Evolve

The Intel Core i5-14400F and NVIDIA GeForce RTX 3060 Ti pairing delivers a highly capable Evolve experience, with the data showing that the combination ranks 883rd out of 1695 tested configurations. The GPU, which sits in the 69th percentile of all graphics cards, proves to be the dominant factor in most scenarios, though the processor’s 88th percentile standing and strong multi-core Cinebench R23 score of 21914 ensure it never becomes a bottleneck at lower resolutions.

FAQ

Q: What is the best resolution for this setup in Evolve?

A: The data shows that 1920x1080 is the sweet spot, with all settings except Ultra delivering over 119 frames per second. At 2560x1440, even High settings produce 82.9 FPS, while 3840x2160 requires Low settings to maintain a playable 75.2 FPS.

Q: How does the RTX 3060 Ti compare to its closest rivals?

A: The RTX 3060 Ti’s average benchmark score of 25120 places it within 0.7% of the AMD Radeon RX 580 2048SP and within 0.5% of the AMD Radeon RX 6600, indicating near-identical overall performance in synthetic tests.

Q: Is the Core i5-14400F strong enough for Evolve?

A: Yes, the processor’s 88th percentile ranking and Cinebench R23 multi-core score of 21914 show it has ample headroom. The data reveals that at 1920x1080 Low settings, the system reaches 198.5 FPS, suggesting the CPU is not limiting frame rates in this game.

Q: What is the frame rate drop from 1080p to 4K?

A: At High settings, average FPS falls from 119.8 at 1920x1080 to 82.9 at 2560x1440, then to 46.1 at 3840x2160. This represents a 61.5% reduction from 1080p to 4K, clearly indicating GPU-bound scaling.

Q: Does the 8 GB VRAM affect 4K performance?

A: The RTX 3060 Ti features 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth. At 3840x2160 Ultra settings, the average FPS drops to 32.6, which suggests the combination of memory capacity and bandwidth limits high-detail 4K performance.

Q: Which settings preset is most balanced at 2560x1440?

A: The Medium preset provides the best balance, delivering 105.4 FPS average. This is notably higher than High’s 82.9 FPS and far superior to Ultra’s 53.8 FPS, making Medium the optimal choice for smooth gameplay at this resolution.

GPU Role

The NVIDIA GeForce RTX 3060 Ti, based on the GA104 chip and Ampere architecture, serves as the primary performance driver in Evolve. With a boost clock of 1665 MHz and 4864 shading units, the card delivers 16.20 TFLOPS of FP32 compute, which the benchmark data confirms is sufficient for high-refresh-rate 1080p gaming. The 8 GB of GDDR6 memory, operating at 14 Gbps effective across a 256-bit bus, provides 448.0 GB/s of bandwidth—a figure that becomes increasingly relevant as resolution scales upward.

The GPU’s 69th percentile ranking against all graphics cards places it in the upper-midrange tier, and its nearest rivals include the AMD Radeon RX 6700M and RX 6600, both within 0.5% of its average score. In Evolve specifically, the data shows the RTX 3060 Ti handling 1920x1080 Ultra at 83.9 FPS, which indicates that even the most demanding settings remain playable at Full HD. The card’s 200 W TDP and dual-slot design are consistent with its performance class, while the 1x 12-pin power connector and 550 W suggested PSU are standard for this tier.

The measured results reveal that GPU load scales predictably with settings. At 3840x2160, the gap between Low (75.2 FPS) and Ultra (32.6 FPS) is 42.6 FPS, demonstrating that the card’s compute resources and memory subsystem are heavily taxed by high-detail 4K rendering. The texture rate of 253.1 GTexel/s and pixel rate of 133.2 GPixel/s provide the raw throughput needed for Evolve’s environments, but the data suggests that 8 GB VRAM becomes a limiting factor at Ultra 4K, where average FPS falls below 35.

