Cyberpunk 2077

Cyberpunk 2077

AVERAGE FPS
26
limited

This combination may struggle with this title, averaging 26 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 13 18 24
1440p QHD 19 20 27 37
1080p Full HD 25 27 36 49

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 24
3840x2160 Medium 18
3840x2160 Ultra 13
3840x2160 High 13
2560x1440 Low 37
2560x1440 Medium 27
2560x1440 High 20
2560x1440 Ultra 19
1920x1080 Low 49
1920x1080 Medium 36
1920x1080 High 27
1920x1080 Ultra 25

Cyberpunk 2077 with Intel Core i5-14600K + Intel Arc B390, In-Depth Analysis

Cyberpunk 2077 presents an extreme challenge for the Intel Core i5-14600K paired with the Intel Arc B390. The measured frame rates across all resolutions indicate that this combination is firmly in entry-level territory for this specific title, with performance that will require significant compromises in visual fidelity to achieve playable frame rates. This analysis breaks down the measured data to explain exactly where the bottleneck lies and what settings offer the best path forward.

Resolution Scaling

The frame rate data reveals a steep and consistent penalty as resolution increases, clearly pointing to the Intel Arc B390 as the primary limiting factor. At 1920x1080 with Low settings, the combo achieves an average of 49 FPS. Moving to 2560x1440 at the same settings drops the average to 37 FPS, a reduction of 12 FPS. At 3840x2160, the average falls further to 24 FPS, demonstrating a linear relationship where each resolution step costs roughly a quarter of the previous performance.

The scaling pattern holds across all quality presets. At High settings, the average frame rate drops from 27 FPS at 1080p to 20 FPS at 1440p, and finally to 13 FPS at 4K. The Ultra preset follows a similar trajectory, falling from 25 FPS at 1080p to 19 FPS at 1440p and 13 FPS at 4K. This consistent drop-off—roughly 26% from 1080p to 1440p and another 35% from 1440p to 4K—is characteristic of a GPU-bound scenario where pixel throughput becomes the dominant constraint.

The data suggests that the Intel Core i5-14600K is not the limiting factor in this equation. The CPU’s benchmark scores, including a Cinebench R23 multi-core score of 24491 and a single-core score of 2064, place it in the 90th percentile of all CPUs. Such headroom means the processor is unlikely to be the cause of these low frame rates. Instead, the Arc B390’s modest 3DMark Steel Nomad DX12 score of 1482, which places it in the 9th percentile of all GPUs, aligns perfectly with the observed performance ceiling.

When interpreting the FPS drop from 1080p to 4K, it is useful to compare the Low preset figures. The jump from 49 FPS at 1080p to 24 FPS at 4K represents a 51% reduction. This is a substantial loss, but it is not as severe as the drop seen on the High preset, which loses 52% of its performance going from 27 FPS to 13 FPS. The relative consistency of these percentage losses across presets reinforces that the GPU’s pixel processing capability, rather than any CPU-side bottleneck, is the decisive factor. For users targeting 4K, the data shows that even the lowest settings cannot maintain a playable 30 FPS average, capping out at 24 FPS.

Settings Recommendations

Given the measured results, the choice of settings is a trade-off between visual quality and frame rate, with no preset offering both high fidelity and smooth performance. The data shows that the Low preset provides the only playable experience at 1080p, with a 49 FPS average. This is the only configuration across all tested resolutions and presets that exceeds the 30 FPS threshold commonly considered the minimum for playable action RPGs.

At 1080p, the Medium preset averages 36 FPS with a minimum of 31 FPS and a maximum of 42 FPS. This is a respectable result and represents the best balance between visual quality and performance for this combo. The min FPS of 31 indicates that the frame rate stays above the 30 FPS line even in demanding scenes, making it a viable option for players who want some graphical improvements over Low. The High preset at 1080p drops to 27 FPS, which is below the smoothness threshold, while Ultra falls to 25 FPS. These presets are difficult to recommend for consistent gameplay.

At 1440p, the situation worsens. The Low preset delivers 37 FPS, which is playable but requires accepting the most minimal visual settings. The Medium preset at 1440p averages 27 FPS, with a min of 23 FPS, which will result in noticeable stuttering during intense action sequences. High and Ultra at 1440p produce 20 FPS and 19 FPS respectively, making them impractical for active gameplay. The data suggests that 1440p is only feasible with the Low preset, and even then, the experience is marginal.

