Control
This combination may struggle with this title, averaging 25 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 16 | 15 | 18 | 26 |
| 1440p QHD | 22 | 21 | 25 | 34 |
| 1080p Full HD | 24 | 28 | 29 | 47 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Control with AMD Ryzen 7 7800X3D + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
Control, the 2019 action-adventure title, presents an extreme stress test for this particular pairing. The data shows a system where a top-tier 2023 processor is paired with an entry-level 2016 graphics card, and the benchmark results are entirely dominated by the latter's limitations. The measured frame rates are consistently low, with the combination ranking 1610th out of 1636 tested combos in this game, placing it in the bottom 2% of all configurations. This is a fascinating case study in hardware bottlenecks, as the CPU's immense power is left largely untapped while the GPU struggles to render the game's demanding physics and particle effects.
Resolution Scaling
The frame rate scaling across resolutions reveals a textbook case of a GPU-bound scenario. When moving from 1920x1080 to 2560x1440 on High settings, the average frame rate drops from 27.6 FPS to 21.4 FPS, a reduction of roughly 22%. The scaling from 1440p to 4K (3840x2160) is even more punishing, with the average FPS plummeting from 21.4 to 14.6, another 32% decrease. This pattern is consistent across all settings presets, indicating that the rendering pipeline is saturated before the CPU can even begin to flex its muscles.
The data suggests that the limiting component is unequivocally the GPU. The NVIDIA GeForce GTX 1050 Ti, with its 4 GB of GDDR5 memory and 128-bit memory bus, is being overwhelmed by the increasing pixel count. The frame rates at 4K are uniformly unplayable, ranging from 26 FPS on Low to 14.6 FPS on High. Even at 1080p, the highest average FPS recorded is 47.4 on Low settings, which is just barely approaching playable territory. The consistent drop with resolution increase is a clear indicator that the graphics card's fill rate and memory bandwidth are the primary constraints, not the CPU's ability to feed it data.
How This Combo Ranks
The combo's overall rank of 1610 out of 1636 in Control is a stark indicator of its performance class. This places it in the bottom 1.6% of all tested combinations, highlighting a severe mismatch between the components. The AMD Ryzen 7 7800X3D is a high-end processor, but its performance is completely neutralized by the GPU's inability to keep pace. The benchmark data shows that this is not a balanced system for this game; it is a system where one component is operating at a fraction of its potential.
This ranking is consistent with the GPU's standalone performance metrics. The GTX 1050 Ti sits at the 30th percentile of all GPUs, with an average benchmark score of 5316. Its nearest rivals are not other desktop graphics cards but rather low-power mobile and entry-level parts like the NVIDIA GeForce 940M and the AMD Radeon R7 240, with score deltas of 0.4% and 0.7% respectively. This places the GPU in a performance tier that is fundamentally unsuited for a modern, graphically intensive title like Control, which explains why the combo performs so poorly despite having one of the strongest gaming CPUs available.
CPU Role
The AMD Ryzen 7 7800X3D is a powerhouse on paper, featuring 8 cores and 16 threads based on the Zen 4 architecture. Its 3D V-Cache, which provides 96 MB of shared L3 cache, is designed to give a significant boost in gaming workloads. The benchmark results for the CPU are exceptional, with a Cinebench R23 multicore score of 29149 and a single-core score of 4115. Its average benchmark score of 31580 places it at the 87th percentile of all CPUs, and it is just 0.1% ahead of the Intel Core i7-12700F in the aggregate rankings.
However, in this specific game, the CPU's role is minimal. The measured FPS data shows no scenario where the CPU could be a limiting factor. At 1080p Low, the GPU produces 47.4 FPS, which is a low enough number to suggest the CPU is waiting idly for the GPU to finish rendering each frame. The processor's massive 3D V-Cache and high boost clock of 5.00 GHz are irrelevant when the graphics card can only push 26 FPS at 4K Low. The data implies that the game is not CPU-bound at any resolution or settings combination tested, making the 7800X3D's capabilities essentially wasted in this configuration.
Measured FPS Breakdown
The measured FPS data paints a clear picture of performance across the board. At 1920x1080, the results are consistently low. Low settings yield an average of 47.4 FPS, which is the only configuration in the entire test suite to approach a playable frame rate. Medium settings drop the average to 29.3 FPS, High settings to 27.6 FPS, and Ultra to 24.2 FPS. The difference between Low and Ultra is significant, but even the best-case scenario is below the 60 FPS target most gamers expect.
