Fivem

The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 3080 Ti combination delivers a robust Fivem experience, particularly at 1440p and 1080p, where the hardware headroom allows for high refresh rate play. The measured data shows that the Ultra preset creates a significant performance burden, while the High preset offers the most balanced experience across all resolutions, maintaining playable frame rates even at 4K.

Settings Recommendations

The benchmark results indicate a clear hierarchy in performance scaling with the measured presets. At 4K, the Ultra preset yields an average of 43.7 FPS, which is below the threshold for smooth, competitive play in a multiplayer environment. Dropping to High at the same resolution raises the average to 59.1 FPS, a substantial improvement that crosses into the range where gameplay feels responsive. The Medium preset at 4K provides an average of 76.6 FPS, offering an even greater margin of fluidity, while the Low preset achieves 93.1 FPS.

For users prioritizing a consistent competitive edge, the High preset at 2560x1440 is the optimal choice, delivering an average of 107 FPS. This frame rate is substantially higher than the 84 FPS seen at Ultra, and it maintains a level of visual fidelity that is not drastically reduced compared to the higher preset. At 1920x1080, the High preset achieves an average of 164.6 FPS, which is an excellent result for high-refresh-rate monitors, while the Medium preset reaches 204 FPS for those seeking maximum responsiveness.

The data suggests that the Ultra preset is disproportionately demanding relative to the performance gain it provides. The step from High to Ultra at 1080p results in a drop from 164.6 FPS to 125.8 FPS, a loss of roughly 24% performance. Given that the High preset offers the best compromise between visual quality and frame rate stability across all three resolutions, it is the recommended setting for this configuration. The Low preset, while delivering the highest frame rates (258.2 FPS at 1080p), sacrifices too much visual clarity for most users, making High the sweet spot for the Ryzen 7 7700 and RTX 3080 Ti pairing.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is the primary driver of frame rate in Fivem, as evidenced by the performance scaling across settings. The GPU’s 12 GB of GDDR6X memory on a 384-bit bus provides a substantial 912.4 GB/s of bandwidth, which is critical for handling the high-resolution textures and complex geometry typical of multiplayer modding scenarios. The card’s Ampere architecture, built on an 8 nm process, features 10,240 shading units and a boost clock of 1665 MHz, allowing it to process the large amounts of pixel and texture data required at high settings.

The data shows that the GPU’s compute capabilities are well-utilized. At 4K, the transition from Low to Ultra settings increases the load significantly, dropping the average frame rate from 93.1 FPS to 43.7 FPS. This 53% reduction in performance highlights the GPU’s sensitivity to shader complexity and draw calls. The RTX 3080 Ti’s FP32 performance of 34.10 TFLOPS is a key factor in its ability to maintain high throughput in this title, which relies heavily on traditional rasterization rather than ray tracing.

The GPU’s 83rd percentile ranking among all tested GPUs, with an average benchmark score of 41,224, places it in the upper echelon of graphics cards. Its nearest rival, the NVIDIA GeForce RTX 3090, scores slightly higher at 41,441, a delta of -0.5%, indicating that the 3080 Ti performs nearly identically to its higher-tier sibling in synthetic tests. This close margin is reflected in the game’s frame rates, where the 3080 Ti’s 12 GB frame buffer proves sufficient for 4K High settings, though the Ultra preset at 4K appears to exceed the card’s comfortable operating range.

CPU Role

The AMD Ryzen 7 7700 provides a solid foundation for the RTX 3080 Ti, with its 8 cores and 16 threads ensuring that the GPU is not starved of data. The CPU’s Zen 4 architecture, clocked at a base of 3.80 GHz and a boost of 5.30 GHz, offers strong single-thread performance, as indicated by its 3DMark single-thread score of 1,049 and Cinebench R23 single-core score of 4,136. This is crucial for Fivem, which often has a single primary simulation thread that can become a bottleneck if the processor’s single-core speed is insufficient.

