Downfall

How This Combo Ranks

The AMD Ryzen 5 5600F paired with the NVIDIA GeForce GTX 1070 lands at rank 2420 out of 2928 tested combos in Downfall. That places this configuration in the bottom 18% of all tested pairings, which is a clear signal that this is not a combo built for high-refresh or max-settings horror gaming. The ranking reflects the GPU's age more than the CPU's capability, as the GTX 1070 sits at the 47th percentile among all GPUs, while the Ryzen 5 5600F holds a much stronger 85th percentile among all CPUs. This asymmetry means the graphics card is the limiting factor in most scenarios, and the combo's overall rank is dragged down by that imbalance.

Benchmark results indicate that the CPU is not the bottleneck here. The Ryzen 5 5600F's nearest rivals in synthetic testing include the Intel Core Ultra 5 225 (deltaPct 0), the AMD Ryzen 5 5500X3D (deltaPct -0.2), and the AMD Ryzen AI 7 PRO 450 (deltaPct -0.4). These are all modern processors with similar average scores, confirming that the 5600F is performing at a competitive level. The GPU, by contrast, sits near the AMD FirePro W5000 (deltaPct -0.2) and the NVIDIA Quadro M2000M (deltaPct -0.5), which are professional or older mobile parts. In a game like Downfall, where atmosphere and lighting effects matter, the GTX 1070's dated architecture shows its limits.

GPU Role

The NVIDIA GeForce GTX 1070 is built on the Pascal architecture using the GP104 chip, manufactured on a 16 nm process at TSMC. It carries 8 GB of GDDR5 memory on a 256-bit bus, providing 256.3 GB/s of bandwidth. The memory runs at 2002 MHz (8 Gbps effective), and the core clocks are set at 1506 MHz base with a 1683 MHz boost. These specifications place the card in a specific performance tier that the measured FPS data in Downfall reflects.

With 1920 shading units, 120 TMUs, and 64 ROPs, the GTX 1070 delivers a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s. Its FP32 performance is 6.463 TFLOPS, which was respectable for its launch generation but is now modest. The card draws 150 W TDP and requires a 450 W suggested PSU, with a single 8-pin power connector. It supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, so it can run modern APIs, but the hardware lacks dedicated ray tracing or tensor cores.

In Downfall, the GPU's role is critical because the game's horror atmosphere relies on lighting, shadows, and particle effects. The measured FPS data shows that the GTX 1070 can handle 1080p at medium settings with an average of 128 FPS, but pushing to Ultra drops that to 66 FPS. At 1440p, the card manages 92 FPS on medium but only 47 FPS on Ultra. At 4K, the gap widens dramatically: 57 FPS on medium, 47 FPS on high, and just 29 FPS on ultra. These numbers indicate that the GTX 1070's 8 GB VRAM and 256-bit bus are sufficient for lower resolutions, but the card's compute throughput becomes the limiting factor at higher settings and resolutions.

FAQ

Q: Can this combo run Downfall at 60 FPS in 1080p?

A: Yes, at medium settings the combo averages 128 FPS, and at high settings it averages 105 FPS. Even at ultra settings, it maintains 66 FPS, which is above the 60 FPS threshold.

Q: What is the best resolution for this combo in Downfall?

A: The data shows 1440p at medium settings provides 92 FPS average, and 1440p at high settings provides 75 FPS. This is a good balance between visual quality and frame rate, though 1080p offers higher headroom.

Q: How does the GTX 1070 compare to its nearest rivals in synthetic benchmarks?

A: The GTX 1070 has an average benchmark score of 9780, which is nearly identical to the AMD FirePro W5000 (9803, deltaPct -0.2) and the NVIDIA Quadro M2000M (9832, deltaPct -0.5). It slightly outperforms the NVIDIA Tesla M10 (9724, deltaPct 0.6) and Tesla C2070 (9716, deltaPct 0.7).

Q: Is the Ryzen 5 5600F holding back the GTX 1070 in Downfall?

A: No. The CPU's multithread score of 19236 and single-thread score of 2872 are strong for this pairing. The GPU's percentile rank of 47 is much lower than the CPU's 85, indicating the graphics card is the bottleneck in most scenarios.

Q: What are the minimum FPS figures for this combo?

A: The measured data includes minimum FPS only for medium settings: 109 FPS at 1080p, 78 FPS at 1440p, and 48 FPS at 4K. Other settings do not have min FPS recorded in the data.

Q: Does this combo support modern graphics APIs needed for Downfall?

A: Yes, the GTX 1070 supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, which covers the API requirements for the game.

Measured FPS Breakdown

The measured FPS data for Downfall spans three resolutions and four quality settings, providing a comprehensive view of this combo's performance envelope.

