Evolve
This combination delivers exceptional performance with an average of 125 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 64 | 75 | 99 |
| 1440p QHD | 74 | 106 | 134 | 177 |
| 1080p Full HD | 110 | 158 | 202 | 262 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Evolve with AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis
Resolution Scaling
The measured FPS data for Evolve with the AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 3080 Ti reveals a clear and predictable pattern of performance scaling as resolution increases. At 1080p with High settings, the combo produces 158.2 FPS. Moving to 1440p at the same settings drops this to 105.6 FPS, a reduction of roughly one-third. At 4K, the frame rate falls to 63.8 FPS, which is about 40% lower than the 1440p result. This scaling curve is a classic indicator of where the performance bottleneck lies.
The data suggests that at 1080p, the system is not fully GPU-bound. The jump from 201.5 FPS at Medium to 261.7 FPS at Low settings demonstrates that the CPU has plenty of headroom to feed the graphics card when the workload is lightened. If the GPU were the sole limiting factor, the frame rate would scale more linearly with the settings changes. Instead, the 1080p results show a wider spread, hinting that the processor's Zen 3 architecture and its 96 MB of shared L3 cache are keeping up with the demands of the game engine, allowing the GPU to stretch its legs.
At 1440p, the balance shifts. The performance drop from High to Ultra is significant, going from 105.6 FPS to 73.9 FPS. This indicates that the GPU is starting to become the primary constraint, as the increased pixel count places a heavier load on the RTX 3080 Ti's 12 GB of GDDR6X memory and its 10240 shading units. The 4K results confirm this trend. The gap between Low and Ultra settings at 4K is massive, spanning from 99 FPS down to 44.8 FPS, which shows that the graphics card is struggling to maintain high frame rates at the highest fidelity.
The implication is that for a game like Evolve, which is from 2015, the Ryzen 7 5800X3D is more than capable of handling the CPU-side logic at any resolution. The RTX 3080 Ti becomes the determining factor for achieving high refresh rates at higher resolutions. The 4K Low setting result of 99 FPS is particularly telling; it shows that even when the GPU workload is reduced, the frame rate does not approach the 261.7 FPS seen at 1080p Low, reinforcing that resolution scaling is heavily dependent on the GPU's fill rate and memory bandwidth.
GPU Role
The NVIDIA GeForce RTX 3080 Ti is the undisputed workhorse in this configuration for Evolve. Its role is defined by its memory subsystem and clock speeds, which directly influence the measured performance. The GPU operates at a boost clock of 1665 MHz, and its 12 GB of GDDR6X memory runs at an effective speed of 19 Gbps. This memory configuration provides a bandwidth of 912.4 GB/s, which is crucial for feeding the high pixel throughput required at 4K resolution.
This bandwidth becomes a pivotal factor when examining the 4K Ultra result of 44.8 FPS. The sheer volume of texture data and shader instructions required at that setting likely saturates the memory bus. The data shows a clear progression from 99 FPS at Low to 75.4 FPS at Medium, then to 63.8 FPS at High, and finally to 44.8 FPS at Ultra. This pattern indicates that each step up in settings increases the memory pressure and shader complexity, and the GPU's ability to process these instructions at its boost clock is the limiting factor.
The GPU's benchmark scores also place it in context. Its passmark_g3d score is 26896, and it achieves an avgBenchmarkScore of 41224. Its nearest rivals include the NVIDIA GeForce RTX 3090, which scores slightly higher at 41441, a deltaPct of -0.5%. This suggests that in synthetic benchmarks, the RTX 3080 Ti is nearly on par with the 3090, but in Evolve, the actual frame rates will depend on how well the game's engine utilizes the Ampere architecture's features, such as its 80 RT cores and 320 Tensor Cores, which are not directly stressed in this non-ray-traced title.
The performance at 1440p High (105.6 FPS) and 1080p High (158.2 FPS) shows that the GPU has significant headroom when not constrained by 4K. The jump from 73.9 FPS at 1440p Ultra to 134.2 FPS at 1440p Medium suggests that the graphics card's raw compute power (34.10 TFLOPS FP32) is sufficient for high refresh rate gaming at lower resolutions, but the game's Ultra preset likely includes effects that heavily tax the memory bandwidth or fill rate. The data implies that for a smooth experience, tuning settings below Ultra is more effective than relying on raw GPU power alone.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this hardware combination depend on the target resolution and desired frame rate. At 1080p, all presets are playable, but the data suggests that High settings at 158.2 FPS provides an excellent balance. Dropping to Medium yields 201.5 FPS, which is a 27% improvement, but the visual fidelity loss may not be worth it for a game like Evolve. The Ultra preset at 110 FPS is also viable, offering a high frame rate while pushing the GPU to its limits.
