Control

The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 2060 produces a clear pattern in Control: the GPU is the primary constraint at every resolution, but the CPU's strength ensures that frame rates remain consistent and never become the bottleneck. This combination ranks 1345 out of 1636 tested combos, placing it in the lower-middle tier of the database, which aligns with the RTX 2060's position as a capable but not top-tier graphics card.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, confirming that the RTX 2060 is the limiting component. At Low settings, the average frame rate falls from 105.7 FPS at 1920x1080 to 83.9 FPS at 2560x1440, a reduction of approximately 21%, and then to 53.1 FPS at 3840x2160, which is about 50% of the 1080p figure. This scaling pattern is typical for a GPU-bound scenario—the pixel count quadruples from 1080p to 4K, and the frame rate drops by roughly half, indicating that the GPU's shading and memory bandwidth are being saturated.

At High settings, the trend is even more pronounced. The average FPS goes from 67.6 at 1080p to 52.1 at 1440p (a 23% drop) and then to 34.4 at 4K (a 49% drop from 1080p). The gap between Low and High settings widens as resolution increases: at 1080p, the difference is 38.1 FPS, but at 4K, it narrows to 18.7 FPS. This compression at higher resolutions is a classic sign that the GPU is working at its absolute limit, and the extra load from higher settings cannot be fully compensated for by the CPU.

The Ultra preset results reinforce this. At 1080p Ultra, the average is 59.3 FPS, which drops to 47.2 at 1440p and 29.8 at 4K. The 4K Ultra figure is the lowest of all measured rows, and the fact that it falls below 30 FPS suggests that the RTX 2060's 6 GB of GDDR6 memory and 192-bit bus are not sufficient for the highest fidelity at 4K. The data shows that 1440p is the practical ceiling for this combo if you want to maintain playable frame rates above 50 FPS, while 1080p is the only resolution where Ultra settings stay above 59 FPS.

CPU Role

The Ryzen 7 5800X3D brings 8 cores and 16 threads, with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. This is a Zen 3 architecture part on the AMD Socket AM4 platform, and its 96 MB of shared L3 cache is the standout feature—it is specifically designed to reduce memory latency in gaming workloads. The benchmark scores reflect this: the 3dmark_16_threads score is 7299, and the single-thread score is 884, which are strong numbers that place the CPU in the 83rd percentile of all CPUs.

In Control, the CPU's role is to feed the GPU with enough draw calls and physics calculations. The game is not heavily multi-threaded, but the 5800X3D's single-thread performance is sufficient to avoid bottlenecking the RTX 2060 at any resolution. The passmark_single_thread score of 3234 and the 3dmark_single_thread score of 884 indicate that the CPU can handle the game's logic without becoming a limiting factor. The cinebench_r23_multicore score of 24063 also shows that even if Control were to use more threads, the CPU has ample headroom.

The nearest rivals for the CPU, such as the Intel Core i9-11900K (deltaPct 0.1) and the AMD Ryzen 5 7600 (deltaPct -0.2), show that the 5800X3D is competitively positioned. Its 3dmark_max_threads score of 7285 is nearly identical to the 3dmark_16_threads score of 7299, suggesting that the CPU scales well with additional threads, but in a game like Control, the per-core performance is what matters most. The data indicates that the CPU is never the reason for frame rate drops—the measured FPS differences between settings are entirely attributable to the GPU's workload.

FAQ

Q: What is the best resolution to play Control with this combo?

A: The data shows 2560x1440 as the sweet spot. At High settings, the average FPS is 52.1, which is above the 50 FPS threshold for smooth gameplay. At 1920x1080, you get higher frame rates (67.6 FPS on High), but the visual fidelity gain from 1440p is significant, and the RTX 2060 can handle it without dropping below playable levels.

Q: Can this combo run Control at 4K?

A: Yes, but only at Low settings. The 3840x2160 Low preset averages 53.1 FPS, which is playable. At Medium, it drops to 41.9 FPS, and at High and Ultra, it falls to 34.4 and 29.8 FPS respectively, which are below the 30 FPS threshold for smooth motion in an action game.

Q: How does the RTX 2060 compare to its nearest rivals in terms of raw performance?

A: The RTX 2060 has an average benchmark score of 16074. Its closest rival, the AMD Radeon RX 7600S, scores 15996 (deltaPct 0.5), meaning the RTX 2060 is slightly ahead. The AMD Radeon Pro 5600M and Pro 5700 both score 16351 (deltaPct -1.7), meaning the RTX 2060 trails them by 1.7%. The AMD Radeon Pro W5500 scores 15786 (deltaPct 1.8), putting it behind the RTX 2060.

