Doom

The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 4070 combination delivers exceptional performance in Doom, ranking in the top quarter of all tested configurations and providing high refresh rate gameplay across all resolution tiers. The data shows that this pairing is particularly effective at 2560x1440, where it achieves an average of 150 FPS on High settings, and remains highly capable even at 3840x2160. The benchmark results indicate a system that can comfortably handle the game’s demanding Vulkan-based engine, with the CPU’s large cache and the GPU’s substantial memory bandwidth working in concert to produce consistently high frame rates.

FAQ

Q: What is the overall performance ranking of this CPU and GPU combination in Doom?

A: This combo ranks 712th out of 2930 tested combinations, placing it in the top 24.3% of all systems tested for this game. This indicates a strong, above-average configuration that should provide a smooth experience in most scenarios.

Q: How does the AMD Ryzen 5 5500X3D compare to its closest rivals in synthetic benchmarks?

A: The CPU has an average benchmark score of 37018, which is 0.2% higher than the AMD Ryzen 5 5600F and the Intel Core Ultra 5 225, and 0.2% lower than the AMD Ryzen AI 7 PRO 450. It is also 0.3% faster than the Intel Core i9-12900T. These deltas are minimal, indicating performance parity with its direct competitors.

Q: What is the performance context of the NVIDIA GeForce RTX 4070 relative to other GPUs?

A: The GPU holds an 81st percentile ranking among all GPUs, with an average benchmark score of 37648. It scores 0.1% higher than the NVIDIA Tesla P4, 0.4% higher than the AMD Radeon RX Vega 56, 1.3% lower than the NVIDIA GeForce RTX 4080 Mobile, and 1.3% higher than the AMD Radeon PRO W6400.

Q: What is the difference in average frame rate between Low and Ultra settings at 1920x1080?

A: At 1920x1080, the average frame rate drops from 306 FPS on Low settings to 189 FPS on Ultra settings. This represents a 117 FPS difference, or a 38.2% decrease in performance when moving from the lowest to the highest preset.

Q: Does the system maintain playable frame rates at 4K resolution?

A: Yes, the data shows the system is capable of 4K gaming. At 3840x2160, it achieves an average of 81 FPS on High settings, 96 FPS on Medium, and 66 FPS on Ultra. Even the most demanding setting remains well above the standard 60 FPS threshold.

Q: What are the minimum frame rates recorded for the Medium preset at different resolutions?

A: The measured minimum FPS for the Medium preset is 81 at 3840x2160, 150 at 2560x1440, and 232 at 1920x1080. These minimums show that the system maintains a high floor of performance, avoiding significant frame drops even during intense scenes.

GPU Role

The NVIDIA GeForce RTX 4070 is the primary driver of visual fidelity in this configuration. Its 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which is crucial for feeding the high-resolution textures and complex geometry in Doom. The data shows that the GPU’s capabilities scale predictably with resolution; at 3840x2160, the average frame rate on High settings is 81 FPS, which is nearly half the 150 FPS achieved at 2560x1440 on the same preset, illustrating the increased memory and compute load at 4K.

The GPU’s clock speeds, with a base of 1920 MHz and a boost of 2475 MHz, are indicative of its high compute throughput. This is reflected in the benchmark scores, where the GPU achieves a Passmark G3D score of 26927. This raw power translates directly to game performance; the difference between Low and High settings at 2560x1440 is 53 FPS (203 vs 150), showing that the GPU has enough headroom to handle significant increases in shading and texture work without a catastrophic drop in frame rate. The 29.15 TFLOPS of FP32 performance is a key metric for understanding its capability in this fast-paced FPS, where particle effects and dynamic lighting are constant.

The GPU’s memory configuration becomes a more significant factor at higher resolutions. At 3840x2160, the average frame rate on Ultra is 66 FPS, a 31.3% decrease from the High preset’s 81 FPS. This performance scaling suggests that the 12 GB frame buffer is being utilized heavily, and the bandwidth is a limiting factor at the highest settings. However, the system still delivers a playable experience, indicating that the RTX 4070 is well-matched to the demands of Doom at 4K. The GPU’s 81st percentile ranking among all GPUs confirms that it is a high-end part, and the data suggests it can handle this game’s most demanding configurations.

CPU Role

The AMD Ryzen 5 5500X3D, with its 6 cores and 12 threads based on the Zen 3 architecture, provides a solid foundation for game logic and physics. Its base clock of 3.00 GHz and boost clock of 4.00 GHz are standard for the series, but the key differentiator is the 96 MB of shared L3 cache. This large cache is instrumental in Doom, a game known for its arena-based combat with many enemies and objects, as it allows the CPU to store more of the game’s working set on-die, reducing latency and improving frame pacing. The CPU’s Passmark single-thread score of 2941 and multithread score of 20363 show a balanced performance profile.

