Fivem

Fivem

AVERAGE FPS
95
good

This combination provides smooth gameplay with an average of 95 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 43 57 74
1440p QHD 61 78 99 127
1080p Full HD 94 121 155 197

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 74
3840x2160 Medium 57
3840x2160 High 43
3840x2160 Ultra 36
2560x1440 Low 127
2560x1440 Medium 99
2560x1440 High 78
2560x1440 Ultra 61
1920x1080 Low 197
1920x1080 Medium 155
1920x1080 High 121
1920x1080 Ultra 94

Fivem with Intel Core i5-12400F + AMD Radeon RX 9060 XT 8 GB, In-Depth Analysis

The Intel Core i5-12400F is a 6-core, 12-thread processor based on the Alder Lake architecture, with a base clock of 2.50 GHz and a boost clock of 4.40 GHz. Its 18 MB of shared L3 cache and dual-channel memory support position it as a solid mid-range desktop part, and its benchmark percentiles confirm this: it sits in the 77th percentile against all CPUs. In synthetic tests, its multi-threaded performance is notably stronger than its single-thread showing; for instance, it scores 16,518 in Cinebench R23 multi-core versus 2,332 in single-core. This scaling pattern suggests that while the CPU is capable of handling heavily threaded workloads, its per-core strength is more modest. In FiveM, a multiplayer modification that often relies on a handful of primary threads for game logic and world simulation, this balance is relevant. The data shows that at 1080p with Low settings, the combo achieves 196.5 FPS, which is the highest recorded frame rate across all tested configurations. This high ceiling indicates that the CPU is not a hard bottleneck when graphical load is minimized; the processor has enough headroom to push frame rates well past typical 144 Hz displays. However, the gap between Low and Ultra at 1080p is substantial — 196.5 FPS down to 93.7 FPS — which implies that the CPU’s contribution becomes less dominant as the GPU takes on more work. The nearest rival in average benchmark score is the Intel Core i7-8700K, with a delta of only 0.1%, meaning the 12400F and that older chip are effectively tied in general compute. This is a useful reference point: the 12400F offers modern efficiency but not a dramatic leap in raw throughput over a well-known prior-generation part. For FiveM specifically, the CPU’s 12 threads are ample for the game’s typical server-side and client-side processing, but the modest single-thread score (909 in 3DMark single-thread) suggests that very high frame rates in CPU-limited scenarios will depend more on the game’s optimization than on the processor’s peak capability.

GPU Role

The AMD Radeon RX 9060 XT 8 GB is built on the RDNA 4.0 architecture with the Navi 44 chip, manufactured on a 4 nm process. It carries 8 GB of GDDR6 memory on a 128-bit bus, yielding a bandwidth of 322.3 GB/s, which is a key constraint at higher resolutions. The GPU’s boost clock is 3130 MHz, with a game clock of 2530 MHz, and it offers 2048 shading units and 64 ROPs. Its FP32 throughput is 25.64 TFLOPS, which is respectable for a mid-range card, but the memory configuration — both capacity and bus width — is the limiting factor in demanding scenarios. In FiveM, the measured FPS data shows a clear pattern: at 1080p, the GPU can deliver 120.6 FPS on High settings, but dropping to Low raises that to 196.5 FPS, indicating that the GPU is not the primary constraint at this resolution. The situation changes at 4K. At 3840x2160 with Ultra settings, the average FPS falls to 35.8, and even on High it only reaches 43.4 FPS. This steep decline is consistent with the GPU’s 8 GB VRAM and 128-bit memory interface struggling to feed the massive pixel count. The difference between Low and Ultra at 4K is also telling: 73.9 FPS versus 35.8 FPS, a gap of over 50%. This suggests that the GPU’s compute units are capable, but the memory bandwidth and capacity become bottlenecks when texture and shading demands spike. The GPU’s percentile ranking against all GPUs is 50th, placing it squarely in the middle of the pack, and its average benchmark score is listed as zero, which indicates no separate synthetic score is available for direct comparison. For FiveM, which is often more CPU-bound in multiplayer scenarios, the GPU’s role becomes more pronounced at higher resolutions and quality presets. The data shows that at 1440p, the card handles High settings at 78.2 FPS, which is playable, but Ultra drops to 61.4 FPS. The 8 GB VRAM is sufficient for 1080p and most 1440p scenarios, but at 4K, the card’s limitations are exposed, particularly with higher presets that increase memory pressure.

Settings Recommendations

Based on the measured FPS rows, the optimal balance between visual quality and performance is found at 1440p with High settings. At this configuration, the combo delivers 78.2 FPS, which is above the threshold for smooth gameplay on most monitors, while still offering a significant visual upgrade over Low settings. The jump from Low to High at 1440p is from 126.6 FPS down to 78.2 FPS, a reduction of roughly 38%, but the visual fidelity gain is substantial. Pushing to Ultra at 1440p drops the frame rate to 61.4 FPS, which is still playable but begins to approach the lower end of acceptable for fast-paced multiplayer. At 1080p, the picture is different. High settings yield 120.6 FPS, which is excellent, and even Ultra manages 93.7 FPS, making 1080p Ultra a viable option for players who prioritize visual detail over raw frame rates. However, the data suggests that 1080p High is the sweet spot for competitive play, offering a high refresh rate experience without the performance hit of Ultra. The 4K results are less encouraging. Even at Low settings, the card only achieves 73.9 FPS, and at High it drops to 43.4 FPS, which is below the standard for smooth gameplay. Therefore, 4K is not recommended for this combo, as the GPU lacks the memory bandwidth and capacity to maintain playable frame rates at higher presets. The best experience per the measured rows is clearly 1440p High, which provides a frame rate that is 78% higher than the 4K High result, while still offering a rich visual presentation. For users with 1080p displays, High settings are the recommended default, as they provide a 29% improvement over Ultra in average FPS (120.6 versus 93.7) with only a modest reduction in visual quality. Medium settings at 1080p (154.7 FPS) are a good fallback for those seeking even higher refresh rates, but the visual trade-off is noticeable.

