Fortnite
This combination provides smooth gameplay with an average of 105 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 45 | 58 | 82 |
| 1440p QHD | 56 | 85 | 110 | 156 |
| 1080p Full HD | 88 | 134 | 173 | 245 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fortnite with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 4060, In-Depth Analysis
The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 4060 delivers a highly playable Fortnite experience across most common configurations. The measured data shows a combination that scales predictably with resolution and settings, with the GPU becoming the primary limiting factor at higher graphical loads. This pairing ranks 1995th out of 3700 tested combos in this game, placing it in the upper-middle tier of the database.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and reveals a system that transitions from CPU-bound at lower resolutions to firmly GPU-bound at the highest ones. At 1080p Low settings, the combo produces 245 FPS average. Moving to 1440p Low, the average drops to 156 FPS, a 36.3% reduction. The climb to 4K Low yields 82 FPS, which is a 47.4% drop from the 1440p figure and a 66.5% drop from the 1080p baseline. This steep decline at Low settings indicates that the CPU can push high frame rates at 1080p, but the GPU's workload scaling with pixel count becomes the dominant factor as resolution increases.
The pattern is consistent across Medium settings, where the average FPS goes from 173 at 1080p to 110 at 1440p (a 36.4% reduction) and then to 58 at 4K (a 47.3% drop from 1440p). High settings show a similar trajectory: 134 FPS at 1080p, 85 FPS at 1440p (36.6% lower), and 45 FPS at 4K (47.1% lower). The consistency of these percentage drops across settings strongly suggests that the scaling is resolution-driven rather than setting-driven, pointing to the GPU as the limiting component once pixel count rises.
Ultra settings exhibit the most dramatic scaling. At 1080p Ultra, the average is 88 FPS. This drops to 56 FPS at 1440p (36.4% lower) and plummets to 30 FPS at 4K (46.4% lower). The 4K Ultra result of 30 FPS is the only configuration in the measured set that falls below the 60 FPS threshold that most players consider baseline playability. The data indicates that the RTX 4060's 8 GB of GDDR6 memory and 128-bit bus, yielding 272.0 GB/s bandwidth, are adequate for 1080p and 1440p but begin to constrain performance at 4K, especially with higher-quality presets.
FAQ
Q: What is the best resolution for competitive play with this combo?
A: The measured data shows 1080p Low delivering 245 FPS average, which is the highest figure across all tested configurations. For players prioritizing frame rate over visual fidelity, this is the optimal choice. The 1440p Low setting at 156 FPS is also viable for competitive play, though it sacrifices some of the headroom found at 1080p.
Q: How does the combo perform at 4K Ultra settings?
A: The measured average is 30 FPS at 4K Ultra, which is the lowest result in the entire dataset. This configuration is not recommended for smooth gameplay, as the frame rate falls well below the 60 FPS target. The GPU's memory bandwidth and 8 GB capacity appear insufficient for this extreme workload.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: At 1080p Low, the 245 FPS average suggests the Ryzen 5 4600G, with its 6 cores and 12 threads boosting to 4.20 GHz, is capable of feeding the RTX 4060 adequately. The relatively small FPS gap between Low and Medium presets at 1080p (245 vs 173) indicates the GPU is starting to become the limiting factor as graphical load increases, but the CPU is not severely constraining performance at this resolution.
Q: What is the performance difference between Medium and High settings at 1440p?
A: At 1440p, Medium settings produce 110 FPS average with a minimum of 93 FPS, while High settings produce 85 FPS average. The difference of 25 FPS represents a 22.7% reduction in performance when moving from Medium to High. The minimum FPS values are not provided for High settings, but the Medium minimum of 93 FPS suggests decent frame pacing.
Q: How does this combo rank compared to other tested configurations?
A: This pairing ranks 1995th out of 3700 tested combos in Fortnite, placing it in the 54th percentile. This indicates that a majority of tested configurations outperform it, but it is not at the bottom of the distribution. The ranking reflects a mid-tier combination that handles most scenarios well but lacks the top-end horsepower for maximum settings at high resolutions.
Q: Does the combo maintain playable frame rates across all measured settings?
A: No. The 4K Ultra setting at 30 FPS and the 4K High setting at 45 FPS are below the 60 FPS threshold. Every other measured configuration exceeds 56 FPS, with the lowest non-4K result being 56 FPS at 1440p Ultra. For consistent 60+ FPS gameplay, players should stick to 1080p or 1440p with Medium or lower settings.
How This Combo Ranks
The combo ranks 1995th out of 3700 tested combos in Fortnite, which places it in the upper-middle portion of the database. This rank of 1995 means that approximately 54% of tested combinations deliver higher average performance in this game. The position reflects a balanced pairing where neither component is severely mismatched, but neither is top-tier either.