For 1440p, the recommendation is to use High settings, which delivers 105.6 FPS. This is a solid frame rate for a fast-paced FPS, and it avoids the significant performance hit seen at Ultra (73.9 FPS). The Medium preset at 134.2 FPS is an option for players who prioritize smoothness over visual quality, as it offers a 27% increase over High. The Low preset at 176.7 FPS is overkill for most monitors and suggests that the game is not demanding enough to require such a low-quality setting.
At 4K, the situation becomes more delicate. The High preset at 63.8 FPS is technically playable, but it sits below the 60 FPS threshold for some players, and the Ultra preset at 44.8 FPS is not recommended for a competitive FPS. The Medium preset at 75.4 FPS is the best choice for 4K, as it maintains a playable frame rate while offering a better visual experience than Low. The Low preset at 99 FPS is a viable alternative for those who want to maximize frame rate, but the data suggests that Medium is the sweet spot, providing a 16% improvement in frame rate over High while retaining most visual features.
The data clearly indicates that the Ultra preset is poorly optimized for this GPU at higher resolutions in Evolve. The performance drops from 4K High to 4K Ultra (63.8 to 44.8 FPS) represent a 30% decrease, which is a significant loss for a setting that likely offers diminishing visual returns. Players should treat Ultra as a showcase mode rather than a competitive setting.
How This Combo Ranks
The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 3080 Ti combination ranks 460th out of 1695 tested combos for Evolve. This places it in the top 27% of all tested configurations, indicating a strong performance level for this specific title. The rank is a composite metric that reflects the measured FPS across all resolutions and settings, and it shows that this combo is well above average.
Given the hardware's pedigree, this rank is somewhat expected but still informative. The CPU's percentileVsAllCpus is 83, and the GPU's percentileVsAllGpus is also 83, meaning both components are in the top 17% of their respective categories. However, the combo's rank of 460 out of 1695 suggests that there are many other combinations that perform better in Evolve, likely featuring newer or higher-tier GPUs.
The nearest rivals for the CPU include the Intel Core i9-11900K, which has an avgScore of 26546 and a deltaPct of 0.1% compared to the 5800X3D's 26574. This indicates that the Ryzen 7 5800X3D is essentially tied with the i9-11900K in synthetic benchmarks, but its 3D V-Cache may provide an edge in gaming. For the GPU, the nearest rival is the NVIDIA GeForce RTX 3090, which scores 41441, a deltaPct of -0.5% versus the RTX 3080 Ti's 41224. This close margin in synthetic tests suggests that the 3080 Ti is a near-flagship part, but the rank in Evolve is more dependent on the game's specific engine requirements.
The data implies that to rank higher in Evolve, a combination with a more powerful GPU, such as one with higher memory bandwidth or more shading units, would be necessary. The current combo is balanced, but for a game that is now nearly a decade old, the bottleneck is almost certainly the GPU at higher resolutions, meaning the CPU's strong single-thread performance is not being fully utilized to push the rank higher.
FAQ
Q: What is the average FPS at 1080p with High settings?
A: The average FPS is 158.2, which provides a smooth experience for a fast-paced FPS.
Q: Is the Ultra preset playable at 4K?
A: The Ultra preset at 4K yields an average FPS of 44.8, which is below the typical 60 FPS target for smooth gameplay.
Q: How much faster is 1080p Low compared to 4K Ultra?
A: The 1080p Low preset achieves 261.7 FPS, while 4K Ultra achieves 44.8 FPS, making the 1080p Low result approximately 5.8 times faster.
Q: What is the best settings preset for 1440p to maintain high frame rates?
A: The High preset at 1440p delivers 105.6 FPS, offering a good balance between visual quality and performance. The Medium preset at 134.2 FPS is also viable for higher refresh rates.
Q: How does this combo rank among all tested combinations for Evolve?
A: This combo ranks 460th out of 1695 tested combinations, placing it in the top 27% of all configurations.
Q: Does the CPU limit performance at 4K?
