Downfall

The Intel Core i7-12700KF paired with the NVIDIA GeForce RTX 4070 Ti delivers a top-tier experience in Downfall, ranking 213th out of 1,741 tested combos. This places the configuration in the 88th percentile of all tested systems, indicating that it outperforms the vast majority of setups for this specific title. The data shows a combination that is overwhelmingly GPU-bound at higher resolutions, while the processor’s strong multi-threaded capabilities ensure it never becomes a bottleneck, even at lower settings where frame rates exceed 360 FPS.

How This Combo Ranks

The combo’s rank of 213 out of 1,741 tested configurations is a strong indicator of its high-end status for Downfall. This placement means roughly 88% of all tested systems perform worse in this game. The ranking reflects a balanced pairing where the RTX 4070 Ti's raw graphics power is fully supported by the i7-12700KF's processing throughput. Benchmark results indicate that this system is not merely capable but is positioned in the upper echelon for horror titles, which often demand high frame rates for smooth, immersive gameplay. While the exact percentile is not listed, the rank itself—placing it in the top 12.2% of all combos—confirms that users can expect excellent performance headroom across all settings. The GPU's average benchmark score of 44,900 places it slightly below the NVIDIA GeForce RTX 5090 Mobile (45,152, deltaPct -0.6%) and the Intel Arc A730M (45,592, deltaPct -1.5%), but it is ahead of the AMD Radeon Pro 580 (44,195, deltaPct 1.6%) and the AMD Radeon Pro 5500 XT (45,642, deltaPct -1.6%). This suggests the graphics card is competitive with top-tier mobile and professional solutions, even though it is an end-of-life desktop product.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is the primary driver of performance in Downfall, especially at 4K resolution. Its 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which is sufficient for the game’s high-resolution textures. The GPU’s boost clock of 2610 MHz (base 2310 MHz) and its 7,680 shading units allow it to handle the most demanding scenes. The data shows a clear hierarchy: at 3840x2160, the average FPS drops from 165.4 on Low to 68.4 on Ultra, a reduction of 97 FPS (58.6%). This demonstrates that the GPU is the limiting factor at 4K, as the processor’s role diminishes with the increased pixel count. The GPU’s 85th percentile ranking among all GPUs, with an average score of 44,900, reinforces its high-end status. Its nearest rival, the RTX 5090 Mobile, is only 0.6% faster, while the Intel Arc A730M is 1.5% faster, indicating that the RTX 4070 Ti is within a small margin of much newer or specialized hardware.

Resolution Scaling

The performance scaling from 1080p to 4K reveals a classic GPU-bound scenario. At 1920x1080, the combo achieves 365.5 FPS on Low settings, but this drops to 261.2 FPS at 2560x1440 and further to 165.4 FPS at 3840x2160. This represents a 54.7% drop in FPS from 1080p to 4K on Low settings. On Ultra settings, the drop is from 156.3 FPS at 1080p to 110.8 FPS at 1440p, and finally to 68.4 FPS at 4K, a total decrease of 56.2%. These numbers indicate that the RTX 4070 Ti’s performance scales predictably with resolution, and the CPU’s influence is most pronounced at 1080p. At 1080p Low, the 365.5 FPS figure is exceptionally high, suggesting the i7-12700KF can feed the GPU effectively. However, as resolution increases, the GPU’s workload becomes the dominant factor, and the CPU’s contribution diminishes. The data suggests that for competitive play at 1080p, the system is overkill, while for 4K Ultra, it still provides playable frame rates above 60 FPS.

FAQ

*Q: What is the best resolution for this combo in Downfall?*

A: The data shows 2560x1440 provides the best balance. At High settings, it achieves 175.6 FPS, which is 62.8% higher than 4K High (107.3 FPS) while still maintaining excellent visual quality. 1080p offers higher frame rates, but the difference from 1440p is less significant than the jump to 4K.

Q: How does the i7-12700KF compare to its closest rivals?

A: The i7-12700KF has an average benchmark score of 35,355. It is 0.1% faster than the Intel Core i5-14400 (35,336) and 0.2% faster than the Intel Core i9-12900HX (35,289). It is 0.2% slower than the Intel Core i7-13800H (35,416) and 0.3% faster than the Intel Core i5-13600T (35,256). This places it in a tightly contested performance band.