How This Combo Ranks

The Intel Core i5-12400F paired with the AMD Radeon RX 9060 XT 8 GB ranks 950th out of 1,792 tested combos in FiveM, placing it in the 53rd percentile of all configurations. This is a mid-pack result, which aligns with the individual component profiles: the CPU is in the 77th percentile for all processors, while the GPU is in the 50th percentile for all GPUs. The combination of a strong CPU and an average GPU yields a system that is better suited to CPU-bound scenarios, which is typical for FiveM’s multiplayer environments. When compared to other combos, this ranking indicates that there are many configurations that outperform it, but also a substantial number that fall behind. The rank of 950 suggests that while the combo is competent, it is not a top-tier performer for this specific game. The GPU’s 8 GB VRAM and 128-bit memory bus are likely the primary factors holding the combo back in more demanding settings, as the CPU has sufficient headroom to support higher frame rates. The data shows that at 1080p Low, the combo achieves 196.5 FPS, which is a strong result, but at 4K Ultra, it falls to 35.8 FPS, a dramatic drop that underscores the GPU’s limitations. The combo’s rank of 950 out of 1,792 means that roughly 47% of tested configurations are faster, which is a meaningful distinction for users who prioritize performance in FiveM. The nearest CPU rivals, such as the Intel Core i7-8700K, have nearly identical average benchmark scores (delta of 0.1%), but the overall combo ranking depends on the GPU pairing. This suggests that upgrading the GPU would likely yield a more significant improvement in FiveM performance than upgrading the CPU, given that the CPU is already a strong performer in its class.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals a clear story about which component is the limiting factor at each resolution. At 1080p, the combo shows strong performance across all settings, with Low hitting 196.5 FPS and High at 120.6 FPS. The drop from 1080p to 1440p is moderate: High settings fall from 120.6 FPS to 78.2 FPS, a reduction of 35%. This is a significant decline, but it is expected as the pixel count increases by 78% (from 2.07 million to 3.69 million pixels). The fact that the frame rate drops by more than the pixel count increase suggests that the GPU is beginning to become a constraint at 1440p, but the CPU is still contributing meaningfully. Moving from 1440p to 4K, the decline is steeper. At High settings, the frame rate drops from 78.2 FPS to 43.4 FPS, a 45% reduction, while the pixel count increases by 125% (from 3.69 million to 8.29 million pixels). This disproportionate drop indicates that the GPU is now the dominant limiting factor. The 8 GB VRAM and 322.3 GB/s bandwidth are insufficient to handle the 4K workload efficiently, especially at higher presets. The scaling pattern is consistent across settings: at Low, the drop from 1080p to 4K is from 196.5 FPS to 73.9 FPS, a 62% reduction, while at Ultra, it is from 93.7 FPS to 35.8 FPS, a 62% reduction as well. This consistency suggests that the GPU’s memory subsystem is the bottleneck regardless of quality preset, as the relative performance loss is similar. The data points to the GPU as the limiting component at 4K, while the CPU remains capable of driving higher frame rates if the GPU could keep up. At 1080p, the CPU is more of a factor, as evidenced by the fact that the frame rate at Low (196.5 FPS) is close to what the CPU can theoretically deliver, given its single-thread score of 909 in 3DMark. The 1440p results represent a balanced point where both components are contributing, but the trend is clear: for this combo, 1080p and 1440p are the practical resolutions, with 4K being feasible only at Low settings, and even then, the 73.9 FPS result is below the 1440p High performance.

Hardware Specifications

Intel Core i5-12400F

Cores / Threads 6 / 12
Base Clock 2500 MHz
Boost Clock 4400 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

AMD Radeon RX 9060 XT 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 3130 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-12400F + AMD Radeon RX 9060 XT 8 GB in Fivem

Resolution Settings Avg FPS
3840x2160 Low 73.9
3840x2160 Medium 56.8
3840x2160 High 43.4
3840x2160 Ultra 35.8
2560x1440 Low 126.6
2560x1440 Medium 99.1
2560x1440 High 78.2
2560x1440 Ultra 61.4
1920x1080 Low 196.5
1920x1080 Medium 154.7
1920x1080 High 120.6
1920x1080 Ultra 93.7

Fivem with ii5-12400F + Other GPUs

See how Fivem performs with the same CPU but different graphics cards.

Fivem with RX 9060 XT 8 GB + Other CPUs

See how Fivem performs with the same GPU but different processors.

Other Games with ii5-12400F + RX 9060 XT 8 GB

Explore FPS benchmarks for other games using this same hardware combination.