Hard West
This combination provides smooth gameplay with an average of 109 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 51 | 64 | 81 |
| 1440p QHD | 74 | 94 | 127 | 155 |
| 1080p Full HD | 116 | 151 | 169 | 183 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Hard West with Intel Core i5-10400F + AMD Radeon RX 9070, In-Depth Analysis
The Intel Core i5-10400F paired with the AMD Radeon RX 9070 produces a distinctive performance curve in Hard West, a 2015 turn-based tactics title. The data shows a system that scales predictably with resolution, yet reveals a notable shift in bottleneck behavior as settings and pixel counts rise. This combination ranks 651st out of 1,699 tested combos, placing it in the upper-middle tier of the database.
Resolution Scaling
The measured FPS data reveals a steep but logical decline as resolution increases. At 1080p High settings, the combo delivers 151.4 FPS average. Moving to 1440p High drops that to 94 FPS, a reduction of approximately 38%. At 4K High, the average falls further to 50.6 FPS, representing another 46% drop from the 1440p figure. This scaling pattern suggests the system is transitioning from a CPU-bound state at lower resolutions to a GPU-bound state at 4K.
The gap between 1080p and 1440p is stark when comparing Low settings. At 1080p Low, the system hits 182.7 FPS, while 1440p Low manages 155 FPS — a 15% decrease. However, the 4K Low result of 81.1 FPS shows a much larger 48% drop from 1440p Low. This disproportionate decline at 4K indicates the RX 9070 is becoming the primary limiting factor at that resolution, even on the least demanding settings.
The Ultra preset tells a similar story. At 1080p Ultra, the combo achieves 116.3 FPS, which drops to 73.7 FPS at 1440p Ultra (a 37% decline) and then to 40.2 FPS at 4K Ultra (a 45% decline from 1440p). The consistency of these percentage drops across presets suggests a well-balanced system that scales linearly with pixel count, though the absolute numbers at 4K Ultra — just 40.2 FPS — indicate that this resolution pushes the hardware to its limits.
Notably, the Medium preset at 1080p produces 169.3 FPS, which is higher than the High preset at 1440p (94 FPS). This demonstrates that resolution has a more pronounced effect on performance than settings quality in this configuration. The data indicates that for smooth 60 FPS gameplay, the system can handle 1440p High comfortably (94 FPS) but falls short at 4K Ultra (40.2 FPS).
GPU Role
The AMD Radeon RX 9070 is a substantial piece of silicon, built on the RDNA 4.0 architecture with a 4 nm process from TSMC. It packs 53,900 million transistors on a 357 mm² die. The GPU operates with a base clock of 1330 MHz and a boost clock of 2520 MHz, with a game clock rated at 2070 MHz. Memory runs at 2518 MHz, delivering 20.1 Gbps effective speed across a 256-bit bus.
The 16 GB of GDDR6 memory provides 644.6 GB/s of bandwidth. This capacity is generous for a 2015 title like Hard West, which was designed for the hardware of its era. The GPU's 3,584 shading units, 224 texture mapping units, and 128 render output units give it substantial raw throughput, reflected in its 322.6 GPixel/s pixel rate and 564.5 GTexel/s texture rate.
In benchmark tests, the RX 9070 scores 25,381 in Passmark G3D and 133,741 in Geekbench OpenCL. Its Vulkan score reaches 165,532. These figures place it in the 79th percentile of all GPUs. Compared to its nearest rivals, the RX 9070 sits within a narrow band: it trails the NVIDIA A2 by 0.2% but leads the NVIDIA Quadro GV100 by 0.3% and the AMD Radeon HD 7970 by 0.7%.
The GPU's DirectX 12 Ultimate support (12_2) ensures full compatibility with modern APIs, though Hard West is an older title that likely relies on older DirectX paths. The Passmark DirectX 11 score of 281 and DirectX 12 score of 74 suggest the card performs relatively better under the legacy API that this game would use. The 220 W TDP and dual-slot design indicate a mid-range power envelope, with a suggested 550 W PSU.
CPU Role
The Intel Core i5-10400F provides six cores and twelve threads based on the Comet Lake architecture built on Intel's 14 nm process. It runs with a base clock of 2.90 GHz and a boost clock of 4.30 GHz, with a 65 W TDP. The CPU features a three-tier cache structure: 64 KB L1 per core, 256 KB L2 per core, and 12 MB shared L3.
Memory support is limited to dual-channel DDR4 with 42.7 GB/s bandwidth. The CPU connects via PCIe Gen 3 with 16 lanes. Released on 2020-04-29, this processor is several generations old but remains in active production.
