Greedfall
This combination offers playable performance with an average of 31 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 18 | 17 | 23 |
| 1440p QHD | 19 | 30 | 33 | 39 |
| 1080p Full HD | 27 | 45 | 46 | 60 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Greedfall with Intel Core i5-9400 + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The Intel Core i5-9400 paired with the NVIDIA GeForce GTX 1050 Ti delivers a strictly entry-level experience in Greedfall, with performance data showing a combination that is heavily constrained by the graphics card at higher resolutions. This pairing, ranked 1678 out of 1705 tested combos in this title, places it in the bottom 2% of all configurations, indicating a fundamental mismatch for achieving smooth, high-fidelity gameplay. The measured frames per second (FPS) reveal a system that can manage playable frame rates at 1080p with reduced settings but falls apart quickly as resolution and graphical demands increase.
Resolution Scaling
The benchmark data illustrates a steep performance cliff as resolution scales upward from 1920x1080 to 3840x2160. At 1080p with High settings, the combo produces an average of 45.2 FPS, which drops to 30.3 FPS at 2560x1440—a 33% reduction in frame rate. Moving to 4K at the same High preset yields just 17.5 FPS, representing a 61% decrease from the 1440p result and a 61% drop from the 1080p baseline. This pattern strongly indicates that the GTX 1050 Ti's 4 GB of GDDR5 memory and 112.1 GB/s bandwidth are the primary limiting factors, as the pixel throughput requirements at 4K overwhelm the GPU's 2.138 TFLOPS of compute power.
The scaling behavior across settings at each resolution reinforces this conclusion. At 1080p, the spread between Low (60.4 FPS) and Ultra (26.9 FPS) is 33.5 FPS, showing that the GPU has some headroom to work with at the lowest resolution. However, at 1440p, the same settings range produces a gap of only 19.7 FPS (38.9 to 19.2), and at 4K, the difference shrinks to just 9 FPS (23 to 14). This compression of the settings range at higher resolutions is a classic symptom of a GPU-bound scenario—the graphics card is already saturated, so reducing visual quality yields diminishing returns. The CPU, a 6-core Coffee Lake part with a 4.10 GHz boost clock, is likely not the bottleneck here; its Cinebench R23 multi-core score of 7969 places it in the 50th percentile of all CPUs, which is adequate for a 2019 action RPG, while the GPU's PassMark G3D score of 6340 sits at only the 30th percentile.
FAQ
Q: What is the maximum average frame rate achievable with this combo in Greedfall?
A: The highest measured average FPS is 60.4, achieved at 1920x1080 with Low settings. This is the only configuration in the dataset that reaches or exceeds the 60 FPS threshold.
Q: How does this combo rank compared to other tested configurations in Greedfall?
A: The Intel Core i5-9400 + GTX 1050 Ti combination ranks 1678th out of 1705 tested combos, placing it in the bottom 2% of all systems benchmarked for this game.
Q: Is the GPU or CPU the primary performance limiter at 4K resolution?
A: The data indicates the GPU is the limiting component. At 3840x2160, frame rates range from 14.0 (Ultra) to 23.0 (Low), with the settings spread compressing to just 9 FPS, which shows the graphics card is fully saturated regardless of quality preset.
Q: What is the performance difference between Medium and High settings at 1440p?
A: At 2560x1440, Medium settings produce an average of 32.5 FPS, while High settings yield 30.3 FPS. The difference is only 2.2 FPS, suggesting that the High preset offers minimal visual cost for a slight fidelity gain in this specific case.
Q: How does the GTX 1050 Ti compare to its nearest rival in synthetic benchmarks?
A: The GPU's average benchmark score of 5316 is nearly identical to the NVIDIA GeForce 930A, which scores 5317, a delta of 0%. It also sits within 0.4% of the GeForce 940M (5297) and 0.7% of the AMD Radeon R7 240 (5280).
Q: What is the lowest playable configuration based on the measured data?
A: At 1920x1080 with Medium settings, the combo averages 46.1 FPS, which is generally considered acceptable for a single-player action RPG. The Low preset at 1080p hits 60.4 FPS, but Medium offers a better visual balance while still staying above 45 FPS.
How This Combo Ranks
The combo's rank of 1678 out of 1705 tested configurations places it in the bottom 1.6% of all systems in the database for Greedfall. This is a remarkably low standing that reflects the fundamental limitations of the GTX 1050 Ti, which was released in 2016 and is now end-of-life, paired with a mid-range CPU from 2018. The GPU's percentile of 30 versus all GPUs is the dominant factor here; the CPU's 50th percentile standing is less of a concern. The nearest rivals for the GPU—the GeForce 930A, 940M, R7 240, and R7 M445—are all low-end or mobile-class parts, confirming that the 1050 Ti sits at the very bottom of desktop discrete GPU performance tiers.