In multiplayer scenarios, the CPU’s multi-threaded capabilities also come into play. The Ryzen 7 7700’s 3DMark max-threads score of 8,479 and Cinebench R23 multi-core score of 29,302 demonstrate its ability to handle the overhead of server-side scripting and player entity management. The CPU’s 32 MB of shared L3 cache helps reduce memory latency, which is beneficial for the rapid data access patterns seen in dynamic game worlds.

The data indicates that the CPU is not the limiting factor in most tested configurations. At 1080p Low, the average frame rate of 258.2 FPS is primarily GPU-bound, as the RTX 3080 Ti is capable of rendering frames faster than the CPU can issue draw calls. However, the CPU’s performance headroom is evident when comparing the 1080p High result of 164.6 FPS to the 1440p High result of 107 FPS; the scaling is nearly linear with pixel count, suggesting the CPU maintains a consistent feed rate. The Ryzen 7 7700’s 91st percentile ranking among all CPUs, with an average benchmark score of 40,468, confirms its position as a high-end processor that complements the GPU well.

How This Combo Ranks

This specific combination of the AMD Ryzen 7 7700 and NVIDIA GeForce RTX 3080 Ti ranks 492nd out of 1,792 tested combinations in Fivem. This places the pairing in the 72.5th percentile of all configurations, indicating that it outperforms the majority of systems tested while not being at the absolute top tier. The ranking reflects the balance between the CPU’s strong multi-threading and the GPU’s high rasterization throughput.

When examining the CPU’s nearest rivals, the data shows that the Ryzen 7 7700 is closely matched with the AMD Ryzen 9 7940H (delta of 0.1%) and the Intel Core i9-13905H (delta of -0.6%). This suggests that in CPU-bound scenarios, the 7700’s performance is nearly equivalent to these alternatives, and the overall combo ranking is more heavily influenced by the GPU. The RTX 3080 Ti’s nearest rival, the RTX 3090, has a delta of -0.5%, meaning the 3080 Ti is slightly slower but within a negligible margin.

The combo’s rank of 492 out of 1,792 suggests that while this system is powerful, there are numerous configurations with newer GPUs or higher-core-count CPUs that achieve better frame rates in Fivem. The data implies that the pairing is well-suited for high-refresh-rate 1440p gaming, but it is not optimized for 4K Ultra settings, which is reflected in the measured frame rates. The system’s performance is consistent with its component rankings, delivering a solid, but not class-leading, experience.

Resolution Scaling

The measured frame rates show a clear pattern of performance degradation as resolution increases, indicating the growing dominance of the GPU as the limiting component. At 1080p High, the system achieves an average of 164.6 FPS. Moving to 1440p High, the average drops to 107 FPS, a reduction of 35%. This scaling is expected, as the number of pixels increases by a factor of 1.78 from 1080p to 1440p, and the frame rate drop is proportional to the increased pixel fill rate demand.

The transition from 1440p High to 4K High is more severe, with the average falling from 107 FPS to 59.1 FPS, a 45% decrease. This steeper decline is attributed to the 2.25x pixel increase from 1440p to 4K, which pushes the RTX 3080 Ti’s memory bandwidth and shading units to their limits. The GPU’s 912.4 GB/s of bandwidth becomes a critical factor at 4K, as the larger frame buffer requires more data to be moved per frame.

The data reveals that the CPU’s influence wanes as resolution increases. At 1080p Low, the average frame rate of 258.2 FPS is likely near the CPU’s maximum output capability, as the GPU can render frames quickly enough to expose any CPU bottleneck. However, at 4K Low, the average of 93.1 FPS is substantially lower, demonstrating that the GPU’s rendering capacity is now the primary constraint. This shift in bottleneck behavior is typical, with the CPU’s role diminishing from a near-equal partner at 1080p to a supporting role at 4K. The diminishing returns from 1440p to 4K, particularly at High settings where the frame rate nearly halves, confirm that the RTX 3080 Ti is the limiting factor in this pairing for high-resolution gaming.