Control

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 5080 delivers a high-refresh-rate experience in Control, though the data reveals distinct scaling behavior across resolutions and settings that points to a balanced system rather than a purely GPU-bound one. This combination achieves a rank of 79 out of 1636 tested combos in this title, placing it firmly in the top tier of configurations. The measured frame rates show that the RTX 5080’s Blackwell architecture, with its 10752 shading units and 16 GB of GDDR7 memory on a 256-bit bus, provides ample throughput, while the 7800X3D’s 96 MB of shared L3 cache and 8-core/16-thread Zen 4 layout handle the game’s physics and logic demands without becoming a bottleneck at most settings.

Resolution Scaling

The frame rate transition from 1080p to 4K illustrates a classic GPU-bound curve, but with a notable twist at the lower settings. At 1920x1080 with Low settings, the system outputs 251.7 FPS, which drops to 200.2 FPS at 2560x1440 and further to 131.1 FPS at 3840x2160. This represents a 20.5% reduction from 1080p to 1440p and a 34.5% drop from 1440p to 4K, indicating that even at the lowest quality preset, the GPU is still the primary scaling factor, though the CPU’s contribution becomes more visible at 1080p where the frame rate exceeds what many displays can refresh.

At Ultra settings, the scaling is more aggressive. The 142.1 FPS at 1080p falls to 109.5 FPS at 1440p (a 22.9% decline) and then to 73.7 FPS at 4K (a 32.7% decline from 1440p). This steeper drop at higher settings is expected, as the RTX 5080’s 56.28 TFLOPS of FP32 compute and 293.1 GPixel/s pixel rate are pushed harder by the increased shading and texture work. The medium preset shows a similar pattern: 186.7 FPS at 1080p, 138.5 FPS at 1440p, and 92.9 FPS at 4K, with the 4K figure representing a 50.2% reduction from the 1080p baseline.

The data suggests that the limiting component shifts based on resolution and settings. At 1080p Low, the 251.7 FPS result approaches the practical ceiling for the CPU’s single-thread performance, as the 7800X3D’s 959 3DMark single-thread score and 4115 Cinebench R23 single-core score indicate strong per-core capability but not unlimited headroom. By 4K Ultra, the 73.7 FPS figure is clearly GPU-bound, with the RTX 5080’s average benchmark score of 59188 and its 89th percentile ranking among all GPUs confirming it is the dominant factor in that regime. The 20.5% gap between 1080p and 1440p at Low settings, versus the 22.9% gap at Ultra, indicates that the CPU overhead is more pronounced at lower resolutions, but the overall scaling remains smooth and predictable.

FAQ

Q: What is the average frame rate at 4K with Ultra settings?

A: The measured average is 73.7 FPS at 3840x2160 with Ultra settings. This is the lowest result in the dataset, reflecting the maximum load on the RTX 5080’s 10752 shading units and 112 ROPs.

*Q: How does the 7800X3D’s cache configuration affect performance in Control?*

A: The CPU features 64 KB of L1 cache per core, 1 MB of L2 per core, and 96 MB of shared L3 cache. This large L3 pool, combined with the 8-core/16-thread layout, helps maintain consistent frame delivery in physics-heavy scenes, as evidenced by the 251.7 FPS Low-setting result at 1080p, which requires rapid data access for game logic.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 200.2 FPS, while Ultra averages 109.5 FPS. This 90.7 FPS gap highlights the GPU’s workload scaling, as Ultra settings engage additional shading and texture effects that drive the RTX 5080’s 879.3 GTexel/s texture rate.

Q: Does the RTX 5080’s memory bandwidth influence the 4K results?

A: The GPU’s 960.0 GB/s bandwidth, provided by 16 GB of GDDR7 on a 256-bit bus, is sufficient to feed the 83.6 FPS High and 73.7 FPS Ultra results at 4K. The bandwidth is not a limiting factor in this dataset, as the frame rates scale consistently with GPU compute load.

Q: How does this combo rank compared to other tested configurations?

A: It ranks 79th out of 1636 combos in Control, placing it in the top 4.8% of all tested systems. This ranking is consistent with the CPU’s 87th percentile and GPU’s 89th percentile performance scores.

Q: What is the impact of the CPU’s boost clock on high-FPS scenarios?

A: The 7800X3D has a base clock of 4.20 GHz and a boost clock of 5.00 GHz. At 1080p Low, the 251.7 FPS result indicates that the boost clock is effectively utilized, as the CPU’s 3DMark max-thread score of 7967 and Cinebench R23 multicore score of 29149 support high sustained throughput.

CPU Role

The AMD Ryzen 7 7800X3D’s contribution to Control is most evident in the lower-resolution and lower-settings scenarios where the GPU is not fully saturated. The CPU’s 8 cores and 16 threads, built on the Zen 4 Raphael architecture with a 5 nm process, provide a solid foundation for the game’s simulation and rendering command processing. The 96 MB of shared L3 cache is a defining feature, as it reduces memory latency for frequently accessed data, which is critical for a fast-paced action game like Control where object interactions and physics calculations occur frequently.

Benchmark data supports this interpretation. The CPU’s 3DMark scores of 7980 for 16 threads and 1887 for 2 threads indicate strong multi-threaded efficiency, while the Cinebench R23 multicore score of 29149 and single-core score of 4115 show balanced capability. In Control, the 1080p Low result of 251.7 FPS is the highest in the dataset, and this figure approaches the practical limit for the CPU’s instruction throughput. The Passmark single-thread score of 3759 and multithread score of 34293 confirm that the CPU can handle both the game’s main thread and background tasks without creating a significant bottleneck.