The CPU's percentileVsAllCpus of 71 indicates that the Ryzen 5 4600G outperforms 71% of all tested CPUs in general benchmarks. However, its nearest rivals show a tightly clustered group: the AMD Ryzen 3 PRO 5355GE has an average score 0.1% higher, the AMD Ryzen 3 8300GE is 0.6% lower, the Intel Core 7 150U is 0.6% higher, and the Intel Core i3-14100T is 0.8% lower. This tight grouping suggests that the CPU's raw compute power is competitive with similar modern processors.
The GPU's percentileVsAllGpus of 61 is lower than the CPU's percentile, indicating that the RTX 4060 is less dominant relative to its peers. Its nearest rivals show a similar pattern: the AMD Radeon HD 7790 is 0.2% higher, the AMD Radeon 780M is 0.3% lower, the AMD Radeon Pro 560 is 0.5% higher, and the AMD Radeon Pro 460 is 0.7% higher. The small deltas suggest that the GPU is positioned in a crowded performance tier where minor architectural differences produce minimal score variations.
The combination of a 71st-percentile CPU with a 61st-percentile GPU results in a 54th-percentile gaming rank for this specific title. This discrepancy indicates that Fortnite's engine, with its heavy draw-call and physics loads, may be more sensitive to the CPU's multi-threaded performance than to raw GPU compute. The CPU's 3dmark_16_threads score of 4863 and cinebench_r23_multicore score of 13593 demonstrate solid multi-core capability that likely helps maintain frame rates in busy battle royale scenarios.
Measured FPS Breakdown
At 1920x1080, the resolution most commonly used by competitive players, the combo delivers consistently high frame rates. Low settings produce 245 FPS average, which is the highest measured value in the entire dataset. Medium settings yield 173 FPS average with a minimum of 147 FPS and a maximum of 198 FPS, providing a smooth experience. High settings reduce the average to 134 FPS, while Ultra settings drop to 88 FPS. All 1080p configurations exceed the 60 FPS threshold comfortably.
Moving to 2560x1440, the performance remains strong but shows the GPU beginning to strain. Low settings deliver 156 FPS average, which is still excellent for high-refresh-rate displays. Medium settings produce 110 FPS average with a minimum of 93 FPS and a maximum of 126 FPS, maintaining good playability. High settings drop to 85 FPS average, and Ultra settings fall to 56 FPS. The Ultra result at 1440p is the only sub-60 FPS measurement outside of 4K.
At 3840x2160, the limitations of the RTX 4060 become apparent. Low settings produce 82 FPS average, which is playable but notably lower than the 1080p Low result. Medium settings yield 58 FPS average with a minimum of 49 FPS and a maximum of 67 FPS, dipping below the 60 FPS target. High settings drop to 45 FPS average, and Ultra settings fall to 30 FPS. None of the 4K configurations achieve a consistent 60+ FPS experience, with only Low settings coming close.
The minimum FPS data is only provided for Medium settings at each resolution: 147 FPS at 1080p, 93 FPS at 1440p, and 49 FPS at 4K. These values suggest that the Medium preset maintains relatively stable frame pacing, with the minimum staying within 15-17% of the average. This consistency is notable for a game with the dynamic environmental destruction and player count of Fortnite.
CPU Role
The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, manufactured on a 7 nm process by TSMC. It has a base clock of 3.70 GHz and a boost clock of 4.20 GHz, with a TDP of 65 W. The CPU's cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and 8 MB of shared L3 cache. Memory support is dual-channel DDR4 with a bandwidth of 51.2 GB/s.
In Fortnite, the CPU's role is significant, particularly at lower resolutions where frame rates are high. The 245 FPS result at 1080p Low suggests that the CPU is capable of feeding the GPU with enough draw calls to maintain very high frame rates. The 3dmark_16_threads score of 4863 and the 3dmark_8_threads score of 4138 indicate that the processor handles multi-threaded workloads well, which is relevant for a game that must track multiple players, buildings, and projectiles simultaneously.
The Cinebench R23 multicore score of 13593 and single-core score of 1919 show a balanced performance profile. The single-core performance, while not class-leading, is sufficient for the game's main thread, which typically handles input, physics, and game logic. The PassMark multithread score of 15992 and single-thread score of 2653 corroborate this assessment. The CPU's percentileVsAllCpus of 71 places it above most processors in the database, and its nearest rivals — all within 0.8% of its average benchmark score — confirm that it sits in a competitive performance tier.
