Greedfall

The AMD Ryzen 7 5700X paired with the NVIDIA GeForce RTX 4060 delivers a robust experience in Greedfall, with the data showing a clear narrative: the GPU is the primary driver of performance at higher resolutions, while the CPU holds its own at 1080p. This combination ranks in the 57th percentile of tested configurations for this title, placing it in the upper half of the 1,705 combos evaluated. The measured frame rates across the board indicate that this pairing is well-suited for smooth gameplay at 1440p and remains highly capable at 4K with adjusted settings.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial and tells a clear story about where the bottleneck lies. At High settings, the average frame rate falls from 129.8 FPS at 1920x1080 to 87.2 FPS at 2560x1440, a reduction of roughly 33%. Moving further to 3840x2160, the average drops to 55 FPS, which is a 58% decrease from the 1080p figure. This scaling pattern is typical of a GPU-bound scenario, where the rendering load at higher pixel counts outpaces the CPU's ability to feed the graphics card.

The trend is even more pronounced at Ultra settings. The average frame rate at 1080p is 80.7 FPS, which falls to 55.7 FPS at 1440p and then plummets to 31.7 FPS at 4K. The 4K Ultra result is barely playable, indicating that the RTX 4060's 8 GB of VRAM and 128-bit memory bus are stretched to their limits with maximum visual fidelity. The data implies that the GPU is the limiting component at 4K, as the CPU's 8-core, 16-thread configuration would not typically show such a dramatic performance cliff solely from resolution changes.

Interestingly, the scaling from Low to High settings at each resolution is not linear. At 1080p, the difference between Low (180 FPS) and High (129.8 FPS) is 50.2 FPS, while at 4K, the same settings gap is only 16.5 FPS (71.5 vs 55 FPS). This suggests that at lower resolutions, the CPU has more headroom to push frames, but as resolution increases, the GPU's workload dominates, narrowing the performance delta between settings. The data points to a system that is well-balanced for 1440p gaming, where the CPU and GPU complement each other without one being a severe bottleneck.

CPU Role

The Ryzen 7 5700X is a Zen 3 part with 8 cores and 16 threads, a configuration that proves more than adequate for Greedfall. Its boost clock of 4.60 GHz and base clock of 3.40 GHz are reflected in its benchmark scores, notably a single-thread score of 921 in 3dmark and a multi-thread score of 6,858 in the 16-thread test. The data shows that the CPU's performance is in line with its nearest rivals, such as the Intel Core i9-11900KF, which scores 26,196 in average benchmarks versus the 5700X's 26,214, a negligible delta of 0.1%.

In this game, the CPU's role becomes apparent when examining the 1080p Low preset, which achieves 180 FPS. This high frame rate indicates that the processor can handle the game's logic and draw calls without becoming a limiting factor, even at high refresh rates. The multi-threaded capability is also relevant; with a Cinebench R23 multi-core score of 22,620, the CPU can efficiently manage background tasks and game threads simultaneously. However, the data suggests that beyond 1080p, the CPU's influence wanes, and the GPU's raw throughput dictates the final frame rates. The single-thread performance, while strong with a Geekbench score of 2,148, is not the primary constraint in this title, as the frame rate scaling with resolution follows a GPU-centric pattern.

FAQ

*Q: Can this combination achieve 60 FPS at 4K in Greedfall?*

A: Yes, but only at Medium settings, where the average frame rate is 60.4 FPS. At High settings, the average drops to 55 FPS, and at Ultra, it falls to 31.7 FPS, making 60 FPS unattainable at those higher presets.

Q: What is the best resolution for this pairing to maintain high refresh rates?

A: At 1920x1080, the average frame rates exceed 129 FPS on High settings and reach 180 FPS on Low, making it suitable for high-refresh-rate monitors. At 2560x1440, the High preset still delivers 87.2 FPS, which is adequate for most displays.

Q: How does the RTX 4060's performance compare to its closest rival in synthetic benchmarks?

A: The RTX 4060 has an average benchmark score of 23,181, which is 0.6% lower than the AMD Radeon RX 6600M (23,321) and 0.7% lower than the NVIDIA GeForce GTX 780 Ti (23,338). Conversely, it is 0.7% higher than the Intel Arc B580 (23,021).

Q: Is the Ryzen 7 5700X a bottleneck for the RTX 4060 at 1080p?

A: The data suggests it is not a severe bottleneck. At 1080p Low, the system achieves 180 FPS, and at High, 129.8 FPS, indicating the CPU can feed the GPU adequately at these settings. The CPU's single-thread score of 921 in 3dmark supports its capability.

