Downfall

The AMD Ryzen 5 5600X paired with the AMD Radeon RX 7600 delivers a broadly playable experience in Downfall, but the data reveals a system that is heavily constrained by the GPU at higher resolutions and settings. This combination ranks 1160th out of 1741 tested combos, placing it in the lower third of configurations evaluated for this title. The measured frame rates show a clear pattern: the RX 7600 is the dominant factor in determining performance, while the Ryzen 5 5600X provides sufficient headroom to avoid becoming a bottleneck until frame rates climb well past 130 FPS.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, indicating a classic GPU-bound scenario. At High settings, the average frame rate falls from 131.2 FPS at 1920x1080 to 92.7 FPS at 2560x1440, a reduction of 38.5 FPS, and then to 60.7 FPS at 3840x2160, a further drop of 32.0 FPS. This pattern shows that the RX 7600’s rendering throughput is the limiting component, as the workload scales directly with pixel count.

The scaling becomes even more pronounced when examining the Low settings preset. Here, the average frame rate at 1080p is 194.7 FPS, which drops to 136.7 FPS at 1440p and then to 87.2 FPS at 4K. The 4K result is less than half of the 1080p figure, demonstrating that the GPU’s fillrate and memory bandwidth are overwhelmed when pixel count quadruples. This is not a case of the CPU holding back performance; the Ryzen 5 5600X, with its 6 cores and 12 threads, is capable of feeding the GPU at lower resolutions, as evidenced by the high frame rates at 1080p.

The most demanding preset, Ultra, shows the harshest scaling. From 80.9 FPS at 1080p, the average drops to 55.4 FPS at 1440p and then plummets to 35.1 FPS at 4K. This 45.8 FPS difference between 1080p and 4K underscores that the RX 7600’s 8 GB of GDDR6 memory and 128-bit bus are insufficient for the highest visual fidelity at 4K. The data suggests that for a smooth 60 FPS experience at 4K, users would need to rely on the High preset, which barely achieves that mark at 60.7 FPS, or step down to Medium for a more comfortable margin.

GPU Role

The AMD Radeon RX 7600’s specifications directly explain the observed performance characteristics. With a base clock of 1720 MHz and a boost clock of 2655 MHz, the card has a substantial clock speed advantage over older architectures, but its memory configuration is a limiting factor. The 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 288.0 GB/s, which is adequate for 1080p and 1440p gaming but becomes a bottleneck at 4K, particularly with higher texture detail levels.

The GPU’s 2048 shading units and 64 ROPs are tasked with the pixel processing in Downfall, a horror title that likely relies on heavy post-processing effects and dynamic lighting. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are the theoretical limits that the measured frame rates approach at 4K. The gap between the Low preset (87.2 FPS at 4K) and the Ultra preset (35.1 FPS at 4K) shows how quickly the shading and texture units become saturated when additional effects are enabled.

Interestingly, the RX 7600’s benchmark scores place it in the 63rd percentile of all GPUs, with an average score of 20258. Its nearest rival is the AMD Radeon RX 7600 XT, which scores 20146, a delta of 0.6% — meaning the RX 7600 is actually slightly ahead in this aggregate metric. This indicates that the card is a solid performer in its class, but the 4K Ultra results in Downfall suggest that the game’s specific demands exceed what the card can comfortably deliver. The 32 ray tracing cores are present, but the game’s performance at 4K Ultra implies that these cores are not being leveraged effectively at that resolution, or the rasterization load is simply too high.

FAQ

*Q: What is the maximum average frame rate achievable with this combo in Downfall?*

A: The highest measured average frame rate is 194.7 FPS, achieved at 1920x1080 with the Low settings preset.

Q: Can this system maintain a stable 60 FPS at 4K resolution?

A: Yes, but only with the High preset, which produces an average of 60.7 FPS. The Medium preset yields 72.6 FPS, while the Ultra preset falls below 60 FPS at 35.1 FPS.

