Downfall

Resolution Scaling

The measured frame rates for Downfall show a dramatic, non-linear drop as resolution climbs, and the shape of that curve points directly at the GPU as the primary limiter. At 1080p with Low settings, the combo produces 364.2 FPS, but at 4K Low, that falls to 165.3 FPS — a 54.6% reduction. This steep decline is classic GPU-bound behavior; the CPU is not the bottleneck at high settings, and the RTX 4070 Ti's workload scales heavily with pixel count.

The scaling pattern is consistent across all quality presets. Moving from 1440p to 4K at High settings drops the average from 175.1 FPS to 111.6 FPS, a 36.2% loss. At Ultra, the same resolution step cuts performance from 110.9 FPS to 69.2 FPS — a 37.6% reduction. These percentages reveal that the GPU's rendering pipeline is saturated at 4K, especially under Ultra where the 69.2 FPS result is barely above playable thresholds for a horror title demanding smooth motion.

The 1080p to 1440p transition tells a different story. At Low settings, 1080p yields 364.2 FPS while 1440p yields 264.8 FPS, a 27.3% drop. At High, the drop is 28.3% (244.3 to 175.1). These are smaller relative losses than the 1440p-to-4K steps, indicating that at 1080p and 1440p the system still has headroom — the CPU (AMD Ryzen 5 5600X) can feed frames fast enough, but the GPU begins to struggle as resolution increases.

The limiting component is unambiguously the GPU at 4K. The data shows a 4K Ultra score of 69.2 FPS versus 4K Low at 165.3 FPS — a 58.1% performance swing purely from settings, which is far larger than any CPU-side variation could produce. At 1080p, the gap between Low (364.2) and Ultra (156.9) is 57.0%, showing that even at lower resolutions, the RTX 4070 Ti's shading units and memory bandwidth dictate the ceiling.

GPU Role

The NVIDIA GeForce RTX 4070 Ti brings 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. In a horror game like Downfall, which relies on dense texture work and dynamic lighting, this bandwidth is the key enabler for the 4K High result of 111.6 FPS. The GPU's 80 ROPs and 240 TMUs handle pixel and texture throughput at rates that keep the 4K Medium result at 132.1 FPS.

Clocks matter here. The base clock of 2310 MHz boosts to 2610 MHz, and the memory runs at 1313 MHz (21 Gbps effective). These figures explain why the card sustains high averages even under load — the Ada Lovelace architecture (AD104 chip, 5 nm process) has 7680 shading units and 60 RT cores, which are directly relevant to Downfall's use of ray-traced reflections and shadows in its horror environments. The 40.09 TFLOPS FP32 throughput is the raw compute that drives the 4K Ultra result of 69.2 FPS, which is the lowest measured score but still respectable for a 2016 title.

The GPU's 285 W TDP and 600 W suggested PSU indicate a power-hungry part, but the benchmark data shows no thermal throttling artifacts — the FPS averages are stable across runs. The 12 GB VRAM is sufficient for Downfall at all tested settings; there is no evidence of memory capacity limiting performance, as even 4K Ultra's 69.2 FPS is well above what a VRAM-starved card would produce. The card's 85th percentile ranking among all GPUs (avg benchmark score 44900) corroborates its position as a high-end part that handles this game's demands with margin to spare.

How This Combo Ranks

In the database of tested combinations, this pairing of AMD Ryzen 5 5600X and NVIDIA GeForce RTX 4070 Ti ranks 197th out of 1741 combos in Downfall. That places it in the top 11.3% of all tested systems — a strong result that reflects the balanced nature of the two components. The CPU alone sits at the 78th percentile among all processors (avg benchmark score 20680), while the GPU is at the 85th percentile, so the combo outperforms what either component's individual percentile might suggest.

The ranking is particularly impressive given the CPU's nearest rivals. The Ryzen 5 5600X scores 20680 on average, which is within 0.5% of the Intel Core i5-12490F (20794) and 0.3% of the Intel Core i7-10700 (20746). This means the CPU is not holding the GPU back — the 4070 Ti is free to deliver its full potential, which is why the combo lands in the top 200 despite the CPU being a mid-range part. The GPU's nearest rival, the RTX 5090 Mobile (45152 avg score, -0.6% delta), shows that the desktop 4070 Ti is competitive with mobile flagship parts, further explaining the high combo rank.

The 197th rank out of 1741 combos is a verdict on synergy: this CPU-GPU pairing extracts nearly all the performance the GPU can offer in Downfall. Systems ranked higher likely pair the 4070 Ti with faster CPUs, but the data shows diminishing returns — the 5600X's 6 cores and 12 threads are sufficient to avoid bottlenecking at the frame rates measured.

Measured FPS Breakdown

1080p: The lowest resolution tested shows the system's full potential. Low settings produce 364.2 FPS, Medium 300.1 FPS, High 244.3 FPS, and Ultra 156.9 FPS. The step from High to Ultra is a 35.8% drop (244.3 to 156.9), which is the largest single-preset penalty at this resolution. This suggests Ultra enables effects that disproportionately tax the GPU.

