Fivem

Fivem with the AMD Ryzen 7 9800X3D and NVIDIA GeForce GTX 1070 produces a performance profile that is heavily dictated by the graphics card. The measured frame rates across resolutions and settings reveal a system where the GPU reaches its limits early, while the CPU’s substantial headroom remains largely untapped. The data indicates a playable experience at lower resolutions, but 4K demands significant compromises.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings, pointing directly at the GPU as the primary bottleneck. At Low settings, the average FPS falls from 131 at 1920x1080 to 86 at 2560x1440, a reduction of 34%. Moving to 3840x2160, the average drops further to 48, which is 63% below the 1080p figure. This scaling pattern is characteristic of a GPU-bound scenario, where the pixel throughput requirement outpaces the GTX 1070's capabilities.

The trend is similar at Medium settings, where the average FPS goes from 103 at 1080p to 68 at 1440p, then to 38 at 4K. The 4K result is 63% lower than the 1080p result, mirroring the Low setting's relative decline. High settings show the same pattern: 82 FPS at 1080p, 54 at 1440p, and 30 at 4K. The proportional drops are nearly identical across these presets, reinforcing that resolution, not the graphical preset, is the dominant factor limiting performance.

The Ultra preset exhibits the most extreme scaling, with an average of 64 FPS at 1080p dropping to 42 at 1440p and then to 23 at 4K. The 4K figure is 64% lower than the 1080p figure. This consistent 60-64% performance loss from 1080p to 4K across all settings confirms that the GTX 1070's memory bandwidth and pixel fill rate are the limiting components, not the CPU. The Ryzen 7 9800X3D's strong single-thread performance, as indicated by its PassMark single-thread score of 4430, is not the constraint here.

How This Combo Ranks

In the comprehensive database of tested CPU and GPU combinations for Fivem, this pairing sits at rank 3063 out of 3707 combos. This places it in the lower 17% of all tested configurations, a ranking that reflects the age and tier of the GTX 1070 rather than the capabilities of the Ryzen 7 9800X3D. The data shows a significant mismatch: the CPU is a top-tier part, while the GPU is a mid-range product from a previous generation.

The CPU’s percentile ranking of 87 versus all CPUs indicates it is in the top 13% of processors tested. In contrast, the GPU's percentile of 47 places it almost exactly in the middle of all GPUs tested. This disparity is the core story of the combo's rank. The high rank number (3063) signifies poor overall performance in the game, but the components are not equally responsible. The GTX 1070's average benchmark score of 9780 is nearly identical to its nearest rivals, such as the AMD FirePro W5000 which scores 9803, showing it is performing as expected for its class.

The combination's rank is dragged down by the GPU. For context, the CPU's nearest rivals include the AMD Ryzen 7 PRO 8840HS with a delta of 0.4%, showing the 9800X3D's performance is competitive with other high-end chips. However, this CPU strength cannot compensate for the GPU's limitations in a graphics-heavy game like Fivem. The data suggests that pairing this CPU with a more powerful GPU would yield a dramatically better combo rank.

GPU Role

The NVIDIA GeForce GTX 1070 is the definitive performance limiter in this configuration. Its specifications, including 8 GB of GDDR5 memory on a 256-bit bus with 256.3 GB/s bandwidth, are simply insufficient for high frame rates at higher resolutions in Fivem. The GPU's base clock of 1506 MHz and boost clock of 1683 MHz are fixed, and the data shows they cannot be leveraged to maintain playable frame rates at 4K.

The GPU’s performance is consistent with its benchmark standing. Its PassMark G3D score of 13498 and average benchmark score of 9780 place it in the 47th percentile of all GPUs. Its nearest rival, the AMD FirePro W5000, has an average score of 9803, a delta of -0.2%, indicating the GTX 1070 is performing within the expected range for its hardware. The 6.463 TFLOPS of FP32 compute power is a measure of its theoretical peak, but the measured FPS shows it cannot sustain high output in this specific game.

The 8 GB VRAM capacity is not shown to be a specific point of failure in the measured data, but the overall performance drop at 4K suggests that memory bandwidth is a critical constraint. The GTX 1070's process node of 16 nm is also a factor, as it is less power-efficient and has a lower transistor density (22.9M / mm²) compared to modern GPUs? The data shows that at all settings, the 4K average FPS is below 48, which indicates the GPU is the component that dictates the experience.

Settings Recommendations

Based on the measured FPS, the optimal experience depends heavily on the target resolution. For 1920x1080, the High preset is the clear recommendation. It delivers an average of 82 FPS, which is a smooth, playable experience. The jump to Ultra only increases visual fidelity but drops the average to 64 FPS, which is still playable but a noticeable step down. The Low preset achieves 131 FPS, but the visual quality loss is likely too significant for most users.

