Greedfall

The AMD Ryzen 7 7800X3D is an 8-core, 16-thread processor based on the Zen 4 architecture, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. Its 96 MB of shared L3 cache is a defining feature for gaming workloads, and the benchmark data shows strong multi-threaded performance: the Cinebench R23 multicore score reaches 29149, while the single-core score is 4115. In the context of Greedfall, an Action RPG that typically relies on a mix of physics, AI, and world simulation, this CPU configuration ensures that frame pacing is not bottlenecked by thread scheduling. The 3DMark 16-thread score of 7980 and the max-thread score of 7967 are nearly identical, indicating that the processor’s scaling plateaus with its full thread count, which is expected for a 16-thread part. The PassMark multithread score of 34293 further corroborates its capability to handle heavy background tasks alongside the game.

Relative to its nearest rivals, the Ryzen 7 7800X3D sits at the top of its immediate performance tier. It holds an average benchmark score of 31580, which places it a marginal 0.1% ahead of the Intel Core i7-12700F (scoring 31543) and 0.3% ahead of the AMD Ryzen 9 5980HX (scoring 31495). The deltaPct values are small, but the 7800X3D’s advantage is consistent across the board, with a 0.6% lead over both the AMD Ryzen 7 8700G and the AMD Ryzen 7 7745HX, which score 31407 and 31402 respectively. This places the CPU in the 87th percentile against all CPUs, meaning it outperforms the vast majority of processors in synthetic workloads. For Greedfall specifically, the measured FPS at 1920x1080 with High settings is 147.1, which is a high enough frame rate that the CPU’s single-thread performance (Geekbench single-core score of 2725) is more than sufficient to feed the GPU. The data suggests that even at lower resolutions where CPU load is more pronounced, the 7800X3D provides ample headroom, as evidenced by the 204.1 FPS at 1920x1080 Low settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 7 7800X3D’s 8 cores and 16 threads are well-suited for Greedfall’s engine, which benefits from parallel processing for rendering and game logic. The boost clock of 5.00 GHz provides the necessary single-thread speed for the game’s main simulation loop, while the 96 MB L3 cache helps reduce latency when accessing frequently used data. In the measured data, the jump from Low to High settings at 1920x1080 shows a decrease from 204.1 FPS to 147.1 FPS, indicating that the CPU is not the limiting factor at these settings; the difference is primarily due to increased GPU workload. The processor’s multithreaded scores, such as the Cinebench R20 multicore result of 12242, demonstrate that it can handle the game’s background threads without impacting frame times. The 3DMark 8-thread score of 6539 suggests that even with half the threads active, the processor maintains high throughput, which is relevant for games that may not utilize all 16 threads efficiently.

The CPU’s performance relative to its rivals is tight but favorable. With a deltaPct of just 0.1% against the Intel Core i7-12700F, the difference is negligible in real-world gaming, but the 7800X3D’s cache advantage likely provides more consistent frame times in complex scenes. The 0.3% lead over the AMD Ryzen 9 5980HX, a mobile part, is more expected, but the 0.6% lead over the Ryzen 7 8700G and the 7745HX shows that the 7800X3D is a solid desktop choice. For Greedfall, the measured FPS at 2560x1440 High settings is 103.7, which is a substantial jump from the 61.2 FPS at 3840x2160 High. This scaling is typical, with the CPU providing enough headroom to maintain playable frame rates even at 4K, where the GPU becomes the dominant bottleneck. The PassMark physics score of 3522 is modest, but it does not appear to hinder the game’s performance, as the average FPS remains high across all tested resolutions.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s. Its boost clock of 1725 MHz and base clock of 1500 MHz are modest for a high-end card, but the 5888 shading units and 184 texture mapping units deliver substantial compute throughput, with an FP32 performance of 20.31 TFLOPS. For Greedfall, which is not a VRAM-heavy title, the 8 GB capacity is sufficient, as indicated by the measured FPS at 3840x2160 Ultra settings dropping to 38.6, which is more likely due to raw compute limits rather than memory constraints. The GPU’s PassMark G3D score of 22214 places it in the 72nd percentile against all GPUs, showing it is a capable mid-to-high-end part, though not a top-tier one.

The RTX 3070’s nearest rivals in the benchmark database include the AMD FirePro S7150, which scores 28409 and is 0.6% higher, and the AMD Radeon RX 6600 XT, which scores 27985 and is 0.9% lower. The NVIDIA GeForce GTX 980 Ti, with a score of 27956, is 1% lower, while the AMD Radeon R9 M295X scores 28541 and is 1.1% higher. These deltas are all within a small margin, indicating that the RTX 3070 is closely matched with these older or lower-tier parts in synthetic benchmarks. However, in Greedfall, the GPU’s performance is more telling: at 2560x1440 Ultra, it achieves 67.4 FPS, which is playable, but at 3840x2160 Ultra, it drops to 38.6 FPS, which is below the 60 FPS threshold for smooth gameplay. The GPU’s DirectX 12 score of 85 in PassMark is low, but the game’s performance suggests that this does not translate to poor real-world results, likely because the game’s engine is optimized for older APIs.

