Fivem

The AMD Ryzen 9 5900X paired with the NVIDIA GeForce RTX 3060 Ti presents a dataset for Fivem that reveals a clear performance hierarchy across resolutions and presets. Measured results show the combination's behavior shifting from a CPU-limited state at 1080p to a decisively GPU-bound state at 4K, with the RTX 3060 Ti's 8 GB frame buffer and the 5900X's 12-core architecture playing distinct roles.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 produces a steep performance curve that becomes more pronounced as settings increase. At Low settings, the average frame rate drops from 159.5 FPS at 1080p to 106.0 FPS at 1440p, a reduction of 33.5%, and then to 56.3 FPS at 4K, representing a 47% further decline from the 1440p result. This scaling pattern indicates that at Low settings, the system maintains high frame rates but the GPU work per frame grows substantially with pixel count.

The Medium preset shows a similar trajectory: 125.7 FPS at 1080p, 85.1 FPS at 1440p, and 48.4 FPS at 4K. The percentage deltas between successive resolutions are 32.3% and 43.1%, respectively, showing that the 4K penalty intensifies as settings rise. High settings follow the same trend with 102.9 FPS, 64.1 FPS, and 35.8 FPS across the three resolutions, while Ultra delivers 79.2 FPS, 51.1 FPS, and 31.0 FPS.

The data suggests that at 1080p, particularly at Low and Medium settings, the CPU is the limiting component. The 159.5 FPS Low result and 125.7 FPS Medium result are high enough that the GPU is not saturated, allowing the Ryzen 9 5900X's single-thread performance to drive the frame rate. At 4K, however, the GPU becomes the bottleneck, with the gap between Low (56.3 FPS) and Ultra (31.0 FPS) narrowing to a 45% spread, compared to a 50% spread at 1080p. The scaling from 1440p to 4K is particularly steep at High and Ultra settings, where the frame rate roughly halves, indicating that the RTX 3060 Ti's rendering capabilities are being exhausted.

GPU Role

The NVIDIA GeForce RTX 3060 Ti, built on the Ampere architecture with a GA104 chip, brings 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. The memory clock runs at 1750 MHz with 14 Gbps effective speed, while the GPU core operates at a base of 1410 MHz and a boost of 1665 MHz. These specifications align with the measured 4K results: the 8 GB frame buffer is sufficient for Fivem at this resolution, as evidenced by the playable 35.8 FPS average at High settings, but the GPU's compute throughput becomes the limiting factor.

The GPU's 4864 shading units and 152 texture mapping units deliver a texture rate of 253.1 GTexel/s and a pixel rate of 133.2 GPixel/s. The FP32 performance of 16.20 TFLOPS provides the raw compute for the rendering workload, but the data shows that at 4K Ultra, the 31.0 FPS result represents the practical ceiling for this card in Fivem. The GPU's 80 raster output units (ROPs) are likely the constraint at high pixel counts, as the fill rate demands increase linearly with resolution.

Comparing to its nearest rivals, the RTX 3060 Ti's average benchmark score of 25120 places it 0.2% behind the AMD Radeon RX 6700M (25180) and 0.5% behind the AMD Radeon RX 6600 (25235). This puts the GPU at the 69th percentile among all tested GPUs, indicating that while it is not a top-tier part, it sits comfortably in the upper-midrange. The 4K performance data reinforces this positioning: the card can handle Fivem at 4K with reduced settings, but users seeking 60 FPS at 4K would need to drop to Low settings, where the 56.3 FPS result is close to but does not reach that target.

CPU Role

The AMD Ryzen 9 5900X, a 12-core, 24-thread processor based on the Zen 3 architecture (codenamed Vermeer), operates with a base clock of 3.70 GHz and a boost clock of 4.80 GHz. Its 64 MB of L3 cache and 7 nm process node contribute to strong single-thread performance, which is critical for Fivem's multiplayer workloads that often rely on a few primary threads. The CPU's percentile rank of 90 among all CPUs, with an average benchmark score of 39453, underscores its high-end positioning.

