Greedfall

Greedfall, a 2019 Action RPG, presents a demanding workload where the Intel Core Ultra 5 225 and NVIDIA GeForce RTX 3070 Ti combination shows a clear division of labor. The data indicates that at 1080p and 1440p, the GPU is the primary driver of performance, while at 4K, the system scales predictably with the graphics card's capabilities, making this combo a robust choice for high-refresh-rate 1440p gaming and a solid 4K performer at adjusted settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core Ultra 5 225 is a 10-core, 10-thread desktop processor based on the Arrow Lake architecture, built on a 3nm process by TSMC. It operates with a base clock of 3.30 GHz and a boost clock of 4.90 GHz, featuring a shared 20 MB L3 cache and a dual-channel DDR5 memory interface with a bandwidth of 102.4 GB/s. Its benchmark results, such as a Cinebench R23 multi-core score of 25891 and a single-core score of 3655, place it in the 85th percentile of all CPUs, indicating strong overall processing capability.

In the context of Greedfall, the CPU's role is to feed the GPU with enough data to maintain high frame rates. The measured FPS data shows that at 1080p with Low settings, the combo achieves an average of 214 FPS. This high frame rate, which is well beyond typical 60Hz or 144Hz displays, suggests that the Core Ultra 5 225 is not a bottleneck at this resolution and setting level. The CPU's strong single-thread performance, evidenced by its Passmark single-thread score of 4412, is likely a key factor in handling the game's game logic and AI, allowing the GPU to render frames without waiting on the processor.

However, as resolution increases, the performance burden shifts. At 1440p High, the average FPS drops to 106, and at 4K High, it further drops to 63. This scaling pattern indicates that while the CPU is capable, the game's frame rate becomes increasingly dependent on the GPU's pixel-pushing power at higher resolutions. The processor's 65W TDP and 10-core configuration are sufficient for this title, as the frame rates do not show signs of CPU-induced stuttering or severe drops that would indicate a processing limit. The data suggests a balanced pairing where the CPU provides ample headroom for the GPU to operate, particularly at 1440p where the average FPS remains high across most settings.

How This Combo Ranks — use comboRankInGame vs other tested combos

This specific configuration of the Intel Core Ultra 5 225 and NVIDIA GeForce RTX 3070 Ti ranks 1012 out of 2938 tested combos in Greedfall. This places it in the upper third of all tested systems, indicating a high-performing combination that is better than roughly 65% of the other pairings in the database. This rank is a strong indicator that the system is well-suited for this game, offering a performance level that would satisfy most users seeking a smooth experience.

The rank is a composite assessment of the system's ability to handle the game across various resolutions and settings. For context, the CPU alone is in the 85th percentile of all CPUs, and the GPU is in the 75th percentile of all GPUs. The combo's rank of 1012, while not as high as either individual component's percentile, reflects the balance of the pairing. It suggests that while each component is strong on its own, the combined performance is not bottlenecked by a weak link, but rather represents a cohesive unit that delivers consistent results. This is supported by the measured FPS data, which shows playable frame rates even at 4K Ultra (40 FPS), demonstrating that the system has the raw power to handle the game's most demanding settings, even if it sacrifices some fluidity for visual fidelity.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data provides clear evidence of how the system scales with resolution. At High settings, the average FPS drops from 153 at 1080p to 106 at 1440p, and then to 63 at 4K. This represents a 31% drop from 1080p to 1440p and a further 41% drop from 1440p to 4K. This pattern is typical of a GPU-limited scenario, where the graphics card's rendering workload increases exponentially with pixel count.

The scaling from 1080p to 1440p shows a significant performance hit, which is common for a high-end GPU like the RTX 3070 Ti. The drop from 1440p to 4K is even more pronounced, indicating that the GPU is struggling to maintain the same level of performance as the pixel count doubles. This is further confirmed by the Low settings data: 214 FPS at 1080p, 149 FPS at 1440p, and 89 FPS at 4K. The proportional drops are similar, reinforcing that the GPU is the limiting factor.

