Control

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4060 Ti 8 GB combination delivers a solid 1080p and 1440p experience in Control, but it clearly hits a performance ceiling at 4K with higher presets. The measured data shows a system that is well-balanced at lower resolutions, with the GPU becoming the primary limiting factor as resolution increases. This analysis breaks down exactly what you can expect from this pairing across the three primary resolutions and four quality presets, based strictly on the measured frame rates.

Resolution Scaling

The frame rate drop from 1080p to 4K is significant, but the pattern reveals the bottleneck. At High settings, the average frame rate falls from 104 FPS at 1920x1080 to 80.1 FPS at 2560x1440, a 23% reduction, and then to 54.5 FPS at 3840x2160, a 47.6% drop from 1440p. This steep decline is a classic sign of a GPU-limited scenario; the RTX 4060 Ti's 8 GB of VRAM and 128-bit memory bus are being saturated by the increasing pixel count.

The scaling from Low to Ultra settings further confirms this. At 1080p, the difference between Low (162.8 FPS) and Ultra (86.8 FPS) is a massive 76 FPS. This indicates that at lower resolutions, the CPU is capable of feeding the GPU far more frames than it can render, making the graphics card the clear limiting factor. The Ryzen 5 7600, with its 6 cores and 12 threads, is not the constraint here; it's the GPU's raw throughput.

The most telling data point is the Medium preset. At 1080p, it delivers 113.4 FPS, which is a healthy 9 FPS above High. However, at 4K, the difference between Medium (56.6 FPS) and High (54.5 FPS) shrinks to just 2.1 FPS. This convergence at higher resolutions shows that the GPU is so overburdened that the specific graphics settings have less impact on the final frame rate. The 4K Ultra preset drops to 44.6 FPS, which is below the 60 FPS target many players prefer, making it the least viable option for this combo.

Settings Recommendations

Based on the measured rows, the High preset at 2560x1440 offers the best balance of visual fidelity and performance. The 80.1 FPS average is well above the smooth-playability threshold, and it is only 9.1 FPS lower than the Medium preset at the same resolution. This suggests that the High preset provides a substantial visual upgrade over Medium without a proportional performance penalty at 1440p.

For players targeting 60 FPS at 4K, the data shows that High settings are borderline, with an average of 54.5 FPS. To achieve a more comfortable margin above 60 FPS at 4K, the Low preset is the only option that delivers a clear win, hitting 83.7 FPS. However, this comes with a significant reduction in visual quality. The Medium preset at 4K (56.6 FPS) is nearly identical to High, suggesting that the game's rendering pipeline is not scaling efficiently with pixel count for this GPU.

At 1080p, the Ultra preset is the clear choice for owners of 1080p monitors. The 86.8 FPS average is still very playable, and it provides the highest visual quality without dropping below the 60 FPS mark. The data shows that this combo has enough headroom at 1080p to absorb the performance hit from Ultra settings, making it a simple recommendation for that resolution.

How This Combo Ranks

The measured data places this combination at rank 665 out of 1636 tested combos in Control. This puts it in the 59th percentile of all tested systems, which is a solidly mid-range result. It is not a top-tier performer, but it is also far from the bottom. The ranking indicates that this specific pairing of a Ryzen 5 7600 and RTX 4060 Ti 8 GB is a competent, mainstream solution for this title, capable of handling the game well at common resolutions but not breaking any performance records.

This rank is a direct result of the GPU's performance ceiling. The CPU's benchmark scores are strong, with an average benchmark score of 26617 and a percentile ranking of 83 against all CPUs. Its nearest rivals, such as the AMD Ryzen 7 5800X3D, show a delta of only 0.2%, indicating that the 7600 is not a performance weak point. The GPU, however, has a much lower percentile ranking of 17 against all GPUs. This discrepancy in component performance classes explains why the combo's overall rank is lower than the CPU's individual standing; the GPU is holding the system back from a higher placement.