The benchmark data for the 5900X shows a 3DMark single-thread score of 941 and a 2-thread score of 1852, while the 16-thread test yields 9075 and the max-thread test reaches 10075. In Cinebench R23, the multicore score of 33150 and singlecore score of 4680 further illustrate the processor's capability. The Geekbench results of 2202 singlecore and 11877 multicore align with the CPU's role in Fivem: the single-thread performance drives the minimum frame rates, while the multicore potential is not fully utilized by this game.

The measured FPS data supports this analysis. At 1080p Low, the 159.5 FPS result is likely near the CPU's limit for this game, as the GPU can render frames faster than the CPU can submit them. The 5900X's boost clock of 4.80 GHz on a single core provides the necessary headroom for Fivem's physics and network code. However, the CPU's 12 cores are underutilized; the game's thread count does not scale to fill all 24 threads, so the multicore advantage is not fully expressed in the frame rate. Compared to its nearest rivals, the 5900X scores 0.2% above the AMD EPYC 4245P (39383) and 0.9% above the Intel Core i7-13700F (39095), while sitting 0.7% below the AMD Ryzen 7 PRO 8845HS and 1% below the Intel Core i7-13700 (39857). This places the CPU in a tight competitive cluster where the performance differences are minimal.

How This Combo Ranks

This CPU-GPU combination ranks 1210 out of 1792 tested combos for Fivem, placing it in the 32nd percentile of all configurations. This rank reflects the balance between the top-tier CPU and the mid-to-upper-range GPU; the 5900X's strong single-thread performance boosts the combo above what the GPU alone would achieve, but the RTX 3060 Ti's 69th percentile GPU score holds the overall ranking back.

The rank is driven by the interplay between the two components. At 1080p, the combo's 102.9 FPS High and 79.2 FPS Ultra results are competitive, but the 4K Ultra result of 31.0 FPS drags the overall standing down relative to combos with more powerful GPUs. The data shows that the combo is well-suited for 1080p and 1440p gaming, where it delivers 64.1 FPS at 1440p High and 51.1 FPS at 1440p Ultra, but the 4K experience is limited to Low or Medium settings for acceptable frame rates.

The 1210 rank also reflects the GPU's position relative to its peers. Since the RTX 3060 Ti's nearest rivals (RX 6700M, RX 6600, RX 890M, RX 580 2048SP) all have average scores within 0.7% of each other, the GPU's performance is tightly clustered, meaning the CPU choice has a disproportionate impact on the final rank. The 5900X's 90th percentile CPU score pushes the combo higher than it would be with a weaker processor, but the GPU's 69th percentile limits the ceiling.

Settings Recommendations

Based on the measured frame rates, the optimal settings depend on the target resolution and desired frame rate. At 1920x1080, the High preset delivers 102.9 FPS, which is well above the 60 FPS threshold for smooth gameplay, while Ultra drops to 79.2 FPS, still playable but with a 23% performance penalty. For competitive play, the Low preset's 159.5 FPS provides maximum responsiveness, but the Medium preset's 125.7 FPS offers a better balance of visual quality and frame rate.

At 2560x1440, the High preset's 64.1 FPS is the recommended choice for a smooth experience, as it exceeds 60 FPS while maintaining reasonable visual fidelity. The Ultra preset's 51.1 FPS is acceptable for slower-paced gameplay but may feel less responsive in fast action. The Medium preset's 85.1 FPS is the sweet spot for players who prioritize frame rate over visual quality, as it offers a 33% improvement over High.

At 3840x2160, the data shows that only the Low preset (56.3 FPS) approaches playable frame rates, with Medium (48.4 FPS) and High (35.8 FPS) falling below 60 FPS. For 4K users, the Low preset is the only viable option for consistent gameplay, while the Ultra preset's 31.0 FPS is only suitable for cinematic or screenshot purposes. The steep drop from 1440p to 4K at all settings indicates that this combo is not designed for 4K gaming in Fivem, and users should target 1440p or 1080p for the best experience.

The measured data suggests that the High preset at 1080p (102.9 FPS) and the Medium preset at 1440p (85.1 FPS) offer the best balance of visual quality and performance for this combo. These settings leverage the RTX 3060 Ti's strengths without overwhelming its 8 GB frame buffer or compute capabilities, while the Ryzen 9 5900X's single-thread performance ensures the CPU does not become a bottleneck at these resolutions.