Hitman 2

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5090 pairing in Hitman 2 presents a stark contrast in generational roles. The CPU is a 6-core, 12-thread Zen 3 part, built on a 7 nm process, while the GPU is a Blackwell 2.0 flagship built on a 5 nm process. This combination produces results that are heavily dictated by resolution, with the CPU providing the raw throughput needed at lower settings and the GPU’s massive memory bandwidth dominating at higher resolutions.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600F is a 5000-series desktop processor with 6 physical cores and 12 threads, operating at a base clock of 3.00 GHz and a boost clock of 4.00 GHz. Its cache configuration includes 64 KB of L1 cache per core, 512 KB of L2 cache per core, and a 32 MB shared L3 cache. The CPU supports DDR4 memory over a dual-channel bus, providing 51.2 GB/s of bandwidth. This is a Zen 3 architecture part, codenamed Vermeer, with 4,150 million transistors on a 74 mm² die.

In the measured FPS data, the CPU’s influence is most apparent at 1080p and at lower settings. At 1920x1080 with Low settings, the combo reaches 247 FPS average. This high frame rate suggests the CPU can feed the GPU efficiently when the graphical load is light. However, the data shows a clear bottleneck shift: at 3840x2160 with Low settings, the average FPS drops to 117, which is a 53% reduction from the 1080p Low figure. This indicates that at 4K, even with Low settings, the workload moves toward the GPU, but the CPU still needs to maintain frame pacing.

The CPU’s benchmark scores support its role. Its passmark_multithread score is 19,236, while its passmark_single_thread score is 2,872. The single-thread performance is critical for Hitman 2, a game that often relies on a few main threads for game logic and AI. The 5600F’s boost clock of 4.00 GHz is modest by modern standards, but the architecture’s efficiency allows it to reach a passmark_physics score of 1,043. The data shows this CPU sits in the 85th percentile of all CPUs, with an average benchmark score of 36,945.

When compared to its nearest rivals, the 5600F is essentially at parity. The Intel Core Ultra 5 225 has an avgScore of 36,938, a delta of 0%. The AMD Ryzen 5 5500X3D is slightly ahead at 37,018, a delta of -0.2%. The AMD Ryzen AI 7 PRO 450 scores 37,093, a delta of -0.4%, and the Intel Core i9-12900T scores 37,112, a delta of -0.5%. These deltas are negligible, meaning the 5600F’s performance in general compute is right in line with these alternatives. For Hitman 2 specifically, the CPU’s 12 threads provide enough parallelism for the game’s engine, but the measured FPS at 4K Ultra (49 FPS) suggests the GPU is the limiting factor there, not the CPU.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5090 is the dominant component in this pairing. It features 32 GB of GDDR7 memory on a 512-bit bus, yielding a bandwidth of 1.79 TB/s. Its memory clock is listed as 1750 MHz, or 28 Gbps effective. The GPU core is based on the GB202 chip, with a base clock of 2017 MHz and a boost clock of 2407 MHz. It has 21,760 shading units, 680 TMUs, and 176 ROPs. The GPU’s compute capabilities are substantial, with an FP32 rating of 104.8 TFLOPS and a texture rate of 1,636.8 GTexel/s.

The GPU’s role in Hitman 2 is clear from the resolution scaling. At 1920x1080, the average FPS ranges from 143 (Ultra) to 247 (Low). At 2560x1440, the range is 91 (Ultra) to 213 (Low). At 3840x2160, the range drops to 49 (Ultra) to 117 (Low). The step from 1440p to 4K is particularly punishing: at High settings, the average FPS drops from 124 to 66, a 47% decrease. This is due to the sheer pixel count, but the RTX 5090’s 32 GB VRAM is never a constraint here, as Hitman 2 is a 2018 title with modest memory requirements.

The GPU’s benchmark scores place it in the 92nd percentile of all GPUs, with an average benchmark score of 79,842. Its 3dmark_steel_nomad_dx12 score is 18,355, and its passmark_g3d score is 39,650. The nearest rivals are all data-center or mobile parts, which is unusual. The NVIDIA Tesla P100 PCIe 16 GB has an avgScore of 79,605, a delta of 0.3%. The Tesla P100 PCIe 12 GB scores 79,396, a delta of 0.6%. The AMD Radeon RX 6850M XT scores 78,940, a delta of 1.1%, and the AMD Radeon Pro Vega 64X scores 80,959, a delta of -1.4%. These deltas show the RTX 5090 is in a similar performance class to these parts in synthetic benchmarks, but the real-world gaming results in Hitman 2 are far higher than what those older parts could achieve.

The GPU’s power and size are notable, with a TDP of 575 W and a dual-slot design. It requires a 16-pin power connector and a suggested PSU of 950 W. This is a high-end part, and the data reflects that it is not the bottleneck at 1080p, where the CPU limits frame rates. At 4K, the GPU’s raw compute is what drives the 49 FPS Ultra result, which is still playable but not high-refresh territory.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the average FPS at 3840x2160 with Ultra settings?

A: The measured average FPS is 49 at 3840x2160 with Ultra settings. This is the lowest average FPS recorded across all tested configurations in the data.

Q: Is the CPU or GPU more likely to be the bottleneck at 1080p Low settings?