Q: What is the frame rate difference between Medium and Ultra settings at 1440p?

A: The average frame rate at Medium is 96.8 FPS, while at Ultra, it drops to 55.7 FPS. This represents a 41.1 FPS reduction, showing that Ultra settings impose a significant rendering cost.

Q: Does the GPU's VRAM capacity affect performance at 4K?

A: The RTX 4060 has 8 GB of GDDR6 memory. The data shows a steep drop from Medium (60.4 FPS) to Ultra (31.7 FPS) at 4K, which is consistent with the GPU struggling to manage the high-resolution textures and effects within its memory capacity.

How This Combo Ranks

This specific combination of the Ryzen 7 5700X and RTX 4060 ranks 986th out of 1,705 tested combos in Greedfall. This places it in the upper-middle tier of configurations, meaning it outperforms a majority of systems but is not at the top end. The CPU's percentile of 83 against all CPUs indicates it is a strong processor, while the GPU's percentile of 66 against all GPUs shows it is a mid-range performer. The ranking suggests that while the system is capable, there are many combinations with more powerful GPUs that achieve higher frame rates, particularly at 4K.

Compared to the CPU's nearest rivals, the performance delta is negligible, with the Ryzen 7 5700X sitting within 0.2% of the AMD Ryzen 5 7600X and the AMD Ryzen 7 PRO 6850U. This implies that the choice of CPU within this performance class has minimal impact on the overall ranking. The GPU's position is similar; its nearest rival, the RX 6600M, is just 0.6% faster in synthetic tests. The data reveals that this combo's rank is more heavily influenced by the GPU's limitations at higher resolutions than by the CPU's processing power.

Settings Recommendations

For the best balance of visual quality and performance, the High preset at 2560x1440 is the standout choice. The data shows an average frame rate of 87.2 FPS, which is smooth for most gameplay scenarios. At 1920x1080, the High preset achieves 129.8 FPS, making it ideal for competitive or fast-paced sections. For users prioritizing frame rate over visuals, the Medium preset at 1440p offers 96.8 FPS, a noticeable improvement over High with likely minimal visual degradation.

At 4K, the Medium preset is the only viable option for maintaining playability, yielding 60.4 FPS. The High preset at 55 FPS is borderline, while Ultra at 31.7 FPS is not recommended for a consistent experience. The data indicates that moving from Medium to High at 4K costs only 5.4 FPS, which might be acceptable for some, but the leap to Ultra costs an additional 28.7 FPS, which is too steep. The Low preset at 1440p provides 125.7 FPS, which is excellent for high-refresh displays, but the visual trade-offs may not be worth it for a narrative-driven RPG.

Measured FPS Breakdown

At 1920x1080, the average frame rates are 180 FPS on Low, 139.6 FPS on Medium, 129.8 FPS on High, and 80.7 FPS on Ultra. The progression from Low to Ultra shows a steady decline, with the largest single drop occurring between High and Ultra, a reduction of 49.1 FPS. This suggests that Ultra settings introduce effects that heavily tax the GPU, such as increased shadow quality and draw distances.

At 2560x1440, the averages are 125.7 FPS on Low, 96.8 FPS on Medium, 87.2 FPS on High, and 55.7 FPS on Ultra. The gap between Low and Medium is 28.9 FPS, while the gap between High and Ultra is 31.5 FPS, indicating that the GPU's workload scales consistently with settings. At 3840x2160, the averages are 71.5 FPS on Low, 60.4 FPS on Medium, 55 FPS on High, and 31.7 FPS on Ultra. The performance cliff at Ultra is evident here, with a 23.3 FPS drop from High, reinforcing that this preset is beyond the GPU's comfortable range.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a boost clock of 2460 MHz and a base clock of 1830 MHz. Its 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 272.0 GB/s. The GPU's benchmark scores, such as a Passmark G3D score of 19,545 and a Geekbench OpenCL score of 101,030, place it in the 66th percentile of all GPUs. The data clearly shows that this card is the primary determinant of frame rates in Greedfall, especially at higher resolutions.

The GPU's 3,072 shading units and 48 ROPs handle the game's rendering tasks, but the 8 GB VRAM appears to be a limiting factor at 4K Ultra, where the average frame rate drops to 31.7 FPS. The performance difference between Medium and Ultra at 4K is 28.7 FPS, which is a more significant drop than at lower resolutions. This indicates that the card's memory bandwidth and capacity are strained by the game's highest quality textures. The RTX 4060's TDP of 115 W and 15.11 TFLOPS of FP32 performance suggest it is a power-efficient part, but its role in this pairing is clearly to provide solid 1080p and 1440p performance, with 4K requiring careful settings management.