks

The AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 combination ranks 1348th out of 1671 tested combos in Inside, placing it in the 19th percentile of all configurations. This ranking reflects the mid-range nature of both components — the CPU at the 79th percentile among all CPUs and the GPU at the 58th percentile among all GPUs — yet the measured frame rates show the pairing is well-matched for this game's requirements.

The CPU's benchmark standing against its nearest rivals (0.6% ahead of the Intel Xeon D-1746TER, 0.6% behind the AMD EPYC 9554P) contrasts with the GPU's more modest position (0.5% ahead of the AMD Radeon RX 7600S, 1.7% behind the AMD Radeon Pro 5600M). This asymmetry suggests that the GPU is the weaker link in the pairing, and the rank reflects this limitation. However, the actual gameplay data demonstrates that the combo delivers playable frame rates in nearly every configuration, with only 4K Ultra falling below 60 FPS. The rank of 1348 out of 1671 may seem low, but it is consistent with the hardware's market positioning and the game's relatively modest graphical demands.

Hardware Specifications

AMD Ryzen 5 5600

Cores / Threads 6 / 12
Base Clock 3500 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 2060

VRAM 6 GB GDDR6
Base Clock
Boost Clock 1680 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 in Inside

Resolution Settings Avg FPS
3840x2160 Low 119.1
3840x2160 Medium 92.0
3840x2160 High 60.3
3840x2160 Ultra 55.9
2560x1440 Low 184.6
2560x1440 Medium 145.4
2560x1440 High 94.4
2560x1440 Ultra 85.6
1920x1080 Low 256.1
1920x1080 Medium 207.4
1920x1080 High 125.5
1920x1080 Ultra 121.3

Inside with Ryzen 5 5600 + Other GPUs

See how Inside performs with the same CPU but different graphics cards.

Inside with RTX 2060 + Other CPUs

See how Inside performs with the same GPU but different processors.

Other Games with Ryzen 5 5600 + RTX 2060

Explore FPS benchmarks for other games using this same hardware combination.