However, the CPU’s role diminishes as resolution increases. At 4K Ultra, the GPU becomes the clear limiter, as the RTX 5080’s compute resources are stretched by the 3840x2160 pixel count. The 73.7 FPS result at 4K Ultra is 70.7% lower than the 1080p Low result, a scaling pattern that aligns with pure GPU workload. The 7800X3D’s 83.2 GB/s memory bandwidth and DDR5 support ensure that data feeds the GPU efficiently, but the CPU’s impact is largely confined to the 1080p and 1440p Low/Medium settings where frame rates exceed 130 FPS.

The launch MSRP for the CPU is $449, and its production status is Active. The CPU’s percentile ranking of 87 among all CPUs, with a nearest rival delta of only 0.1% against the Intel Core i7-12700F, indicates that it performs near the top of its class, but the Control data shows that this performance translates into tangible FPS gains primarily at lower resolutions. The 5.00 GHz boost clock is particularly relevant for the 251.7 FPS 1080p Low result, as higher clock speeds reduce latency for frame submission, allowing the GPU to stay fed.

Measured FPS Breakdown

At 1920x1080, the RTX 5080 and 7800X3D combination demonstrates its highest frame rates. Low settings produce an average of 251.7 FPS, which is the peak across all measurements in the dataset. Medium settings yield 186.7 FPS, High settings deliver 167 FPS, and Ultra settings drop to 142.1 FPS. The progression from Low to Ultra represents a 43.5% reduction, which is the largest relative gap among all resolutions, underscoring the GPU’s sensitivity to settings at this resolution where the CPU is more capable of keeping pace.

At 2560x1440, the frame rates scale down predictably. Low settings average 200.2 FPS, representing a 20.5% drop from 1080p Low. Medium settings produce 138.5 FPS, a 25.8% reduction from the 1080p Medium result. High settings average 127.9 FPS, while Ultra settings reach 109.5 FPS. The difference between High and Ultra at 1440p is 18.4 FPS, which is a smaller gap than at 1080p (24.9 FPS), suggesting that the GPU’s shading units are becoming more saturated as resolution increases.

At 3840x2160, the frame rates reflect the full load on the RTX 5080. Low settings average 131.1 FPS, which is a 34.5% drop from 1440p Low and a 47.9% drop from 1080p Low. Medium settings average 92.9 FPS, while High settings produce 83.6 FPS. Ultra settings deliver the lowest result in the dataset at 73.7 FPS. The scaling from Medium to Ultra at 4K is a 19.2 FPS reduction, which is proportionally smaller than at lower resolutions, indicating that the GPU is approaching its compute limits and that settings changes have diminishing returns.

The data shows a consistent pattern: the RTX 5080’s 56.28 TFLOPS FP32 throughput and 879.3 GTexel/s texture rate are the primary drivers of frame rate, with the CPU providing sufficient support to avoid major frame drops. The 3DMark Steel Nomad DX12 score of 8637 and Passmark G3D score of 36565 for the GPU align with the measured results, as the 4K Ultra figure of 73.7 FPS is consistent with a GPU that ranks in the 89th percentile. The High settings at 1080p (167 FPS) and 1440p (127.9 FPS) show a 23.4% reduction, which is close to the pixel count increase of 77.8% from 1080p to 1440p, but the frame rate drop is less than proportional, suggesting that other factors such as CPU overhead and memory bandwidth play a moderating role.

How This Combo Ranks

The combination of the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5080 holds the 79th position out of 1636 tested combos in Control, placing it in the top 4.8% of all configurations. This ranking is a function of both components’ strengths: the CPU’s 87th percentile ranking among all CPUs and the GPU’s 89th percentile ranking among all GPUs contribute to a synergistic pairing that excels in this title. The nearest rival for the CPU is the Intel Core i7-12700F with a delta of 0.1%, indicating that the 7800X3D is statistically tied with that processor in general benchmarks, but the Control results show that the 3D V-Cache design provides a measurable advantage in game-specific scenarios.

For the GPU, the nearest rival is the Intel Arc A570M with a delta of 1.6%, while the AMD Radeon Pro W5500X trails by 2.6%. These deltas are small in synthetic benchmarks, but the RTX 5080’s 16 GB of GDDR7 memory and 960.0 GB/s bandwidth give it a clear edge in Control’s 4K Ultra settings, where the 73.7 FPS result is competitive with higher-tier cards. The combo’s rank of 79 is notably higher than the average rank of a system with this CPU and GPU would suggest, based on their individual percentiles, which implies that Control is particularly well-optimized for the 7800X3D’s large L3 cache and the RTX 5080’s Blackwell architecture.

In practical terms, this ranking means that the combo outperforms the vast majority of tested systems in Control. The 1080p Low result of 251.7 FPS is in the top tier of all measurements, while the 4K Ultra result of 73.7 FPS is still well above the 60 FPS threshold for smooth gameplay. The 1636 total combos include a wide range of CPU and GPU pairings, and the 79th rank indicates that this specific configuration is among the most capable for this title. The data does not include min or max frame rates, so the analysis is based on average FPS, but the consistency of the scaling across resolutions and settings suggests that the combo does not suffer from significant frame pacing issues. The RTX 5080’s 293.1 GPixel/s pixel rate and 112 ROPs are well-matched to the 7800X3D’s 8-core layout, resulting in a balanced system that ranks highly without any single component being a clear weak link.