At 2560x1440, the Medium preset is the best balance. It provides an average of 68 FPS, which is above the 60 FPS threshold for smooth gameplay. The High preset at 54 FPS is playable but may be less fluid for some, while the Low preset at 86 FPS is fast but comes with a significant visual penalty. The Ultra preset at 42 FPS is not recommended for a consistent experience.

For 3840x2160, the data shows that only the Low preset is viable. It achieves an average of 48 FPS, which is the only 4K setting above 30 FPS. The Medium preset at 38 FPS is borderline, and the High preset at 30 FPS is at the minimum for playability. The Ultra preset at 23 FPS is not recommended. In summary, the measured data suggests using High at 1080p, Medium at 1440p, and Low at 4K for the best balance of visual quality and frame rate.

FAQ

Q: What is the best resolution for this combo?

A: The data indicates 1920x1080 is the best resolution. At High settings, it achieves an average of 82 FPS, which is the highest quality preset with a frame rate above 60. Higher resolutions require significant settings reductions to maintain playable frame rates.

Q: Can this system handle 4K gaming in Fivem?

A: Yes, but with significant limitations. The measured data shows that at 3840x2160, the average FPS is 48 on Low settings and 38 on Medium. Higher settings result in averages below 30 FPS, which is generally not considered playable.

Q: Is the CPU or GPU the bottleneck in this configuration?

A: The GPU is the bottleneck. The frame rate drops proportionally with resolution increases, which is a classic sign of GPU limitation. The CPU's high single-thread score of 4430 suggests it has ample headroom, but the GTX 1070 cannot keep up with the rendering demands.

Q: How does this combo rank compared to others?

A: This combo ranks 3063 out of 3707 tested combinations. This places it in the lower percentile, primarily due to the GPU's mid-range performance. The CPU is a top-tier part, but it cannot overcome the GPU's limitations in this game.

Q: What is the difference between the Low and Ultra presets at 1080p?

A: At 1920x1080, the Low preset achieves an average of 131 FPS, while the Ultra preset achieves an average of 64 FPS. This is a 67 FPS difference, or about a 51% reduction in performance, for the increased visual quality.

Q: What are the minimum and maximum FPS on the Medium preset?

A: The data provides this information for all resolutions. At 1920x1080, the Medium preset has a minimum of 88 FPS and a maximum of 119 FPS. At 2560x1440, it has a minimum of 58 and a maximum of 78. At 3840x2160, it has a minimum of 32 and a maximum of 43.

CPU Role

The AMD Ryzen 7 9800X3D plays a supporting role in this configuration, providing more than enough computational power for Fivem. With 8 cores and 16 threads, based on the Zen 5 architecture, it is a high-end processor. Its benchmark scores are impressive, including a Cinebench R23 multi-core score of 23230 and a single-core score of 2080. The Geekbench multi-core and single-core scores are 18696 and 2964, respectively.

The CPU's performance is confirmed by its PassMark multi-thread score of 40009 and single-thread score of 4430. Its 96 MB of shared L3 cache is a key feature for gaming, though the data does not show a specific benefit in Fivem due to the GPU bottleneck. The CPU's percentile ranking of 87 versus all CPUs indicates it is in the top 13%, and its average benchmark score of 39768 is within 0.8% of its nearest rivals, such as the AMD Ryzen 7 7700.

In the measured FPS data, the CPU's impact is not visible. The frame rates are consistently limited by the GPU, as evidenced by the resolution scaling. The CPU is not preventing the system from achieving its maximum potential; rather, the GTX 1070 is the glass ceiling. The data suggests that a user could upgrade the GPU without needing to change the CPU, as the 9800X3D would not be a limiting factor.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the system's performance across all resolutions and settings. At 1920x1080, the system is most capable. The Low preset averages 131 FPS, which is the highest measured value. The Medium preset averages 103 FPS, with a minimum of 88 and a maximum of 119. The High preset averages 82 FPS, and the Ultra preset averages 64 FPS. All settings are playable at this resolution.

At 2560x1440, performance drops noticeably. The Low preset averages 86 FPS. The Medium preset averages 68 FPS, with a minimum of 58 and a maximum of 78. The High preset averages 54 FPS, and the Ultra preset averages 42 FPS. The data shows that high and ultra settings are only marginally playable at this resolution.

At 3840x2160, performance is severely constrained. The Low preset averages 48 FPS. The Medium preset averages 38 FPS, with a minimum of 32 and a maximum of 43. The High preset averages 30 FPS, and the Ultra preset averages 23 FPS. The data shows that this resolution is only viable with the Low preset, and even then, the frame rate is not high.

The data shows a clear linear progression: for each preset, the FPS drops by approximately 35-40% from 1080p to 1440p, and then another 35-40% from 1440p to 4K. This consistent pattern across all settings underscores that the GPU is the sole determinant of frame rate, with the CPU playing no measurable role in limiting performance.