The 7 nm process and 65 W TDP mean the CPU runs efficiently, which is relevant for sustained gaming sessions. The integrated Radeon Vega 7 graphics are present but not used in this configuration, as the discrete RTX 4060 handles all rendering duties. The PCIe Gen 3 interface with 20 lanes is sufficient for the RTX 4060, which uses a PCIe 4.0 x8 bus connection, though the Gen 3 link may slightly constrain data transfer in bandwidth-intensive scenarios.
Settings Recommendations
For players targeting maximum frame rates, the 1080p Low preset at 245 FPS is the clear choice. This configuration provides the highest possible performance headroom, which is critical for competitive play where every millisecond matters. The 1440p Low setting at 156 FPS is a strong alternative for those with 1440p monitors who still want high refresh rates.
For a balanced visual quality and performance compromise, the Medium preset at 1080p offers 173 FPS average with a minimum of 147 FPS. This is the best "safe" choice for maintaining smooth gameplay during intense firefights, as the minimum FPS stays well above the 144 Hz refresh rate that many competitive monitors offer. At 1440p, the Medium preset at 110 FPS with a 93 FPS minimum is the most playable option above Low settings.
The High preset is viable for players prioritizing visual fidelity over raw performance, with 134 FPS at 1080p and 85 FPS at 1440p. However, the Ultra preset at 1080p (88 FPS) and 1440p (56 FPS) shows diminishing returns, with the 1440p Ultra result falling below the 60 FPS threshold. Given the measured data, Ultra settings are not recommended for this combo, as the visual improvements do not justify the significant frame rate cost.
At 4K, only the Low preset at 82 FPS is recommended for playable performance. Medium at 58 FPS is borderline, with the 49 FPS minimum potentially causing noticeable stutter in busy scenes. Players with 4K displays should either use Low settings or consider lowering the resolution to 1440p for a better experienceheb.
GPU Role
The NVIDIA GeForce RTX 4060 is based on the Ada Lovelace architecture, manufactured on a 5 nm process by TSMC. It features 3072 shading units, 96 TMUs, 48 ROPs, 24 RT cores, and 96 tensor cores. The GPU has a base clock of 1830 MHz and a boost clock of 2460 MHz, with 8 GB of GDDR6 memory on a 128-bit bus providing 272.0 GB/s bandwidth. The TDP is 115 W, and the card requires a 300 W PSU.
In Fortnite, the GPU's role becomes increasingly dominant as resolution and settings increase. The measured FPS drops from 245 at 1080p Low to 82 at 4K Low represent a 66.5% reduction, which is directly attributable to the GPU's rendering workload scaling with pixel count. The 8 GB VRAM capacity is sufficient for 1080p and 1440p at all settings, but at 4K with Ultra settings, the combination of high-resolution textures and effects appears to exceed what the memory subsystem can efficiently handle.
The GPU's PassMark G3D score of 19545 and Geekbench OpenCL score of 95057 indicate solid compute performance for a mid-range card. The FP32 throughput of 15.11 TFLOPS is adequate for the game's shader complexity at lower resolutions but shows limitations at 4K Ultra. The memory bandwidth of 272.0 GB/s, while not exceptional, is sufficient for the measured performance at 1080p and 1440p.
The GPU's percentileVsAllGpus of 61 places it above the median of all tested GPUs, but its nearest rivals show a tight cluster within 0.7% of its average benchmark score. This indicates that the RTX 4060 is positioned in a competitive segment where small architectural differences produce minimal performance variation. The 24 RT cores and 96 tensor cores provide hardware support for ray tracing and DLSS, though the measured FPS data does not include results with these features enabled.
The 5 nm process and 115 W TDP keep the GPU running cool and efficiently, which is beneficial for sustained gaming sessions. The PCIe 4.0 x8 bus interface, while narrower than the x16 used by higher-end cards, does not appear to bottleneck performance in this game based on the measured results. The 128-bit memory bus is the most likely limiting factor at 4K, as evidenced by the steep performance drop at that resolution.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 4060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 4060 in Fortnite
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 82.0 |
| 3840x2160 | Medium | 58.0 |
| 3840x2160 | High | 45.0 |
| 3840x2160 | Ultra | 30.0 |
| 2560x1440 | Low | 156.0 |
| 2560x1440 | Medium | 110.0 |
| 2560x1440 | High | 85.0 |
| 2560x1440 | Ultra | 56.0 |
| 1920x1080 | Low | 245.0 |
| 1920x1080 | Medium | 173.0 |
| 1920x1080 | High | 134.0 |
| 1920x1080 | Ultra | 88.0 |
Fortnite with Ryzen 5 4600G + Other GPUs
See how Fortnite performs with the same CPU but different graphics cards.
Fortnite with RTX 4060 + Other CPUs
See how Fortnite performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 4060
Explore FPS benchmarks for other games using this same hardware combination.