Q: How does the GPU compare to its closest rival in aggregate benchmarks?

A: The AMD Radeon RX 7600 has an average benchmark score of 20258, which is 0.6% higher than the AMD Radeon RX 7600 XT’s score of 20146. It also outperforms the NVIDIA GeForce RTX 3070 Mobile by 1.3%.

Q: Does the CPU limit performance at any point in the tested configurations?

A: The data indicates the CPU is not the primary bottleneck. At 1080p Low, the combo reaches 194.7 FPS, and the Ryzen 5 5600X scores 18578 in Cinebench R23 multi-core and 2622 in single-core, suggesting it has ample headroom to keep up with the GPU’s output at these settings.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 136.7 FPS, while the Ultra preset averages 55.4 FPS. This represents a performance drop of 81.3 FPS, or roughly 59%, when moving from the lowest to the highest visual quality.

*Q: How does this combo rank among all tested configurations for Downfall?*

A: The combination of the AMD Ryzen 5 5600X and AMD Radeon RX 7600 ranks 1160th out of 1741 tested combos, placing it in the 66th percentile of all configurations tested for this game.

Measured FPS Breakdown

At 1920x1080, the combination exhibits a wide range of performance depending on settings. The Low preset delivers an average of 194.7 FPS, which is exceptionally high and indicates a CPU-bound situation at this resolution. The Medium preset drops to 158.3 FPS, while the High preset achieves 131.2 FPS. The Ultra preset, which introduces the most demanding effects, still manages an average of 80.9 FPS, making 1080p the only resolution where all settings are comfortably playable on high refresh rate monitors.

Moving to 2560x1440, the GPU begins to show its limits. The Low preset averages 136.7 FPS, which remains excellent for competitive play. The Medium preset drops to 111.5 FPS, and the High preset falls to 92.7 FPS. The Ultra preset is the first to dip below the 60 FPS threshold, averaging just 55.4 FPS. This suggests that for a locked 60 FPS experience at 1440p, users should stick to High settings or lower.

At 3840x2160, the results are more strained. The Low preset averages 87.2 FPS, which is still playable, but the Medium preset drops to 72.6 FPS. The High preset barely maintains a playable average at 60.7 FPS, while the Ultra preset falls to 35.1 FPS, which is not suitable for smooth gameplay. The data shows a clear linear degradation from Low to Ultra at 4K, with no single setting providing a comfortable margin above 60 FPS except for Low.

How This Combo Ranks

In the context of all tested configurations for Downfall, this pairing of the AMD Ryzen 5 5600X and AMD Radeon RX 7600 achieves a rank of 1160 out of 1741 combos. This places it in the lower third of all tested systems, which is consistent with the GPU’s 63rd percentile ranking among all GPUs and the CPU’s 78th percentile among all CPUs. The CPU is clearly the stronger component here, with a performance percentile that is 15 points higher than the GPU.

The CPU’s nearest rivals in aggregate benchmarks include the AMD Ryzen 5 5600GT, which scores 20740 (a 0.3% difference), and the Intel Core i7-10700, which scores 20746 (a 0.3% difference). The RX 7600’s rivals show a similar pattern, with the RX 7600 XT scoring 20146 (0.6% lower) and the Intel Arc B570 scoring 20556 (1.5% higher). These small deltas suggest that the combo’s rank is not due to a weak CPU or GPU in isolation, but rather the combination’s overall balance.

The fact that the combo ranks 1160th out of 1741 combos, despite both components being mid-range performers, indicates that Downfall is a demanding title that favors higher-end hardware. The measured data shows that the RX 7600 is the limiting factor, particularly at 4K Ultra, where it falls to 35.1 FPS. For users with this combo, the optimal experience is found at 1080p or 1440p with High or lower settings, where the system can deliver frame rates well above 60 FPS. The 4K Ultra preset should be avoided unless the user is willing to accept a sub-40 FPS experience.