At 4K, no preset achieves a playable frame rate. The Low preset’s 24 FPS average is the best result, but it still falls short of the 30 FPS target. Medium averages 18 FPS, while High and Ultra both sit at 13 FPS. These numbers indicate that 4K gaming is not viable with this combination, regardless of settings. The recommendation based on this data is clear: for a playable experience, users should run the game at 1080p with the Medium preset, accepting the 36 FPS average for a significant visual upgrade over Low. If frame rate is paramount, the Low preset at 1080p is the only option that approaches a smooth experience.

GPU Role

The Intel Arc B390 is decidedly the bottleneck in this system for Cyberpunk 2077. Its hardware specifications, while modern, do not translate into competitive gaming performance in this title. The GPU features 1536 shading units, 48 texture mapping units, and 24 raster output pipelines, with a boost clock of 2500 MHz. It also includes 12 ray tracing cores, though the measured data suggests these are of limited utility given the overall performance level.

The GPU’s memory configuration is notable for its absence of dedicated VRAM. The Arc B390 uses "System Shared" memory, with bandwidth listed as "System Dependent." This is a critical limitation for a demanding game like Cyberpunk 2077, which is known for high memory usage. The reliance on shared system memory, which is dependent on the CPU’s dual-channel DDR4 or DDR5 configuration, likely contributes to the low frame rates, particularly at higher resolutions where memory bandwidth demands increase.

The GPU’s compute capabilities are modest. It offers 7.680 TFLOPS of FP32 performance and a pixel rate of 60.00 GPixel/s. The 3DMark Steel Nomad DX12 score of 1482 places it in the 9th percentile of all GPUs, with its nearest rivals being the NVIDIA GeForce GT 520MX (scoring 1463, a 1.3% difference) and the NVIDIA GeForce 800M (scoring 1460, a 1.5% difference). These comparisons underscore the Arc B390’s position at the very bottom of the performance spectrum, alongside legacy mobile chips from over a decade ago.

The frame rate data corroborates this. At 1080p Low, the 49 FPS average is a result of the GPU being pushed to its limits. The fact that the Ultra preset at 1080p only reduces the frame rate to 25 FPS, compared to the Low preset’s 49 FPS, shows that the GPU is not scaling well with increased graphical load. This is not a case of a CPU bottleneck preventing the GPU from reaching its potential; rather, the GPU is simply unable to process the increased pixel and shader workload efficiently. For users, this means the Arc B390 is unsuitable for Cyberpunk 2077 at any resolution above 1080p, and even at 1080p, it requires low-to-medium settings to remain playable.

FAQ

Q: Can this combo run Cyberpunk 2077 at 4K?

A: No. The measured data shows that at 3840x2160, the best average frame rate is 24 FPS on the Low preset, which is below the 30 FPS threshold for playability. The High and Ultra presets both average 13 FPS at this resolution.

Q: What is the best settings preset for this system?

A: Based on the measured FPS, the Medium preset at 1920x1080 offers the best balance, with an average of 36 FPS and a minimum of 31 FPS. This is the only preset above Low that maintains a minimum frame rate above 30 FPS.

Q: Is the Intel Core i5-14600K or the Intel Arc B390 the bottleneck?

A: The GPU is the bottleneck. The Arc B390’s 3DMark Steel Nomad score of 1482 is in the 9th percentile of all GPUs, while the CPU’s Cinebench R23 multi-core score of 24491 places it in the 90th percentile of all CPUs. The frame rate scaling with resolution is consistent with a GPU-limited scenario.

Q: How does the Arc B390 compare to its nearest rivals in benchmarks?

A: The Arc B390 scores 1482 in 3DMark Steel Nomad DX12. It is 1.3% ahead of the NVIDIA GeForce GT 520MX (score 1463) and 2.7% ahead of the NVIDIA GeForce GT 710 (score 1443). These are the closest competitors in the data.

Q: Does the game support ray tracing on this GPU?

A: The GPU has 12 ray tracing cores, but the measured data does not include any ray tracing benchmarks. Given the low frame rates in standard rasterization tests, enabling ray tracing would likely result in even lower performance.

Q: What is the performance at 1080p with the Ultra preset?

A: The Ultra preset at 1920x1080 averages 25 FPS. This is below the 30 FPS playability threshold and is not recommended for smooth gameplay.