Resolution Scaling

The frame rate progression across resolutions shows a clear GPU-bound pattern, with the CPU maintaining sufficient headroom throughout. At Low settings, average FPS goes from 198.5 at 1920x1080 to 133.5 at 2560x1440, then to 75.2 at 3840x2160. This represents a 32.7% drop from 1080p to 1440p and a further 43.7% drop from 1440p to 4K, illustrating the exponential cost of pixel count increases.

At Medium settings, the scaling is similar: 155.9 FPS at 1080p, 105.4 FPS at 1440p, and 56.3 FPS at 4K. The High preset shows 119.8, 82.9, and 46.1 FPS respectively, while Ultra drops from 83.9 to 53.8 to 32.6. The consistent pattern across all presets—roughly a 30-35% reduction per resolution step—confirms that the RTX 3060 Ti’s fill rate and memory bandwidth are the primary constraints, not the i5-14400F’s processing power.

The data indicates that 2560x1440 represents the practical ceiling for this configuration in Evolve. At this resolution, even High settings maintain 82.9 FPS, which is above the 60 FPS threshold for smooth gameplay. Moving to 3840x2160 requires dropping to Low settings to exceed 75 FPS, and even then, the experience is less consistent than at lower resolutions. The 4K Ultra result of 32.6 FPS clearly shows that this pairing is not suited for maximum-detail 4K gaming in Evolve, regardless of the CPU’s capabilities.

Measured FPS Breakdown

At 1920x1080, the RTX 3060 Ti delivers exceptional performance across all presets. Low settings produce 198.5 FPS average, which allows for maximum refresh-rate utilization on high-end monitors. Medium settings remain highly fluid at 155.9 FPS, while High still achieves 119.8 FPS—all well above the 60 FPS playability threshold. Ultra settings drop to 83.9 FPS, which is still smooth but represents a 43.3% reduction from High, indicating a significant performance cost for the highest visual quality.

Moving to 2560x1440, the frame rates remain respectable but show the GPU’s limitations emerging. Low settings deliver 133.5 FPS, Medium provides 105.4 FPS, and High sustains 82.9 FPS. Ultra falls to 53.8 FPS, which is below the 60 FPS standard for competitive play, though still playable for casual sessions. The gap between High and Ultra at this resolution is 29.1 FPS, demonstrating that the Ultra preset’s additional effects heavily tax the Ampere architecture.

At 3840x2160, the configuration struggles to maintain high refresh rates. Low settings achieve 75.2 FPS, which is playable, but Medium drops to 56.3 FPS and High to 46.1 FPS. Ultra settings produce 32.6 FPS, which is borderline unplayable for an FPS title. The data shows a consistent pattern: each settings tier at 4K performs roughly equivalent to two tiers lower at 1440p, confirming that the RTX 3060 Ti’s 448.0 GB/s bandwidth is insufficient for 4K Ultra gaming in Evolve.

Settings Recommendations

For 1920x1080 gaming, the Ultra preset at 83.9 FPS is the recommended choice, as it provides the best visual quality while still exceeding 60 FPS. Players with high-refresh-rate monitors may prefer High at 119.8 FPS, which offers nearly 36 additional frames per second with only a modest visual reduction. The Medium preset at 155.9 FPS is suitable for competitive play where maximum frame rates are prioritized over graphical fidelity.

At 2560x1440, the Medium preset offers the best overall experience, balancing the 105.4 FPS average with reasonable visual quality. High settings at 82.9 FPS are also viable for users who prioritize image clarity, but the 22.5 FPS difference between High and Medium suggests that the Medium preset provides a more consistent frame pacing. The Ultra preset at 53.8 FPS is not recommended, as the drop below 60 FPS introduces noticeable stutter in fast-paced FPS scenarios.

For 3840x2160, only the Low preset at 75.2 FPS is recommended for playable performance. Medium at 56.3 FPS and High at 46.1 FPS both fall below the 60 FPS threshold, which is generally considered the minimum for enjoyable FPS gameplay. The Ultra preset at 32.6 FPS should be avoided entirely. The data indicates that this resolution is best reserved for screenshots or non-competitive play, as the RTX 3060 Ti’s memory architecture simply cannot sustain high-detail 4K in Evolve.