Synthetic benchmarks show a solid mid-range performer. Cinebench R23 multi-core scores 10,297, while single-core reaches 1,453. Geekbench multi-core hits 5,783 and single-core 1,454. The Passmark multithread score is 12,115 with a single-thread score of 2,541. These results place the CPU in the 73rd percentile of all processors.
The CPU's nearest rivals in the database include the AMD EPYC 7552 (0.4% ahead), AMD Ryzen 3 7320C (0.8% behind), Intel Core i5-8500 (1.1% behind), and AMD Ryzen Embedded V2546 (1.2% behind). This clustering indicates the i5-10400F performs in a very tight band around its expected level.
For Hard West, a turn-based tactics game from 2015, the CPU's six cores and twelve threads are more than sufficient. The game's logic and AI processing would rarely stress all threads simultaneously, but the solid single-thread performance (1,453 in Cinebench R23) ensures responsive turn processing. The 4.30 GHz boost clock helps maintain high FPS even at 1080p Low, where the system reaches 182.7 FPS, suggesting the CPU is not the limiting factor at that resolution.
How This Combo Ranks
The combination of Intel Core i5-10400F and AMD Radeon RX 9070 ranks 651st out of 1,699 tested combos in Hard West. This puts it in the 62nd percentile of all combinations, meaning roughly 38% of tested systems perform better in this title.
The ranking reflects an interesting mismatch: the GPU is a modern, high-end part (79th percentile among GPUs), while the CPU is a mid-range older processor (73rd percentile). In a game like Hard West, which is not graphically demanding by modern standards, the CPU's contribution to the ranking becomes more significant. The 1080p results, where the CPU has more influence, show the combo achieving 151.4 FPS at High settings — a strong result. At 4K Ultra, the 40.2 FPS result is far less competitive, showing how the GPU becomes the bottleneck.
The data suggests this combo is best suited for 1080p or 1440p gaming. At 1440p High, the 94 FPS result is smooth and playable, while 4K requires dropping to Low settings (81.1 FPS) for acceptable performance. The Ultra preset at 1440p (73.7 FPS) remains playable, but the 4K Ultra result falls below the 60 FPS threshold.
The benchmark averages support this positioning. The GPU's average benchmark score of 34,780 and the CPU's 14,168 create a pairing where neither component dramatically outperforms the other in this specific title. The combination lands in the upper-middle of the pack, which is consistent with a mid-range CPU paired with a high-end GPU — the CPU holds the combo back from higher rankings in this CPU-influenced title.
FAQ
Q: What frame rate can I expect at 1440p with High settings?
A: The measured data shows an average of 94 FPS at 2560x1440 with High settings. This is a comfortable result for smooth gameplay in Hard West.
Q: Can this combo handle 4K Ultra settings?
A: No. At 4K Ultra, the average FPS drops to 40.2, which is below the 60 FPS threshold for smooth play. Even 4K Medium only reaches 64.1 FPS, while 4K Low achieves 81.1 FPS.
Q: How does the RX 9070 compare to its nearest GPU rivals?
A: The RX 9070 trails the NVIDIA A2 by 0.2% but leads the NVIDIA Quadro GV100 by 0.3%, the AMD Radeon HD 7970 by 0.7%, and the AMD Radeon PRO W6400 by 0.8% in average benchmark scores.
Q: Is the CPU or GPU the bottleneck in this game?
A: The data indicates the bottleneck shifts with resolution. At 1080p, the system achieves 182.7 FPS on Low settings, suggesting the CPU can feed the GPU effectively. At 4K, the significant FPS drops (from 81.1 at Low to 40.2 at Ultra) indicate the GPU becomes the limiting factor.
Q: What is the CPU's single-thread performance?
A: The Intel Core i5-10400F scores 1,453 in Cinebench R23 single-core and 1,454 in Geekbench single-core. Its Passmark single-thread score is 2,541.
Q: How much video memory does the RX 9070 have?
A: The GPU comes with 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. This is ample for Hard West, a 2015 title.
Hardware Specifications
Intel Core i5-10400F
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-10400F + AMD Radeon RX 9070 in Hard West
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 81.1 |
| 3840x2160 | Medium | 64.1 |
| 3840x2160 | High | 50.6 |
| 3840x2160 | Ultra | 40.2 |
| 2560x1440 | Low | 155.0 |
| 2560x1440 | Medium | 127.0 |
| 2560x1440 | High | 94.0 |
| 2560x1440 | Ultra | 73.7 |
| 1920x1080 | Low | 182.7 |
| 1920x1080 | Medium | 169.3 |
| 1920x1080 | High | 151.4 |
| 1920x1080 | Ultra | 116.3 |
Hard West with ii5-10400F + Other GPUs
See how Hard West performs with the same CPU but different graphics cards.
Hard West with RX 9070 + Other CPUs
See how Hard West performs with the same GPU but different processors.
Other Games with ii5-10400F + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.