How This Combo Ranks

The combination of the Intel Core i5-14600K and the Intel Arc B390 ranks 2576 out of 2920 tested combos for Cyberpunk 2077. This places it in the bottom 12% of all configurations tested, confirming that it is a low-performance pairing for this specific game. The rank is heavily influenced by the GPU’s poor showing, as the CPU is a high-end part.

To contextualize the CPU’s contribution, the Core i5-14600K’s average benchmark score is 48618, with a 90th percentile ranking. Its nearest rivals include the Intel Xeon Gold 5318H (scoring 48698, a 0.2% difference) and the AMD EPYC 4345P (scoring 48470, a 0.3% difference). This places the CPU in elite company, indicating it is not the source of the low rank. The GPU, however, with its 9th percentile ranking, drags the overall combo down significantly. The data shows that the GPU’s performance is comparable to mobile GPUs from the early 2010s, which is a poor match for a 2023-era high-end CPU in a demanding 2020 game.

The 2576th rank out of 2920 combos means there are 344 tested combinations that perform worse. This is a small fraction, suggesting that most other CPU-GPU pairings in the database offer better playability in Cyberpunk 2077. For builders, this rank serves as a warning that the Arc B390 is not suitable for this title, even when paired with a powerful processor like the 14600K. The bottleneck is so severe that upgrading the GPU would be the only path to a significantly better experience.

CPU Role

The Intel Core i5-14600K plays a supporting role in this configuration, providing ample processing power that goes largely underutilized in Cyberpunk 2077 due to the GPU bottleneck. The CPU is based on the Raptor Lake architecture and features 14 cores and 20 threads, with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. It has 24 MB of shared L3 cache, which is substantial for gaming workloads.

The CPU’s benchmark results demonstrate its high-end status. It achieves a Cinebench R23 multi-core score of 24491 and a single-core score of 2064. In Geekbench, it scores 16673 multi-core and 2491 single-core. Its average benchmark score of 48618 places it in the 90th percentile of all CPUs. The nearest rivals in terms of average score are the Intel Xeon Gold 5318H (scoring 48698, a -0.2% difference) and the AMD EPYC 4345P (scoring 48470, a 0.3% difference). These are professional-grade server processors, highlighting the 14600K’s strength.

In the context of Cyberpunk 2077, the CPU’s role is to feed the GPU with draw calls and game logic. Given that the frame rates are so low, the CPU is never stressed. Even at 1080p with the Low preset, where the GPU is least burdened, the average FPS is 49. A CPU bottleneck would typically manifest as inconsistent frame times or a hard cap on FPS, but the data here shows a steady decline with increased resolution, which is the signature of a GPU limit. The CPU’s 14 cores and 20 threads are more than sufficient for this game’s threading model, and its high single-core performance ensures that the game’s main thread is not a limiting factor.

The CPU’s memory support for DDR4 and DDR5, with a dual-channel bus, is relevant here. The GPU’s reliance on shared system memory means that the CPU’s memory bandwidth can indirectly affect GPU performance. However, the fact that the system uses a desktop platform with dual-channel memory suggests this is not the primary issue. The core problem remains the GPU’s low compute throughput. For users, this means that the i5-14600K is a future-proof choice; should they upgrade the GPU, the CPU will not hold back performance. In this specific pairing, however, the CPU is waiting on the GPU at every turn.

Hardware Specifications

Intel Core i5-14600K

Cores / Threads 14 / 20
Base Clock 3500 MHz
Boost Clock 5300 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

Intel Arc B390

VRAM System Shared System Shared
Base Clock —
Boost Clock 2500 MHz MHz
TDP 80 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14600K + Intel Arc B390 in Cyberpunk 2077

Resolution Settings Avg FPS
3840x2160 Low 24.0
3840x2160 Medium 18.0
3840x2160 Ultra 13.0
3840x2160 High 13.0
2560x1440 Low 37.0
2560x1440 Medium 27.0
2560x1440 High 20.0
2560x1440 Ultra 19.0
1920x1080 Low 49.0
1920x1080 Medium 36.0
1920x1080 High 27.0
1920x1080 Ultra 25.0

Cyberpunk 2077 with ii5-14600K + Other GPUs

See how Cyberpunk 2077 performs with the same CPU but different graphics cards.

Cyberpunk 2077 with Arc B390 + Other CPUs

See how Cyberpunk 2077 performs with the same GPU but different processors.

Other Games with ii5-14600K + Arc B390

Explore FPS benchmarks for other games using this same hardware combination.