Measured FPS Breakdown

The complete measured data for this combo is as follows:

• 1920x1080 (1080p)
• Low: 162.8 FPS
• Medium: 113.4 FPS
• High: 104 FPS
• Ultra: 86.8 FPS

• 2560x1440 (1440p)
• Low: 122.9 FPS
• Medium: 89.2 FPS
• High: 80.1 FPS
• Ultra: 70.8 FPS

• 3840x2160 (4K)
• Low: 83.7 FPS
• Medium: 56.6 FPS
• High: 54.5 FPS
• Ultra: 44.6 FPS

The data shows a consistent performance hierarchy: lower resolutions and lower settings yield higher frame rates. The most notable jumps occur when moving from 1080p to 1440p, where the frame rate drops by roughly 20-25% across all settings. The drop from 1440p to 4K is even more pronounced, with a 30-40% reduction, highlighting the GPU's struggle with 4K resolution.

FAQ

Q: Is this combo good for 60 FPS gaming at 4K?

A: Only with specific settings. The data shows an average of 83.7 FPS on Low at 3840x2160, but this drops to 56.6 FPS on Medium and 54.5 FPS on High. For a stable 60 FPS, you would need to use Low settings. Ultra settings at 4K are not viable, as they produce only 44.6 FPS.

Q: What is the best resolution to use with this setup?

A: The 2560x1440 resolution provides the best balance. The High preset delivers 80.1 FPS, and even the Ultra preset maintains a playable 70.8 FPS. This gives you a comfortable margin for high-quality visuals without sacrificing smoothness.

Q: How much performance is lost from 1080p to 4K?

A: At High settings, the average frame rate drops from 104 FPS at 1080p to 54.5 FPS at 4K. This is a reduction of 49.5 FPS, or roughly 47.6%. The scaling is non-linear, with a steeper drop occurring between 1440p and 4K than between 1080p and 1440p.

Q: Is the CPU or GPU the limiting factor in this game?

A: The benchmark results indicate the GPU is the primary bottleneck. The CPU has an average benchmark score of 26617 and ranks in the 83rd percentile, while the GPU ranks in only the 17th percentile. The frame rate scaling with resolution also points to a GPU limitation, as performance drops significantly when pixel count increases.

Q: What is the difference between High and Ultra settings at 1440p?

A: The measured difference is 9.3 FPS. High settings average 80.1 FPS, while Ultra settings average 70.8 FPS. This is a relatively small performance cost for the additional visual features that Ultra typically provides.

Q: How does this combo rank compared to all tested systems?

A: It ranks 665th out of 1636 tested combos for Control. This places it in the upper-middle tier of all tested configurations. It is a capable setup, but not a high-end one.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture. Its base clock is 3.80 GHz with a boost clock of 5.10 GHz. In the context of Control, this CPU provides more than enough processing power to keep up with the GPU at most settings. Its strong single-thread performance, evidenced by a 3dmark single-thread score of 999, is crucial for game logic and frame pacing.

The CPU's benchmark data shows it is a very capable part. Its Cinebench R23 multicore score of 22992 and single-core score of 3246 are strong, placing it in the 83rd percentile of all CPUs. Its nearest rival, the AMD Ryzen 7 5800X3D, has an average score of 26574, which is only 0.2% different from the 7600's 26617. This means the 7600 is essentially on par with a well-known gaming CPU in synthetic tests.

However, the measured FPS data reveals that the CPU's potential is not fully utilized in this game. At 1080p with Low settings, the system produces 162.8 FPS, but at 1080p with Ultra settings, it produces 86.8 FPS. This 76 FPS gap is almost entirely due to the GPU's rendering workload. The CPU is capable of delivering far more frames than the RTX 4060 Ti can render, confirming that the Ryzen 5 7600 is not the performance limiter in this pairing. Its role is to feed the GPU efficiently, and the data suggests it does so without issue.