Q: Is the RTX 4070 Ti a good match for the i7-12700KF?

A: Yes. The GPU’s average score is 44,900, and the CPU’s multi-threaded score (Cinebench R23) is 28,979. The measured FPS data shows no obvious bottleneck at any resolution. At 1080p Low, the system hits 365.5 FPS, indicating the CPU can keep up with the GPU’s output.

Q: What is the frame rate difference between Medium and High settings at 1440p?

A: At 2560x1440, Medium settings yield an average of 213.8 FPS, while High settings yield 175.6 FPS. This is a difference of 38.2 FPS (17.9% slower), making High the better choice for visual fidelity without a major performance hit.

Q: Can this system handle 4K Ultra settings?

A: Yes, but with a caveat. At 3840x2160 Ultra, the average FPS is 68.4, which is above the 60 FPS threshold for smooth play. However, dropping to High settings increases the average to 107.3 FPS, a 56.9% improvement, which may be preferable for more demanding scenes.

Q: How does the GPU’s performance compare to its direct rivals?

A: The RTX 4070 Ti scores 44,900 on average. It is 0.6% slower than the RTX 5090 Mobile (45,152) and 1.5% slower than the Intel Arc A730M (45,592). It is 1.6% faster than the AMD Radeon Pro 580 (44,195) and 1.6% faster than the AMD Radeon Pro 5500 XT (45,642).

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across resolutions and settings.

1920x1080:

• Low: 365.5 FPS
• Medium: 298.4 FPS
• High: 243.9 FPS
• Ultra: 156.3 FPS

2560x1440:

• Low: 261.2 FPS
• Medium: 213.8 FPS
• High: 175.6 FPS
• Ultra: 110.8 FPS

3840x2160:

• Low: 165.4 FPS
• Medium: 134.4 FPS
• High: 107.3 FPS
• Ultra: 68.4 FPS

The data shows a consistent pattern: each step up in settings reduces FPS by a similar proportion across all resolutions. For example, moving from Medium to High at 1080p reduces FPS by 18.3%, while at 4K the reduction is 20.1%. The most significant drop occurs between High and Ultra, where 4K FPS falls from 107.3 to 68.4, a 36.3% decrease.

CPU Role

The Intel Core i7-12700KF plays a crucial role in ensuring the GPU is fully utilized. With 12 cores (20 threads) and a boost clock of 5.00 GHz, the processor excels in multi-threaded workloads, as evidenced by its Cinebench R23 multi-core score of 28,979. Its single-core performance is also strong, with a Geekbench single-core score of 2,526. In Downfall, the CPU’s influence is most apparent at 1080p, where frame rates exceed 300 FPS on lower settings. The 365.5 FPS at 1080p Low demonstrates that the CPU can deliver frames quickly enough to avoid bottlenecking the RTX 4070 Ti. The processor’s 89th percentile ranking among all CPUs, with an average benchmark score of 35,355, places it in the top tier. Its nearest rival, the Intel Core i5-14400, is nearly identical in performance (deltaPct 0.1%), while the i7-13800H is slightly faster (deltaPct -0.2%). This indicates that the i7-12700KF provides ample headroom for this game, and its 25 MB of shared L3 cache helps maintain high frame rates in complex scenes.

Settings Recommendations

For the best balance of visual quality and performance, the High preset at 2560x1440 is the recommended choice. This setting delivers an average of 175.6 FPS, which is more than sufficient for smooth gameplay while providing a significant visual upgrade over Medium. The data shows that High at 1440p (175.6 FPS) offers a 24.1% higher frame rate than Ultra at 1440p (110.8 FPS), with only a modest reduction in graphical fidelity. For users prioritizing maximum frame rates, the Low preset at 1920x1080 (365.5 FPS) is optimal, though it sacrifices visual detail. At 4K, the High preset (107.3 FPS) is the best option, as it maintains frame rates well above 60 FPS while avoiding the performance penalty of Ultra (68.4 FPS). The Medium preset is a viable middle ground, but the data indicates that High provides the best return on investment in terms of FPS per settings increment. Users with high-refresh-rate 1080p displays can comfortably use Ultra (156.3 FPS) to maximize visual quality without dropping below the 144 Hz threshold.