Hitman 2
This combination provides smooth gameplay with an average of 81 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 33 | 46 | 63 |
| 1440p QHD | 50 | 64 | 85 | 116 |
| 1080p Full HD | 77 | 104 | 133 | 181 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Hitman 2 with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 3060 Ti produces a highly distinctive performance curve in Hitman 2, one that shifts dramatically depending on both resolution and preset. The data indicates a system that is profoundly capable at lower resolutions but which begins to struggle as pixel count and graphical fidelity increase. This analysis breaks down the measured frame rates to understand where the bottleneck lies and what settings offer the most balanced experience.
Resolution Scaling
The frame rate drop from 1080p to 4K is severe and tells a clear story about system balance. At 1080p with Low settings, the combo achieves 181.1 FPS. Moving to 1440p Low drops performance to 115.6 FPS, a reduction of 65.5 FPS. At 4K Low, the average falls to 62.6 FPS, which is less than half of the 1080p figure. This steep decline indicates that the graphics card is the primary limiting factor as resolution increases.
The scaling pattern is consistent across all settings. For High settings, the transition from 1080p (104.4 FPS) to 1440p (64.4 FPS) results in a 40 FPS loss, while 4K High drops to 32.6 FPS. The Ultra preset shows the most dramatic scaling issues: 76.6 FPS at 1080p, 50 FPS at 1440p, and just 22.4 FPS at 4K. The data suggests that the RTX 3060 Ti's 8 GB memory buffer and 256-bit bus are saturated quickly when rendering Hitman 2's detailed environments at higher resolutions.
Interestingly, the scaling between 1440p and 4K is less punishing than between 1080p and 1440p. At Medium settings, 1440p yields 85.2 FPS while 4K yields 45.5 FPS — a 39.7 FPS drop. Compare this to the 47.9 FPS drop from 1080p Medium (133.1 FPS) to 1440p Medium. This suggests that at 1440p, the CPU still has headroom to feed the GPU, but at 4K, the GPU is fully occupied with pixel shading and texture work.
CPU Role
The Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, running at a base clock of 3.40 GHz and a boost clock of 4.90 GHz. Its benchmark scores are substantial: Cinebench R23 multicore reaches 38607 and single-core reaches 5450. The 3DMark single-thread score is 944, while the 2-thread score is 1856, indicating strong scaling from one to two threads.
In Hitman 2, a stealth title that typically relies on a few heavily utilized threads, the CPU's single-core performance is critical. The data shows that at 1080p Low (181.1 FPS), the processor is not the bottleneck — the frame rate is high enough to indicate the GPU is doing the heavy lifting. However, the 3DMark 8-thread score of 6598 and max-thread score of 11597 suggest that the CPU has far more compute capability than this game requires at lower resolutions.
The PassMark single-thread score of 3470 places this CPU in the 93rd percentile of all processors. The nearest rivals include the Intel Core i5-14600K with an average score of 49166 (a -0.2% delta) and the Intel Core i5-14600KF at 49367 (-0.6%). These deltas are negligible, meaning the 5950X is effectively tied with these competitors in overall benchmark performance. For a game like Hitman 2, this level of CPU power means the processor will rarely be the limiting factor, except perhaps in the lowest-resolution, highest-frame-rate scenarios where the GPU can keep up.
FAQ
Q: What is the best resolution for this combo to maintain 60+ FPS?
A: The data shows that 1440p with Medium settings (85.2 FPS) or High settings (64.4 FPS) both exceed 60 FPS. At 1080p, even Ultra (76.6 FPS) stays above 60 FPS. At 4K, only Low settings (62.6 FPS) manage to stay above the 60 FPS threshold.
Q: How does the CPU compare to its closest rivals?
A: The Ryzen 9 5950X has an average benchmark score of 49062. Its nearest rival, the Intel Core i5-14600K, scores 49166, a delta of -0.2%. The Intel Core i5-14600KF scores 49367 (-0.6%), and the AMD EPYC 4345P scores 49595 (-1.1%). The differences are under 1.1%, indicating near-identical overall performance.
Q: Does the GPU have enough memory for 4K gaming?
A: The RTX 3060 Ti has 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth. At 4K Ultra, the combo averages 22.4 FPS, which is likely indicative of memory capacity and bandwidth strain. The 4K Low result of 62.6 FPS shows that reducing texture and shadow quality dramatically improves performance, suggesting memory allocation is the primary constraint.
Q: What is the performance difference between Low and Ultra at 1440p?