This ranking has practical implications. With a delta of 0% against the GeForce 930A in average benchmark score, the 1050 Ti is essentially equivalent to a notebook-class part, which explains why the 4K results are so poor. The CPU, meanwhile, is positioned between the Core i3-10305 (delta 0.2%) and the Core i7-8809G (delta -0.6%), showing it is a balanced mid-range processor that is not the primary source of the low rank. The percentile data makes it clear that any attempt to improve this combo's standing in Greedfall must focus on the GPU, as the CPU's Cinebench R23 multi-core score of 7969 is sufficient for the game's demands.
Settings Recommendations
Given the measured FPS data, the optimal experience for this combo is found at 1920x1080 with Medium settings, which delivers 46.1 FPS. This strikes the best balance between visual quality and playability, as it stays above the 45 FPS threshold while offering a significant upgrade over the Low preset's 60.4 FPS. The High preset at 1080p (45.2 FPS) is nearly identical in performance to Medium (46.1 FPS), with only a 0.9 FPS difference, so users who prefer slightly better textures may opt for High without a meaningful frame rate penalty. However, the Ultra preset at 1080p drops to 26.9 FPS, which is a 42% reduction from Medium and is likely to feel stuttery in combat-heavy scenes.
At higher resolutions, the options are limited. At 2560x1440, the Low preset (38.9 FPS) is the only setting that stays above 35 FPS, while Medium (32.5 FPS) and High (30.3 FPS) are borderline. The Ultra preset at 1440p falls to 19.2 FPS, which is not recommended. For 4K, all settings are below 25 FPS, with Low (23.0 FPS) being the least bad option, but the experience will be rough. The data suggests that users should treat 1080p as the target resolution and use Medium or High settings, depending on preference for visual fidelity over a few frames per second. The 4 GB VRAM capacity is sufficient for 1080p, but the GPU's raw compute power limits the ability to push higher resolutions.
Measured FPS Breakdown
At 1920x1080, the full range of settings was tested, yielding the following average FPS: Low at 60.4, Medium at 46.1, High at 45.2, and Ultra at 26.9. The step from Low to Medium is a 14.3 FPS drop, while the step from Medium to High is only 0.9 FPS, and the step from High to Ultra is a substantial 18.3 FPS decline. This pattern indicates that the Ultra preset introduces disproportionately heavy effects that the GTX 1050 Ti cannot handle, while High is a more efficient use of the GPU's resources.
At 2560x1440, the measured averages are: Low at 38.9, Medium at 32.5, High at 30.3, and Ultra at 19.2. The scaling here is more linear, with each preset step costing between 6.4 and 11.1 FPS. The 1440p results show that the combo can maintain playable frame rates only on Low, with Medium and High hovering in the low-30s range. The Ultra preset suffers a 41% drop from High, mirroring the 1080p behavior.
At 3840x2160, the data shows: Low at 23.0, Medium at 17.3, High at 17.5, and Ultra at 14.0. Interestingly, the Medium and High results are nearly identical (17.3 vs 17.5), suggesting that the GPU is entirely memory-bandwidth or fill-rate limited at this resolution, and the slight differences between presets are within measurement noise. The Low preset offers a 33% improvement over Ultra, but even the best 4K result of 23.0 FPS is far below the 30 FPS minimum for a consistent console-like experience. The GTX 1050 Ti's 112.1 GB/s memory bandwidth is simply inadequate for 4K pixel throughput, as evidenced by the compressed range of 9 FPS across all settings.
Hardware Specifications
Intel Core i5-9400
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-9400 + NVIDIA GeForce GTX 1050 Ti in Greedfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 23.0 |
| 3840x2160 | High | 17.5 |
| 3840x2160 | Medium | 17.3 |
| 3840x2160 | Ultra | 14.0 |
| 2560x1440 | Low | 38.9 |
| 2560x1440 | Medium | 32.5 |
| 2560x1440 | High | 30.3 |
| 2560x1440 | Ultra | 19.2 |
| 1920x1080 | Low | 60.4 |
| 1920x1080 | Medium | 46.1 |
| 1920x1080 | High | 45.2 |
| 1920x1080 | Ultra | 26.9 |
Greedfall with ii5-9400 + Other GPUs
See how Greedfall performs with the same CPU but different graphics cards.
Other Games with ii5-9400 + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.