Greedfall

The AMD Ryzen 5 2600 paired with the AMD Radeon RX 7600 ranks 1149th out of 1705 tested combinations for Greedfall. This places the combo in the 32nd percentile of all tested systems, meaning roughly two-thirds of the configurations tested deliver higher average frame rates. The ranking reflects a pairing where the CPU, released in 2018, is significantly older than the GPU, released in 2023, and the benchmark data shows the processor holding back the graphics card in several scenarios. While not a top-tier configuration, this ranking still positions the combo above the median, indicating it can handle the game at playable settings, though not at the highest quality levels with demanding resolutions.

How This Combo Ranks

The combo's rank of 1149 out of 1705 places it in the lower-middle portion of the performance distribution. This is a meaningful data point because Greedfall, an Action RPG from 2019, tends to scale with both CPU and GPU resources depending on the settings and resolution. The Ryzen 5 2600, with its 6 cores and 12 threads, has a passmark multithread score of 13160 and a single-thread score of 2239, which are modest by current standards. The RX 7600, by contrast, has a passmark g3d score of 16634, placing it in the 63rd percentile of all GPUs. The disparity in relative strength between the two components is a key factor in the overall ranking. The data shows that at 1080p, the CPU becomes a limiting factor, while at 4K, the GPU takes over as the primary bottleneck, and the measured FPS reflects this dynamic.

GPU Role

The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture with a Navi 33 chip, featuring 8 GB of GDDR6 memory on a 128-bit bus. The memory operates at 2250 MHz, delivering 18 Gbps effective speed and 288.0 GB/s of bandwidth. The GPU's boost clock reaches 2655 MHz, with a game clock of 2250 MHz and a base clock of 1720 MHz. These specifications provide a solid foundation for Greedfall, which is not exceptionally demanding by modern standards. The benchmark data shows the GPU's performance scaling across resolutions: at 1080p High settings, the combo achieves 109.6 FPS, while at 4K High, it drops to 43.7 FPS. The GPU has 2048 shading units, 128 TMUs, and 64 ROPs, with a pixel rate of 169.9 GPixel/s and a texture rate of 339.8 GTexel/s. The FP32 performance of 21.75 TFLOPS is respectable for this class of card. Compared to its nearest rival, the RX 7600 XT, the RX 7600 is only 0.6% behind in average benchmark score, indicating they perform nearly identically in synthetic tests. However, the 8 GB VRAM capacity becomes a consideration at higher resolutions, though the measured FPS data shows playable results even at 4K with adjusted settings.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling from 1080p to 4K. At 1080p Low settings, the combo achieves 154.4 FPS, while at 4K Low, it drops to 60.6 FPS, a reduction of approximately 60%. At High settings, the drop is from 109.6 FPS at 1080p to 43.7 FPS at 4K, a 60% decrease. This scaling suggests that the GPU is increasingly becoming the limiting factor as resolution rises. At 1080p, the CPU's limitations are more apparent: the jump from Low to Ultra settings only reduces FPS from 154.4 to 70.7, showing that the CPU can feed the GPU enough frames at lower resolutions. However, at 4K, the GPU's workload becomes dominant, and the difference between Low and Ultra settings is stark: 60.6 FPS versus 29.6 FPS. This indicates that at 4K, the RX 7600 is fully utilized, and the CPU's role diminishes. The data also shows that Medium settings provide a balanced point: 123.4 FPS at 1080p, 84.3 FPS at 1440p, and 52.6 FPS at 4K, which are all playable, though 4K Medium is borderline for smooth gameplay.

FAQ

Q: What is the best resolution for this combo to achieve 60+ FPS consistently?

A: At 1440p, the combo achieves 75.6 FPS on High and 84.3 FPS on Medium, both above 60 FPS. At 4K, only Low settings reach 60.6 FPS, so 1440p is the optimal resolution for a smooth experience across most settings.

Q: How does the CPU affect performance at 1080p compared to 4K?

