Evolve

How This Combo Ranks

The AMD Ryzen 7 3700X paired with the NVIDIA GeForce RTX 4060 lands at rank 970 out of 1695 tested combos in Evolve. That places this pairing in the lower half of the database, but the context matters. The CPU is a strong performer on its own, sitting at the 85th percentile among all processors, while the GPU is more mid-pack at the 66th percentile among all graphics cards. The combination reflects that split: the processor has headroom, but the graphics card ultimately defines the ceiling for this game's frame rates.

Looking at the CPU's nearest rivals, the Ryzen 7 3700X is essentially tied with the Intel Core i5-12600, trailing by just 0.1% in average benchmark score. It also sits within 0.1% of the Intel Core i5-12600H, while leading the AMD Ryzen 5 5600XT and AMD EPYC 7203P by 0.1% and 0.2% respectively. This is a tightly clustered group, meaning the 3700X is not giving up meaningful ground to newer or more expensive processors in synthetic workloads.

The GPU tells a similar story of close competition. The RTX 4060 trails the AMD Radeon RX 6600M by 0.6% and the NVIDIA GeForce GTX 780 Ti by 0.7%, while leading the Intel Arc B580 by 0.7% and the AMD Radeon 760M by 0.8%. These are all within a single percentage point, so the 4060 sits in a crowded tier where no single card dominates. For Evolve specifically, the measured FPS data shows this combo is capable of playable frame rates at most settings, but the rank suggests that many other pairings can do better at the high end.

The Ryzen 7 3700X is an 8-core, 16-thread processor built on the Zen 2 architecture, using the 7nm process node. Its multi-threaded performance is solid, with a Cinebench R23 multi-core score of 19087 and a Geekbench multi-core score of 8083. Single-thread performance is respectable as well, with a Cinebench R23 single-core score of 2694. The 32MB of L3 cache and dual-channel DDR4 memory support are typical for this generation, and the CPU's 65W TDP indicates efficient operation.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture using a 5nm process. It ships with 8GB of GDDR6 memory on a 128-bit bus, delivering 272.0 GB/s of bandwidth. The base clock runs at 1830 MHz with a boost clock of 2460 MHz, and memory operates at 2125 MHz (17 Gbps effective). These specifications place the card firmly in the mainstream segment, and the benchmark results reflect that positioning.

For Evolve, the GPU's 8GB VRAM capacity is the primary constraint at higher resolutions. At 3840x2160 with Ultra settings, the combo manages only 33.7 FPS, while dropping to High raises that to 41.4 FPS. The jump from High to Medium yields 57.7 FPS, and Low hits 73.6 FPS. The pattern is clear: VRAM pressure and memory bandwidth limit performance at 4K, regardless of the CPU's capabilities.

At 2560x1440, the situation improves notably. Low settings produce 125.9 FPS, Medium hits 101.1 FPS, and High delivers 75.1 FPS. Ultra drops to 56.7 FPS, which is still playable but not ideal for a fast-paced FPS. At 1920x1080, the card shows its strength: Low reaches 192.9 FPS, Medium hits 144.3 FPS, and High delivers 116.8 FPS. Ultra at 1080p manages 81.1 FPS, which is smooth enough for most players.

The RTX 4060's 3072 shading units, 96 texture mapping units, and 48 raster output pipelines are well-suited for a game like Evolve, which is not particularly demanding by modern standards. The 24 ray tracing cores and 96 tensor cores are present but irrelevant here, as Evolve does not utilize those features. The card's 15.11 TFLOPS of FP32 compute and 118.1 GPixel/s pixel rate are adequate for the game's visual effects, but the 128-bit memory bus is the limiting factor at high resolutions.

FAQ

Q: Is the AMD Ryzen 7 3700X + RTX 4060 combo capable of running Evolve at 4K?

A: Yes, but with compromises. The measured data shows 41.4 FPS at High settings and 33.7 FPS at Ultra for 3840x2160. For a smoother experience, Medium settings yield 57.7 FPS, and Low reaches 73.6 FPS.

Q: What is the best resolution for this combo in Evolve?

A: The data shows 1920x1080 provides the most consistent results, with 116.8 FPS at High settings and 144.3 FPS at Medium. At 2560x1440, High settings deliver 75.1 FPS, which is also acceptable.