A: The data suggests no. At 4K, the frame rates are significantly lower across all settings, indicating the GPU is the limiting factor. The CPU's strong multi-threaded performance (Cinebench R23 multicore score of 24063) ensures it is not a bottleneck at higher resolutions.
Measured FPS Breakdown
The following table details the exact measured average FPS for each resolution and settings preset:
| Resolution | Settings | Avg FPS |
| :--------- | :------- | ------: |
| 4K (3840x2160) | Low | 99.0 |
| 4K (3840x2160) | Medium | 75.4 |
| 4K (3840x2160) | High | 63.8 |
| 4K (3840x2160) | Ultra | 44.8 |
| 1440p (2560x1440) | Low | 176.7 |
| 1440p (2560x1440) | Medium | 134.2 |
| 1440p (2560x1440) | High | 105.6 |
| 1440p (2560x1440) | Ultra | 73.9 |
| 1080p (1920x1080) | Low | 261.7 |
| 1080p (1920x1080) | Medium | 201.5 |
| 1080p (1920x1080) | High | 158.2 |
| 1080p (1920x1080) | Ultra | 110.0 |
The data shows a consistent scaling pattern. At 1080p, the difference between Low and Ultra is 151.7 FPS, highlighting the GPU's ability to handle high frame rates at lower resolutions. At 4K, the difference is 54.2 FPS, showing a tighter spread as the GPU becomes the primary constraint. The 1440p results sit in between, with a spread of 102.8 FPS.
CPU Role
The AMD Ryzen 7 5800X3D plays a supporting but critical role in this Evolve configuration. With 8 cores and 16 threads, its base clock is 3.40 GHz and it boosts up to 4.50 GHz. The processor's defining feature is its 96 MB of shared L3 cache, which is part of its Zen 3 architecture on the 7 nm process. This large cache is designed to reduce memory latency, which can be beneficial in gaming scenarios where data is frequently re-accessed.
In Evolve, the CPU's role is to handle game logic, physics, and AI, which are typically not as demanding as the GPU's rendering tasks. The measured FPS at 1080p Low (261.7 FPS) suggests that the CPU is not a limiting factor at lower resolutions, as the frame rate is high enough to expose any potential CPU bottleneck. The CPU's benchmark scores, such as the Cinebench R23 multicore score of 24063 and single-core score of 3397, indicate it has strong multi-threaded and single-threaded performance.
The data shows that the CPU's performance is sufficient to keep up with the GPU at all tested resolutions. The fact that frame rates drop significantly from 1080p to 4K at the same settings (e.g., High from 158.2 to 63.8 FPS) confirms that the GPU is the limiting factor, not the CPU. The CPU's near parity with its nearest rivals, such as the Intel Core i9-11900K (deltaPct of 0.1%), further underscores that its processing power is not a weakness in this setup.
The 5800X3D's 105 W TDP and support for DDR4 memory with a bandwidth of 51.2 GB/s are adequate for Evolve's requirements. The benchmark results imply that for a game from 2015, the CPU has ample headroom. Its 83rd percentile ranking against all CPUs suggests it is a high-end part, and its performance in this game is unlikely to be the reason for any frame rate drops. The CPU's role is to ensure that the GPU is fed with data without delays, and the data indicates it performs this task flawlessly, allowing the RTX 3080 Ti to be the sole determinant of performance.
Hardware Specifications
AMD Ryzen 7 5800X3D
NVIDIA GeForce RTX 3080 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 3080 Ti in Evolve
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 99.0 |
| 3840x2160 | Medium | 75.4 |
| 3840x2160 | High | 63.8 |
| 3840x2160 | Ultra | 44.8 |
| 2560x1440 | Low | 176.7 |
| 2560x1440 | Medium | 134.2 |
| 2560x1440 | High | 105.6 |
| 2560x1440 | Ultra | 73.9 |
| 1920x1080 | Low | 261.7 |
| 1920x1080 | Medium | 201.5 |
| 1920x1080 | High | 158.2 |
| 1920x1080 | Ultra | 110.0 |
Evolve with Ryzen 7 5800X3D + Other GPUs
See how Evolve performs with the same CPU but different graphics cards.
Evolve with RTX 3080 Ti + Other CPUs
See how Evolve performs with the same GPU but different processors.
Other Games with Ryzen 7 5800X3D + RTX 3080 Ti
Explore FPS benchmarks for other games using this same hardware combination.