The CPU’s performance relative to its nearest rivals is effectively a tie, with its average score of 37018 differing by less than 0.3% from the AMD Ryzen 5 5600F, Intel Core Ultra 5 225, and AMD Ryzen AI 7 PRO 450. This suggests that the 5500X3D is not a bottleneck in this system, as the frame rates are likely more dependent on the GPU’s capabilities. The 6-core, 12-thread configuration is sufficient for the game’s threading model, and the high L3 cache helps to maintain consistent performance in complex scenes. The CPU’s 85th percentile ranking among all CPUs indicates it is a strong performer in its own right.

The data shows that the CPU is not a limiting factor in this pairing. For example, at 1920x1080, the average frame rate scales from 306 FPS on Low to 231 FPS on High, a difference of 75 FPS. If the CPU were a bottleneck, this gap would be smaller, as the GPU would be waiting on the CPU to send draw calls. The fact that the frame rate scales significantly with GPU load suggests the CPU is keeping up with the GPU’s demands. The DDR4 memory support and dual-channel bus with 51.2 GB/s bandwidth are adequate for feeding the CPU’s cores, ensuring that game data is readily available.

Settings Recommendations

For the best balance of visual quality and performance, the High preset at 2560x1440 is the standout choice. The data shows an average of 150 FPS, which is well above the 144 Hz refresh rate of many modern monitors, and it provides a significant visual upgrade over the Low preset’s 203 FPS. At this setting, the system has enough headroom to handle intense combat scenarios without dropping below 150 FPS, based on the minimum FPS recorded for the Medium preset at this resolution. This makes High at 1440p the optimal configuration for a high-refresh-rate experience.

At 1920x1080, the High preset is also excellent, with an average of 231 FPS. This is a 42 FPS increase over the Ultra preset’s 189 FPS, with a relatively minor visual sacrifice. For competitive play where maximum frame rates are paramount, the Low preset at 1080p delivers 306 FPS, but this comes at the cost of visual fidelity. The Medium preset at 1080p, with an average of 273 FPS and a minimum of 232 FPS, offers a strong middle ground for players who want high frame rates without the lowest textures.

For 4K gaming at 3840x2160, the High preset is the most sensible choice. It delivers an average of 81 FPS, which is a 15 FPS improvement over the Ultra preset’s 66 FPS. The Medium preset provides 96 FPS, but the jump to High is preferable for visual quality, as the game’s lighting and texture details are significantly improved. The Ultra preset, while playable, dips to 66 FPS, which is closer to the 60 FPS threshold and may not be stable enough for all users. Therefore, High at 4K offers the best combination of visual fidelity and performance headroom.

How This Combo Ranks

The combination of the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 4070 ranks 712th out of 2930 tested combinations in Doom. This places it in the top 24.3% of all systems, which is a strong result considering the wide range of hardware configurations that are likely tested, including more expensive CPUs and GPUs. This ranking suggests that the pairing is well-balanced for this specific game, punching above its weight class. The data shows that the system is not just capable, but is a high-performing configuration that will provide a premium experience.

The ranking is particularly impressive given that neither component is the absolute top-of-the-line in its respective category. The CPU, while having a large cache, is a 6-core part, and the GPU, while powerful, is not the flagship of its generation. Yet, the combination of the CPU’s 96 MB L3 cache and the GPU’s 504.2 GB/s of memory bandwidth appears to be a synergistic match for Doom’s engine. The 712th rank out of 2930 indicates that this combo outperforms a significant majority of other tested systems, many of which may feature higher-core-count CPUs or higher-tier GPUs that do not scale as well in this specific game.

The benchmark results suggest that this is a configuration that prioritizes frame rate consistency and high averages. The minimum FPS values recorded for the Medium preset—81 at 4K, 150 at 1440p, and 232 at 1080p—are all exceptionally high, indicating that the system avoids severe frame dips. This consistency is often more important than raw peak frame rates, and it contributes to the strong overall ranking. For a game like Doom, which requires fast reactions and smooth camera movement, this level of performance is ideal.

Measured FPS Breakdown

At 1920x1080, the system delivers exceptional performance across all presets. The Low preset achieves an average of 306 FPS, the Medium preset averages 273 FPS with a minimum of 232 and a maximum of 314, and the High preset averages 231 FPS. The Ultra preset is the most demanding, with an average of 189 FPS. The scaling from Low to Ultra shows a 117 FPS drop, but even the lowest average is more than sufficient for a high-refresh-rate display.

Moving to 2560x1440, the performance remains very high. The Low preset averages 203 FPS, the Medium preset averages 177 FPS with a minimum of 150 and a maximum of 204, and the High preset averages 150 FPS. The Ultra preset averages 122 FPS. The transition from 1080p to 1440p results in a 24.4% decrease in frame rate on the Low preset (306 to 203 FPS), which is a reasonable cost for the increased resolution and pixel count.

At 3840x2160, the system shows its limits but remains playable. The Low preset averages 110 FPS, the Medium preset averages 96 FPS with a minimum of 81 and a maximum of 110, and the High preset averages 81 FPS. The Ultra preset is the most demanding, with an average of 66 FPS. The gap between Low and Ultra at 4K is 44 FPS, which is a 40% reduction. The minimum FPS of 81 on the Medium preset suggests that even at 4K, the system maintains a high level of performance, making it a viable option for gamers who prioritize resolution over maximum frame rates.