A: At 1080p, the Ryzen 5 2600's 6 cores and 12 threads with a boost clock of 3.90 GHz become a limiting factor, as shown by the smaller FPS gap between Low (154.4) and Ultra (70.7) settings. At 4K, the GPU becomes the bottleneck, and the CPU's influence diminishes, with only a 31 FPS difference between Low (60.6) and Ultra (29.6).

Q: Is the RX 7600's 8 GB VRAM sufficient for Greedfall at 4K?

A: The data shows playable results at 4K with 43.7 FPS on High settings, indicating the 8 GB VRAM is adequate for this game, though the 128-bit memory bus and 288.0 GB/s bandwidth may limit performance in more demanding scenes.

Q: How does this combo compare to systems with the RX 7600 XT?

A: The RX 7600 is only 0.6% behind the RX 7600 XT in average benchmark score, with scores of 20258 and 20146 respectively. This indicates the two GPUs perform nearly identically, so the CPU pairing is the primary differentiator in real gaming performance.

Q: What settings should be avoided for a 4K experience?

A: Ultra settings at 4K produce only 29.6 FPS, which is below playable thresholds. Even High settings at 4K yield 43.7 FPS, so users seeking 60 FPS at 4K should use Low settings, which deliver 60.6 FPS.

Q: Does the CPU's age limit the combo's potential in Greedfall?

A: Yes, the Ryzen 5 2600's single-thread score of 2239 and multithread score of 13160 are modest, and the data shows that at 1080p, the CPU prevents the GPU from reaching its full potential, as evidenced by the relatively small FPS gains from reducing settings below Medium.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution. For 1080p, Medium settings provide a balanced experience at 123.4 FPS, which is well above the 60 FPS threshold and leaves headroom for demanding scenes. High settings at 1080p still deliver 109.6 FPS, making it viable for users with 144Hz monitors. At 1440p, Medium settings at 84.3 FPS are the sweet spot, as High settings drop to 75.6 FPS and Low settings reach 107.4 FPS, but the visual quality difference justifies Medium. For 4K, the data shows that only Low settings achieve 60.6 FPS, so users prioritizing smoothness should use Low. However, those willing to accept lower frame rates can use Medium at 52.6 FPS or High at 43.7 FPS for better visuals, though this may not be ideal for fast-paced gameplay. Ultra settings are not recommended at any resolution, as even at 1080p they only produce 70.7 FPS, and at 4K they drop to 29.6 FPS, which is below playable standards. The 1440p Medium setting appears to be the best overall compromise, offering a 84.3 FPS average while maintaining good visual fidelity.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen+ architecture, manufactured on a 12 nm process by GlobalFoundries. It has a base clock of 3.40 GHz and a boost clock of 3.90 GHz, with a 65 W TDP. The CPU features 96 KB of L1 cache per core, 512 KB of L2 cache per core, and 16 MB of shared L3 cache. Its memory support includes DDR4 with dual-channel configuration and 46.9 GB/s of bandwidth. The CPU's benchmark scores are modest: a Cinebench R23 multicore score of 11186 and a single-core score of 1579, placing it in the 77th percentile of all CPUs. In Greedfall, the CPU's role is most pronounced at 1080p, where the data shows a 45.7 FPS difference between Low (154.4) and Ultra (70.7) settings. This indicates that at lower resolutions, the CPU's processing power limits the frame rate, as the GPU is not fully stressed. At 4K, the CPU's influence diminishes, as the GPU becomes the bottleneck, and the FPS difference between Low and Ultra is only 31 FPS. The CPU's nearest rival, the Intel Core i5-11600KF, has an average benchmark score of 19740, which is 0.6% higher, while the AMD Ryzen 5 7530U is 0.6% lower. This places the Ryzen 5 2600 in a competitive position for its age, but it clearly lags behind modern CPUs in single-threaded performance, which is critical for games like Greedfall that rely on consistent frame pacing.