At 1920x1080, the lowest resolution tested, the combo delivers strong results. Low settings produce an average of 157 FPS, which is excellent for fast-paced horror gameplay. Medium settings yield 128 FPS average with a minimum of 109 FPS and a maximum of 147 FPS. High settings drop to 105 FPS average, while Ultra settings fall to 66 FPS average. This progression shows that the GTX 1070 has ample headroom at 1080p, and even the most demanding settings remain playable.

Moving to 2560x1440, the performance scales down predictably. Low settings average 112 FPS, which is still very smooth. Medium settings average 92 FPS with a minimum of 78 FPS and a maximum of 105 FPS. High settings average 75 FPS, and Ultra settings average 47 FPS. The jump from high to ultra at this resolution costs 28 FPS, which is a significant penalty for the visual upgrade. For players targeting 60 FPS, high settings at 1440p is the sweet spot.

At 3840x2160, the GTX 1070 begins to struggle. Low settings average 70 FPS, which is acceptable. Medium settings average 57 FPS with a minimum of 48 FPS and a maximum of 66 FPS. High settings drop to 47 FPS average, and Ultra settings fall to 29 FPS. The 4K ultra result is barely playable, and the 29 FPS average suggests the card is overwhelmed by the combination of resolution and settings. Players with 4K displays should stick to low or medium settings with this combo.

Resolution Scaling

The FPS drop from 1080p to 4K reveals important information about which component limits performance in Downfall. At low settings, the average FPS goes from 157 at 1080p to 112 at 1440p (a 29% drop) and then to 70 at 4K (a 55% drop from 1080p). At medium settings, the progression is 128 to 92 to 57, showing a similar pattern. At high settings, it goes 105 to 75 to 47. At ultra settings, it goes 66 to 47 to 29.

The scaling pattern indicates that the GPU is the primary bottleneck. When resolution increases, the GPU must render more pixels, and the FPS drops accordingly. The CPU's performance does not change with resolution, so if the CPU were the bottleneck, we would expect FPS to remain relatively flat across resolutions. Instead, the steep drops at 4K confirm that the GTX 1070's compute and memory bandwidth are insufficient for high-resolution rendering in Downfall.

Interestingly, the percentage drop from 1080p to 4K is larger at low settings (55% drop) than at high settings (53% drop) or ultra settings (56% drop). This is because at lower settings, the GPU is less constrained by shading work, so the resolution increase has a more pronounced effect. At higher settings, the GPU is already working hard at 1080p, so the additional resolution burden is relatively smaller in percentage terms. This behavior is typical of a GPU-bound scenario.

The data suggests that if a player wants to use this combo at 4K, they should expect to compromise heavily on settings. The 70 FPS at low settings is the only playable 4K option, and even that requires turning down many visual features. At 1440p, the combo offers a better balance, with medium settings providing 92 FPS and high settings providing 75 FPS. At 1080p, the combo is capable of high refresh rates, making it suitable for competitive play.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture (codenamed Vermeer), manufactured on a 7 nm process at TSMC. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. The CPU supports DDR4 memory in dual-channel mode, providing 51.2 GB/s of memory bandwidth, and it uses the AMD Socket AM4 with PCIe Gen 4 (20 lanes from the CPU). The cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of shared L3 cache.

In Downfall, the CPU's role is to handle game logic, physics, and AI, while the GPU renders the scene. The measured FPS data shows that the CPU is not a limiting factor at any resolution or setting tested. At 1080p low settings, the combo achieves 157 FPS, which is a high frame rate that would stress many CPUs, yet the Ryzen 5 5600F keeps up. At 1080p ultra, the FPS drops to 66, but this is clearly due to the GPU's limitations, not the CPU.

The CPU's benchmark scores support this conclusion. Its multithread score of 19236 and single-thread score of 2872 are strong for a 6-core processor. The passmark physics score of 1043 indicates good gaming performance, and the floating point math score of 34548 shows solid computational throughput. The CPU's percentile rank of 85 among all CPUs means it outperforms the vast majority of processors on the market, and its nearest rivals in synthetic testing are all modern chips with similar scores.

The 6-core, 12-thread configuration is well-suited for gaming, as most titles use only a few threads. Downfall, being a horror game released in 2016, likely does not have heavy multi-threading requirements, so the 5600F's single-thread performance is more important than its multi-thread capabilities. The boost clock of 4.00 GHz ensures responsive gameplay, and the 32 MB L3 cache helps with memory latency, which can impact frame pacing in CPU-bound scenarios.

Overall, the Ryzen 5 5600F provides more than enough processing power for this GPU. Players who upgrade the GPU in the future will find that the CPU can support a much faster graphics card without becoming a bottleneck. The data shows that this combo's performance is constrained by the GTX 1070, not the Ryzen 5 5600F, and that the CPU has headroom for future upgrades.