A: At 1440p, Low settings produce 115.6 FPS while Ultra produces 50 FPS. This is a 65.6 FPS difference. The Medium preset (85.2 FPS) sits between these extremes, and High (64.4 FPS) is actually closer to Ultra than to Medium in terms of frame rate.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: At 1080p Low, the combo reaches 181.1 FPS. This high frame rate suggests the GPU is still the primary constraint, as the CPU's 3DMark max-thread score of 11597 indicates ample headroom. The CPU percentile of 93 places it among the strongest available, so it is unlikely to limit performance even at these high frame rates.
Q: How does the combo rank among all tested configurations?
A: The combo ranks 924th out of 1795 tested combinations. This places it in the middle of the pack, which is consistent with the data showing strong 1080p performance but weaker 4K capability.
How This Combo Ranks
The combo rank of 924 out of 1795 tested combos places this system in the 51st percentile of all tested pairings. This is a middle-of-the-road ranking, which may surprise some given the powerful CPU. However, the ranking reflects the overall balance across all resolutions and settings. The GPU's percentile of 69 (vs all GPUs) is notably lower than the CPU's percentile of 93, indicating that the graphics card is the weaker component in this pairing.
The data reveals that this ranking is driven by the GPU's limitations at higher resolutions. While the CPU is in the 93rd percentile, the GPU sits in the 69th percentile. This imbalance means that in CPU-light scenarios (like Hitman 2 at low settings), the system performs well above its rank. In GPU-heavy scenarios (like 4K Ultra), it performs below average. The rank of 924 suggests that many other combos have better overall balance, likely with more powerful GPUs paired with less powerful CPUs.
Settings Recommendations
The measured data points clearly toward a preferred configuration. At 1080p, the Ultra preset (76.6 FPS) offers the best visual fidelity while maintaining smooth gameplay. This is the only resolution where Ultra is viable. At 1440p, the High preset (64.4 FPS) is the optimal choice, as it stays above 60 FPS while providing significantly better visuals than Medium (85.2 FPS). The Ultra preset at 1440p (50 FPS) is playable but may feel less responsive.
For 4K gaming, the data indicates that only the Low preset (62.6 FPS) provides an acceptable experience. The Medium preset (45.5 FPS) and High preset (32.6 FPS) fall below the 60 FPS threshold, and Ultra (22.4 FPS) is effectively unplayable. Users prioritizing 4K should use Low settings or consider lowering the resolution. The recommendation is to target 1440p High for the best balance of visual quality and frame rate, as this configuration achieves 64.4 FPS with the High preset's enhanced effects.
Measured FPS Breakdown
At 1920x1080, the frame rates are consistently high. Low settings produce 181.1 FPS, Medium produces 133.1 FPS, High produces 104.4 FPS, and Ultra produces 76.6 FPS. The spread from Low to Ultra is 104.5 FPS, showing the significant impact of graphical settings on performance.
At 2560x1440, performance drops considerably. Low settings yield 115.6 FPS, Medium yields 85.2 FPS, High yields 64.4 FPS, and Ultra yields 50 FPS. The spread narrows to 65.6 FPS, indicating that the GPU is becoming the limiting factor.
At 3840x2160, the results are the most constrained. Low settings achieve 62.6 FPS, Medium achieves 45.5 FPS, High achieves 32.6 FPS, and Ultra achieves 22.4 FPS. The spread from Low to Ultra is 40.2 FPS, showing that even the lowest settings cannot fully compensate for the resolution's demands. The GPU's 16.20 TFLOPS of FP32 performance and 133.2 GPixel/s pixel rate are insufficient for smooth 4K Ultra gaming in Hitman 2, a title released in 2018 with a demanding rendering pipeline.
Hardware Specifications
AMD Ryzen 9 5950X
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 5950X + NVIDIA GeForce RTX 3060 Ti in Hitman 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 62.6 |
| 3840x2160 | Medium | 45.5 |
| 3840x2160 | High | 32.6 |
| 3840x2160 | Ultra | 22.4 |
| 2560x1440 | Low | 115.6 |
| 2560x1440 | Medium | 85.2 |
| 2560x1440 | High | 64.4 |
| 2560x1440 | Ultra | 50.0 |
| 1920x1080 | Low | 181.1 |
| 1920x1080 | Medium | 133.1 |
| 1920x1080 | High | 104.4 |
| 1920x1080 | Ultra | 76.6 |
Hitman 2 with Ryzen 9 5950X + Other GPUs
See how Hitman 2 performs with the same CPU but different graphics cards.
Hitman 2 with RTX 3060 Ti + Other CPUs
See how Hitman 2 performs with the same GPU but different processors.
Other Games with Ryzen 9 5950X + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.