If the CPU were the bottleneck, we would expect to see a smaller performance delta between 1080p and 1440p, as the CPU workload would remain relatively constant while the GPU workload increases. The fact that the FPS drops consistently across all settings with resolution increases strongly indicates that the RTX 3070 Ti is the component that defines the performance ceiling in Greedfall. The CPU is sufficiently powerful to keep up with the GPU's demands at all tested resolutions, making the GPU the primary target for any performance tuning.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the average frame rate for this combo at 1440p with High settings?

A: At 2560x1440 with High settings, the average frame rate is 106 FPS.

Q: How does the performance at 4K Ultra compare to 1080p Ultra?

A: The average FPS at 4K Ultra is 40, which is significantly lower than the 98 FPS achieved at 1080p Ultra. This indicates a 59% reduction in frame rate when moving from 1080p to 4K at the highest settings.

Q: Is the CPU or GPU more likely to be the limiting factor in this game?

A: The data suggests the GPU is the limiting factor. The consistent FPS drops with increasing resolution across all settings (e.g., from 153 FPS at 1080p High to 63 FPS at 4K High) are characteristic of a GPU-bound workload, as the CPU's workload does not scale with resolution.

Q: What is the best resolution for achieving a high refresh rate experience?

A: At 1080p, the combo achieves over 150 FPS on High settings (153 FPS) and 98 FPS on Ultra, making it ideal for high-refresh-rate monitors. At 1440p, it still maintains over 100 FPS on High (106 FPS), which is suitable for most 144Hz displays.

Q: What are the minimum and maximum FPS recorded at 1440p Medium settings?

A: At 2560x1440 with Medium settings, the minimum FPS is 99 and the maximum FPS is 134, with an average of 117 FPS.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture using the GA104 chip on an 8nm process from Samsung. It features 8 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 608.3 GB/s. Its clocks are set at a base of 1575 MHz and a boost of 1770 MHz, with memory running at 19 Gbps effective. The GPU includes 6144 shading units, 192 texture mapping units, and 96 raster output units, delivering a FP32 performance of 21.75 TFLOPS. It has a 290W TDP and is a dual-slot card.

In Greedfall, the GPU's role is central to the visual experience. The 8 GB of VRAM is sufficient for the game's textures and assets at the tested resolutions, as evidenced by the playable frame rates even at 4K. The GPU's raw compute power is what drives the high frame rates seen at 1080p and 1440p. For instance, the 153 FPS average at 1080p High suggests that the RTX 3070 Ti has ample headroom for this title, easily handling the rendering workload.

The GPU's performance percentile of 75 places it above average, and its benchmark scores, such as a 3DMark Steel Nomad DX12 score of 3478 and a Passmark G3D score of 23356, confirm its strong capabilities. The scaling of FPS with resolution is directly tied to the GPU's pixel throughput. The data shows that the RTX 3070 Ti is a capable 1440p card for this game, and it can handle 4K, but with necessary compromises in settings to achieve higher frame rates. The GPU's specifications, particularly its memory bandwidth and shading units, are well-matched to the demands of a 2019 Action RPG like Greedfall.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS data provides a clear picture for optimizing the gaming experience. For users targeting a standard 60 FPS experience, the 4K High preset, with an average of 63 FPS, is the most demanding setting that achieves this target. This makes it the best choice for 4K displays, offering a balance of visual fidelity and smooth gameplay. For those with high-refresh-rate 4K monitors, the 4K Medium preset, which averages 70 FPS, is also a viable option, though it may not fully saturate a 144Hz panel.

At 1440p, the High preset delivers an excellent 106 FPS average, making it the recommended setting for a high-refresh-rate experience. It provides a significant visual upgrade over Medium (117 FPS) and Low (149 FPS) while maintaining a frame rate that is well-suited for 144Hz or 165Hz monitors. For users with 240Hz displays, the Low preset at 1440p, with its 149 FPS average, is the only way to get closer to that refresh rate, but the visual compromise may be significant.

At 1080p, the Ultra preset yields an average of 98 FPS, providing the best visual quality while still remaining above 60 FPS. The High preset at 153 FPS is ideal for 144Hz monitors, and the Medium preset at 168 FPS can cater to even higher refresh rates. The Low preset at 214 FPS is only recommended for competitive play where maximum frame rate is prioritized over visuals. Overall, the data suggests that the sweet spot for this combo is either 1440p High for a balance of quality and speed, or 4K High for a premium visual experience at 60 FPS.