Moving to 2560x1440, the performance degrades further. The Low preset produces an average of 34.1 FPS, while Medium, High, and Ultra yield 25.2, 21.4, and 21.5 FPS respectively. The gap between Low and the other presets widens, indicating that the GPU's memory bandwidth is becoming a critical constraint as the resolution increases. At 3840x2160, the results are uniformly unplayable. The Low preset averages 26 FPS, but Medium drops to 18.1 FPS, Ultra to 15.7 FPS, and High to 14.6 FPS. The data shows a clear pattern: the more pixels the GPU has to fill, the more dramatically its performance collapses.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is the clear bottleneck. Its specifications are modest by modern standards: 768 shading units, 48 texture mapping units, and 32 ROPs. It operates at a base clock of 1291 MHz and a boost clock of 1392 MHz, with 4 GB of GDDR5 memory on a 128-bit bus providing 112.1 GB/s of bandwidth. Its compute power is rated at 2.138 TFLOPS for FP32 operations, which is a very low figure for a game released in 2019.
The GPU's performance percentile of 30% and its average benchmark score of 5316 are reflective of its entry-level status. Its nearest rival, the NVIDIA GeForce 930A, has a score of 5317, a delta of 0%, showing that the 1050 Ti is barely distinguishable from a much older, lower-tier mobile part. The data in Control confirms this. The game's vast environments, dynamic lighting, and physics-based destruction require a level of fill rate and memory bandwidth that the 1050 Ti simply cannot provide. The 4 GB VRAM is also likely a limiting factor, as the game's textures at higher settings may exceed this capacity, causing stuttering and reduced performance.
FAQ
Q: Why is the performance so low even at 1080p?
A: The benchmark data shows the GPU is the limiting factor. With an average score in the 30th percentile of all GPUs, the NVIDIA GeForce GTX 1050 Ti lacks the raw compute power (2.138 TFLOPS) and memory bandwidth (112.1 GB/s) required to render Control's graphics at high frame rates, even at 1080p.
Q: Is the AMD Ryzen 7 7800X3D a good match for this game?
A: The data indicates it is not. While the CPU is a top performer with a Cinebench R23 multicore score of 29149, the measured FPS shows no CPU bottleneck. The system is GPU-limited in every scenario, meaning the processor's power is not being utilized effectively.
Q: What is the best resolution to play this game with this combo?
A: According to the data, 1920x1080 on Low settings provides the highest average frame rate at 47.4 FPS. All other resolutions and settings combinations result in averages below 35 FPS, making them less suitable for smooth gameplay.
Q: How does this GPU compare to its closest competitors?
A: The GTX 1050 Ti's average benchmark score of 5316 is nearly identical to that of the NVIDIA GeForce 930A, which scores 5317. It is also within 0.7% of the AMD Radeon R7 240, placing it in the same performance class as these entry-level parts.
Q: Will lowering the settings from Ultra to Low provide a significant boost?
A: Yes. At 1920x1080, lowering settings from Ultra to Low increases the average FPS from 24.2 to 47.4, a 96% improvement. A similar trend is seen at 2560x1440, where the average rises from 21.5 FPS on Ultra to 34.1 FPS on Low.
Q: Does the CPU's 3D V-Cache help in this game?
A: The benchmark results do not show any benefit. Despite the 96 MB of shared L3 cache, the measured frame rates are consistently low across all settings and resolutions, indicating that the game's performance is entirely constrained by the GPU, not the CPU's cache or processing capabilities.
Settings Recommendations
Based on the measured data, the only viable configuration for this combo is 1920x1080 with the Low preset, which yields an average of 47.4 FPS. This is the sole measured point that approaches a playable frame rate. While it is still below the 60 FPS threshold, it represents the best possible experience with this hardware.
All other settings presets at 1080p result in averages between 24.2 and 29.3 FPS, which are likely to feel sluggish and unresponsive. The situation is worse at higher resolutions. The 2560x1440 and 3840x2160 measurements are all below 35 FPS, with the 4K results being consistently under 27 FPS. The data suggests that players should avoid these resolutions entirely. The performance gap between Low and Medium settings is substantial, indicating that the Low preset is the only one that effectively reduces the GPU's workload enough to produce a semi-playable experience.
Hardware Specifications
AMD Ryzen 7 7800X3D
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 7800X3D + NVIDIA GeForce GTX 1050 Ti in Control
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 26.0 |
| 3840x2160 | Medium | 18.1 |
| 3840x2160 | Ultra | 15.7 |
| 3840x2160 | High | 14.6 |
| 2560x1440 | Low | 34.1 |
| 2560x1440 | Medium | 25.2 |
| 2560x1440 | Ultra | 21.5 |
| 2560x1440 | High | 21.4 |
| 1920x1080 | Low | 47.4 |
| 1920x1080 | Medium | 29.3 |
| 1920x1080 | High | 27.6 |
| 1920x1080 | Ultra | 24.2 |
Control with Ryzen 7 7800X3D + Other GPUs
See how Control performs with the same CPU but different graphics cards.
Control with GTX 1050 Ti + Other CPUs
See how Control performs with the same GPU but different processors.
Other Games with Ryzen 7 7800X3D + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.