1440p: Medium settings deliver 213.6 FPS, High 175.1 FPS, and Low 264.8 FPS. Ultra drops to 110.9 FPS — a 36.7% reduction from High. The 1440p results are all comfortably above 100 FPS, making this resolution the sweet spot for high refresh rate displays.

4K: High settings yield 111.6 FPS, Medium 132.1 FPS, Low 165.3 FPS, and Ultra 69.2 FPS. The Ultra result is the only measured value below 100 FPS across all configurations, and it represents a 37.9% drop from High. This is the only resolution where the card's limits are clearly visible.

Across all resolutions, the pattern is consistent: Low to Medium costs about 20% performance, Medium to High another 20%, and High to Ultra a further 35-38%. The 4K Ultra result of 69.2 FPS is the only figure that approaches the edge of playability for a horror game requiring precise timing.

Settings Recommendations

The data indicates that High settings provide the best balance of visual fidelity and performance across all resolutions. At 1080p, High yields 244.3 FPS — more than enough for any display, and only 35.8% below Ultra while avoiding the heaviest effects. At 1440p, High's 175.1 FPS is ideal for 144 Hz monitors, and at 4K, High's 111.6 FPS remains smooth.

For players prioritizing frame rate above all else, Medium settings are the next best choice. The 1440p Medium result of 213.6 FPS and 1080p Medium of 300.1 FPS are both excellent, and even 4K Medium at 132.1 FPS is far above typical display refresh rates. Low settings are only recommended for competitive play or extremely high refresh rate displays (360 Hz+), where the 1080p Low figure of 364.2 FPS becomes relevant.

Ultra settings are not recommended. The 4K Ultra result of 69.2 FPS is the only measured value below 100 FPS, and the 35-38% performance penalty over High does not justify the visual gains in a horror title where smooth motion is critical for atmosphere. At 1080p, Ultra's 156.9 FPS is playable, but the drop from High is disproportionate to the quality improvement. The verdict: High is the optimal preset for this combo in Downfall.

CPU Role

The AMD Ryzen 5 5600X contributes 6 cores, 12 threads, and clock speeds of 3.70 GHz base and 4.60 GHz boost. In Downfall, which is primarily a GPU-bound title at high resolutions, the CPU's role is to keep frame times consistent. The 32 MB L3 cache and 51.2 GB/s memory bandwidth on DDR4 are sufficient to feed the GPU's data demands without stutter.

The CPU's benchmark scores show strong single-thread performance: 2622 in Cinebench R23 single-core and 917 in 3DMark single-thread. These are the relevant metrics for a game engine that relies on a few main threads for game logic and rendering commands. The multi-thread scores (18578 Cinebench R23 multi-core, 5588 3DMark max threads) indicate that the 12 threads handle background tasks without competing with the main game threads.

The 5600X's 65 W TDP and Zen 3 architecture (7 nm, TSMC) make it a power-efficient choice, but the data shows it does not bottleneck the RTX 4070 Ti in Downfall. The 1080p Low result of 364.2 FPS is a clear indicator: even at extreme frame rates, the CPU keeps up. The nearest rival data — the 5600X is within 0.5% of the i5-12490F and i7-10700 — confirms that this CPU is in the right performance tier for this GPU pairing.

FAQ

Q: Is this combo capable of 4K gaming in Downfall?

A: Yes, but only at lower settings. The 4K High result is 111.6 FPS, and 4K Medium is 132.1 FPS, while 4K Ultra drops to 69.2 FPS. For smooth 4K play, High settings are recommended.

Q: Which resolution gives the best experience?

A: 1440p High provides 175.1 FPS, which is well above 144 Hz refresh rates. 1080p High delivers 244.3 FPS for 240 Hz displays. 4K High at 111.6 FPS is also viable for 60-120 Hz screens.

Q: How does the CPU compare to its closest rivals?

A: The Ryzen 5 5600X scores 20680 average, which is 0.3% behind the Intel Core i7-10700 (20746) and 0.5% behind the Intel Core i5-12490F (20794). The differences are negligible for gaming.

Q: Does the GPU bottleneck the system at any resolution?

A: The data shows GPU limiting at 4K Ultra, where the 69.2 FPS result is significantly lower than other settings. At 1080p and 1440p, the system is not bottlenecked — the 5600X keeps up with the GPU's output.

Q: What is the best settings preset for this combo?

A: High settings offer the best balance. At 1440p, High gives 175.1 FPS versus 110.9 FPS for Ultra, a 36.7% gain. At 4K, High gives 111.6 FPS versus 69.2 FPS for Ultra, a 61.3% improvement.

Q: How does this combo rank among all tested systems?

A: It ranks 197th out of 1741 combos, placing it in the top 11.3%. The GPU's 85th percentile and CPU's 78th percentile combine to produce a system that exceeds expectations for its component tier.