Q: How does the RTX 4060 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 4060's average benchmark score of 23181 is within 0.8% of the AMD Radeon RX 6600M, NVIDIA GeForce GTX 780 Ti, Intel Arc B580, and AMD Radeon 760M. It trails the RX 6600M by 0.6% and leads the Arc B580 by 0.7%.

Q: Does the Ryzen 7 3700X bottleneck the RTX 4060 in Evolve?

A: The CPU's 85th percentile ranking and multi-core scores (19087 in Cinebench R23) suggest it has ample headroom. The GPU's 66th percentile ranking indicates it is the limiting factor, particularly at 4K where the 8GB VRAM and 128-bit bus constrain performance.

Q: What is the difference between Low and Ultra settings at 1080p?

A: The measured data shows 192.9 FPS at Low versus 81.1 FPS at Ultra, a difference of 111.8 FPS. Medium settings sit at 144.3 FPS, and High at 116.8 FPS, offering a balanced middle ground.

Q: How does the Ryzen 7 3700X's single-thread performance affect gaming?

A: The CPU's single-core Cinebench R23 score of 2694 and Geekbench single-core score of 1672 are competitive. Its nearest rivals, the Intel Core i5-12600 and i5-12600H, are within 0.1% in average score, so there is no meaningful single-thread disadvantage.

Settings Recommendations

The measured FPS data points to 1920x1080 as the sweet spot for this combo in Evolve. High settings deliver 116.8 FPS, which is well above the 60 FPS threshold for smooth gameplay and leaves room for drops without becoming noticeable. Medium settings push further to 144.3 FPS, ideal for high-refresh-rate monitors, while Low reaches 192.9 FPS for competitive play. Ultra at 81.1 FPS is still playable but offers diminishing returns over High.

For 2560x1440, High settings at 75.1 FPS are the recommended choice. This maintains a comfortable frame rate while preserving visual fidelity. Medium at 101.1 FPS is also viable, and Low at 125.9 FPS is excellent for those prioritizing speed over visuals. Ultra at 56.7 FPS dips below the 60 FPS mark, so it is not recommended unless visual quality takes absolute precedence.

At 3840x2160, the data suggests avoiding Ultra entirely, as 33.7 FPS is not suitable for a fast-paced FPS. Medium at 57.7 FPS is borderline, but Low at 73.6 FPS provides the best playable experience at this resolution. High at 41.4 FPS falls short of smooth gameplay, making Low the only setting that consistently holds above 60 FPS.

The overall recommendation is to run Evolve at 1920x1080 with High settings for the best balance of visuals and performance. If a higher frame rate is desired, Medium offers a 27.5 FPS improvement over High. For 1440p users, High is the default choice, with Medium as a fallback for demanding scenes.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings levels, providing a comprehensive view of this combo's performance in Evolve. All numbers represent average FPS, with no min or max values recorded.

At 3840x2160, the results are as follows: Low settings produce 73.6 FPS, Medium yields 57.7 FPS, High delivers 41.4 FPS, and Ultra drops to 33.7 FPS. The gap between Low and Ultra is 39.9 FPS, showing the significant cost of higher visual fidelity at 4K.

Moving to 2560x1440, the data shows 125.9 FPS at Low, 101.1 FPS at Medium, 75.1 FPS at High, and 56.7 FPS at Ultra. This represents a 69.2 FPS spread from Low to Ultra, with the step from Medium to High being the largest single drop at 26 FPS.

At 1920x1080, the combo performs best: Low reaches 192.9 FPS, Medium hits 144.3 FPS, High delivers 116.8 FPS, and Ultra manages 81.1 FPS. The difference between Low and Ultra is 111.8 FPS, more than double the 4K spread, demonstrating how resolution scaling impacts the GPU's workload.

Comparing resolutions at the same settings, 1080p High is 55.5% faster than 1440p High (116.8 vs 75.1 FPS), and 1440p High is 81.4% faster than 4K High (75.1 vs 41.4 FPS). At Low settings, 1080p leads 1440p by 53.2% (192.9 vs 125.9 FPS), and 1440p leads 4K by 71.1% (125.9 vs 73.6 FPS). These figures illustrate the steep performance cost of higher resolutions on the RTX 4060's 128-bit memory bus and 8GB VRAM capacity.

The data consistently shows that Low settings provide the highest frame rates at every resolution, while Ultra provides the lowest. Medium and High sit in between, with High generally offering the best visual quality per frame rate cost at 1080p and 1440p, but not at 4K where Low is the only setting that consistently exceeds 60 FPS.