A: The data indicates the CPU is the limiting factor at 1920x1080 Low, where the average FPS is 247. This is the highest FPS recorded, and it suggests the GPU is not fully utilized at this resolution and setting.

Q: How does the average FPS change from 1440p to 4K at High settings?

A: At 2560x1440 High, the average FPS is 124. At 3840x2160 High, the average FPS drops to 66. This is a 58 FPS reduction, or approximately a 47% decrease in performance.

Q: What is the RTX 5090’s launch MSRP?

A: The launch MSRP for the NVIDIA GeForce RTX 5090 is 1,999 USD.

Q: What are the minimum and maximum FPS recorded at 1920x1080 with Medium settings?

A: At 1920x1080 with Medium settings, the minimum FPS is 189 and the maximum FPS is 256, with an average of 223 FPS.

Q: How does the Ryzen 5 5600F compare to the AMD Ryzen 5 5500X3D in benchmark scores?

A: The Ryzen 5 5600F has an average benchmark score of 36,945, while the AMD Ryzen 5 5500X3D has an average score of 37,018. This is a delta of -0.2%, meaning the 5500X3D is marginally faster in general benchmarks.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 5600F and the NVIDIA GeForce RTX 5090 ranks 170th out of 3,001 tested combos in Hitman 2. This places it in the top 5.7% of all configurations tested. This is a strong ranking, but it is not at the very top. The fact that this combo does not crack the top 100 suggests that other pairings, likely with higher-end CPUs, achieve better results in this specific game.

The ranking is likely held back by the CPU. While the RTX 5090 is a top-tier GPU, the 5600F is a mid-range part from a 2025 release. In a game like Hitman 2, which is not heavily multi-threaded, the CPU’s single-thread performance and clock speed can limit the maximum frame rate. The data supports this: at 1080p Low, the combo hits 247 FPS, but a faster CPU could potentially push that higher. At 4K Ultra, the combo’s 49 FPS is respectable, but it shows that even the RTX 5090 cannot overcome the CPU’s overhead in this title.

The ranking of 170 out of 3,001 is a composite measure. It considers all settings and resolutions. The combo’s performance is more competitive at higher resolutions where the GPU dominates. For instance, at 4K Medium, the average FPS is 87, which is a playable frame rate. However, at 1080p, the combo’s FPS numbers are high, but the ranking may be affected by combos with faster CPUs that achieve even higher frame rates. The data shows this is a capable pairing, but not an optimal one for maximizing FPS in Hitman 2.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS data provides a clear picture of which settings are viable at each resolution. At 3840x2160, the Ultra preset yields an average of 49 FPS, which is on the edge of playability. The High preset jumps to 66 FPS, which is a more comfortable margin for a steady experience. The Medium preset offers 87 FPS, which is the best balance for smooth gameplay at 4K. The Low preset reaches 117 FPS, but this sacrifices visual fidelity. For a 4K display, Medium is the recommended preset, as it provides a 74 FPS minimum and a 101 FPS maximum, indicating stable frame pacing.

At 2560x1440, the situation is more flexible. The Ultra preset delivers 91 FPS, which is solid for high-refresh monitors. The High preset at 124 FPS is excellent, and the Medium preset at 164 FPS is ideal for 144Hz displays. The Low preset hits 213 FPS, which is only useful for extreme competitive play. For most users at 1440p, the High preset is the best choice, as it offers a high frame rate without the visual compromises of Medium. The data shows that the combo can easily handle 1440p at high refresh rates.

At 1920x1080, all presets are playable. The Ultra preset at 143 FPS is the highest quality option and still offers a high frame rate. The Medium preset at 223 FPS is the sweet spot for 240Hz monitors, and the Low preset at 247 FPS is the maximum frame rate achievable. The High preset at 194 FPS is also a strong option. Given the CPU limitation at this resolution, the Ultra preset is recommended, as it provides a high quality image while still exceeding 140 FPS. The data suggests there is no reason to lower settings at 1080p, as the GPU has ample headroom.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data is broken down by resolution and settings, with average FPS provided for all configurations and minimum/maximum FPS provided for Medium settings only.

1920x1080:

• Low: Average FPS is 247. This is the highest average FPS recorded in the entire dataset.
• Medium: Average FPS is 223, with a minimum of 189 and a maximum of 256.
• High: Average FPS is 194.
• Ultra: Average FPS is 143.

2560x1440:

• Low: Average FPS is 213.
• Medium: Average FPS is 164, with a minimum of 140 and a maximum of 189.
• High: Average FPS is 124.
• Ultra: Average FPS is 91.

3840x2160:

• Low: Average FPS is 117.
• Medium: Average FPS is 87, with a minimum of 74 and a maximum of 101.
• High: Average FPS is 66.
• Ultra: Average FPS is 49. This is the lowest average FPS recorded.

The progression across resolutions is consistent. At Low settings, the FPS drops from 247 at 1080p to 213 at 1440p to 117 at 4K. At Ultra settings, the FPS drops from 143 at 1080p to 91 at 1440p to 49 at 4K. The scaling is not linear; the jump from 1440p to 4K is more severe than the jump from 1080p to 1440p, particularly at lower settings. The data shows that the RTX 5090’s performance is best utilized at 1440p, where it can maintain high frame rates even at Ultra settings. At 4K, the combo is still capable, but users must accept lower settings to achieve smooth gameplay.