Q: Is the Ryzen 7 5800X3D a bottleneck for the RTX 2060 in Control?

A: No. The CPU's 3dmark_2_threads score of 1746 and 3dmark_4_threads score of 3392 show strong multi-threaded performance, and its percentile rank of 83 indicates it is far more powerful than the GPU. The measured FPS scaling from 1080p to 4K follows a GPU-bound pattern, with no signs of CPU stutter or frame pacing issues.

Q: What is the difference in performance between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings produce an average of 105.7 FPS, while Ultra produces 59.3 FPS. That is a 46.4 FPS drop, or about 44% lower performance. The RTX 2060's 6 GB of VRAM is sufficient for 1080p Ultra, but the higher shading complexity takes a significant toll.

Q: How does this combo rank among all tested combinations?

A: It ranks 1345 out of 1636 combos, which places it in the 82nd percentile from the bottom. This is a mid-to-low ranking, consistent with the RTX 2060's 58th percentile among all GPUs and the CPU's high-end position, but the GPU drags the overall combo down.

How This Combo Ranks

The combo rank of 1345 out of 1636 puts this system in the lower 18% of all tested combinations. This is not a surprise given the GPU's position—the RTX 2060 sits in the 58th percentile of all GPUs, which is a mid-range placement. The CPU, however, is in the 83rd percentile, which means the processor is doing more than its fair share of the work. The ranking suggests that this is a balanced but modest system: the CPU has headroom for a future GPU upgrade, but the RTX 2060 limits the overall experience.

In the context of Control specifically, the ranking reflects the game's demanding nature. The 4K Ultra result of 29.8 FPS and the 1440p Ultra result of 47.2 FPS are below what higher-tier GPUs would achieve, but the combo is not at the bottom of the list. The data shows that the 5800X3D is pulling its weight—if a weaker CPU were paired with the RTX 2060, the frame rates might be lower, but in this case, the GPU is the clear constraint. The nearest GPU rivals, such as the RX 7600S (deltaPct 0.5), show that the RTX 2060 is competitive with similar-generation parts, but none of these are high-end performers.

Measured FPS Breakdown

At 1920x1080, the full range of settings is playable. Low averages 105.7 FPS, Medium averages 76.8 FPS, High averages 67.6 FPS, and Ultra averages 59.3 FPS. The spread from Low to Ultra is 46.4 FPS, which gives you a wide choice depending on your preference for visual quality versus frame rate. The 1080p Ultra figure of 59.3 FPS is just above the 60 FPS target, so it is viable for most players.

At 2560x1440, the numbers are lower but still acceptable. Low averages 83.9 FPS, Medium averages 56.5 FPS, High averages 52.1 FPS, and Ultra averages 47.2 FPS. The Medium setting is the first to drop below 60 FPS, and Ultra falls below 50 FPS. For a smooth experience, Low or Medium is recommended at this resolution, with High being the upper limit for players who tolerate 52 FPS.

At 3840x2160, the RTX 2060 struggles. Low averages 53.1 FPS, Medium averages 41.9 FPS, High averages 34.4 FPS, and Ultra averages 29.8 FPS. Only Low stays above 50 FPS, and Ultra dips below 30 FPS, which is generally considered the minimum for playable frame rates in an action game. The GPU's 336.0 GB/s memory bandwidth and 6 GB VRAM are likely the limiting factors at this resolution.

Settings Recommendations

For the best balance of visual quality and performance, the 2560x1440 High preset is the recommended choice. It delivers an average of 52.1 FPS, which is smooth enough for a action-adventure game, and it takes advantage of the CPU's headroom without overwhelming the GPU. If you prefer a higher frame rate, the 1920x1080 Medium preset at 76.8 FPS is a strong alternative, offering a 24.7 FPS improvement over 1440p High while still looking crisp.

For players who want the absolute highest fidelity, the 1920x1080 Ultra preset at 59.3 FPS is the only Ultra setting that stays above 50 FPS. At 1440p Ultra, the 47.2 FPS average is borderline, and at 4K Ultra, the 29.8 FPS result is not recommended for a game that requires quick reactions. The data suggests that 4K is only viable at Low settings (53.1 FPS), which defeats the purpose of the higher resolution. Ultimately, the sweet spot is 1440p High or 1080p Medium/Ultra, depending on whether you prioritize resolution or frame rate.