The memory clock of 1750 MHz (14 Gbps effective) and the 256-bit bus are adequate for 1080p and 1440p gaming, as shown by the 147.1 FPS at 1920x1080 High and 103.7 FPS at 2560x1440 High. At 4K, the GPU’s bandwidth becomes a limiting factor, with the 61.2 FPS at High settings being the highest achievable at that resolution. The texture rate of 317.4 GTexel/s and pixel rate of 165.6 GPixel/s are solid, but the GPU’s 220 W TDP and suggested PSU of 550 W indicate it is a power-hungry component, though this does not affect the measured FPS. The RTX 3070’s performance in Greedfall is consistent with its synthetic scores, showing it is best suited for 1440p gaming, where it can maintain high frame rates with most settings enabled.

FAQ

Q: What is the average FPS for this combo at 1920x1080 with High settings?

A: The measured average FPS is 147.1, which is a high frame rate that indicates smooth gameplay.

Q: How does the RTX 3070 compare to its closest rival, the AMD Radeon RX 6600 XT?

A: The RTX 3070 has an average benchmark score of 28238, which is 0.9% higher than the RX 6600 XT’s score of 27985, showing a slight performance advantage.

Q: Is the CPU or GPU the bottleneck at 3840x2160 Ultra settings?

A: At 3840x2160 Ultra, the average FPS is 38.6, which is low, and the GPU’s compute limits are the likely cause, as the CPU’s high scores provide ample headroom.

Q: What is the CPU’s percentile ranking against all CPUs?

A: The Ryzen 7 7800X3D is in the 87th percentile, meaning it outperforms 87% of all CPUs in the database.

Q: What is the difference in FPS between 2560x1440 High and 3840x2160 High?

A: The average FPS at 2560x1440 High is 103.7, while at 3840x2160 High it is 61.2, representing a significant drop due to the increased resolution.

Q: Does the GPU’s 8 GB VRAM cause any issues in Greedfall?

A: The data shows no VRAM-related issues, as the FPS at 3840x2160 High is 61.2, indicating that the game does not exceed the memory capacity.

Settings Recommendations

Based on the measured FPS data, the optimal preset for this combo depends on the target resolution. At 1920x1080, the Ultra preset delivers an average FPS of 97.1, which is above the 60 FPS threshold and provides the best visual quality without sacrificing playability. The High preset at this resolution achieves 147.1 FPS, which is excellent for high-refresh-rate monitors, but Ultra offers a more immersive experience with minimal performance cost. For 2560x1440, the High preset is the recommended choice, as it delivers 103.7 FPS, which is smooth and allows for high detail settings. The Ultra preset at 1440p drops to 67.4 FPS, which is still playable, but the margin is smaller, and High provides a safer frame rate for demanding scenes. At 3840x2160, the High preset is the best option, achieving 61.2 FPS, which is just above the 60 FPS target. The Medium preset at 4K yields 64.9 FPS, which is slightly higher, but the visual quality reduction is not worth the marginal gain. The Ultra preset at 4K falls to 38.6 FPS, which is not recommended for a smooth experience.

The Low preset at 1920x1080 yields 204.1 FPS, but this is unnecessary for most users, as the High preset offers a much better visual experience with a still-high 147.1 FPS. The data suggests that the combo is well-balanced for 1440p gaming, with High settings providing the best compromise between image quality and performance. For users with 4K displays, High settings are the only viable option to maintain 60 FPS, but the 61.2 FPS result is close to the limit, and any future driver updates or game patches could affect this. The Medium preset at 1440p yields 115 FPS, which is higher than High, but the visual difference is noticeable, so High is the better choice for most players.

How This Combo Ranks

The combo of the AMD Ryzen 7 7800X3D and the NVIDIA GeForce RTX 3070 ranks 771 out of 1705 tested combos in Greedfall, placing it in the upper half of the database. This ranking reflects a balanced pairing where neither component is severely mismatched for the game’s requirements. The CPU’s high performance (87th percentile) is slightly offset by the GPU’s mid-tier status (72nd percentile), resulting in a combo that excels at 1440p but struggles at 4K with Ultra settings. The rank of 771 out of 1705 indicates that many combos with more powerful GPUs or CPUs exist, but this specific pairing offers a solid experience for the majority of gaming scenarios.

The data shows that the combo’s performance is more dependent on the GPU than the CPU, as the FPS scales significantly with resolution changes. At 1920x1080, the combo achieves 147.1 FPS at High settings, which is in the top tier of performance, but at 3840x2160, the FPS drops to 61.2, which is still playable but not exceptional. The rank of 771 suggests that while the combo is capable, it is not at the top of the leaderboard, and users seeking higher frame rates at 4K would need to consider a more powerful GPU. The CPU’s 0.1% lead over the Intel Core i7-12700F in synthetic benchmarks does not translate to a significant in-game advantage, but it does ensure consistent performance in CPU-bound scenarios. Overall, this combo is a strong choice for 1440p gaming, with the rank reflecting its position as a mid-to-high-tier performer in the database.