Control
This combination may struggle with this title, averaging 25 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 15 | 17 | 23 |
| 1440p QHD | 19 | 22 | 24 | 34 |
| 1080p Full HD | 25 | 29 | 32 | 46 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Control with AMD Ryzen 5 5500X3D + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The AMD Ryzen 5 5500X3D and NVIDIA GeForce GTX 1050 Ti combination delivers playable frame rates in Control only at 1080p with the Low preset, where it posts an average of 46 FPS. At any higher resolution or graphics setting, the system falls below 35 FPS, making the experience choppy and often unplayable. This pairing is severely bottlenecked by the GPU, which is a legacy entry-level component, while the CPU provides more than enough headroom for this title.
Resolution Scaling
The performance drop from 1080p to 4K is steep and consistent across all settings, revealing a system that is entirely GPU-bound. At the Low preset, the average frame rate falls from 46 FPS at 1920x1080 to 34 FPS at 2560x1440, a reduction of roughly 26%. Pushing further to 3840x2160 at Low yields only 23 FPS, meaning that moving from 1080p to 4K at this preset cuts performance in half. The scaling pattern is similar for the Medium and High presets, where the 1440p results are only about 5-7 FPS higher than the 4K results, indicating that the GPU is running out of pixel-pushing capacity very quickly.
At the Ultra preset, the situation is even more dire. The average frame rate starts at 25 FPS at 1080p, drops to 19 FPS at 1440p, and bottoms out at 13 FPS at 4K. This shows that the Ultra preset demands far more from the graphics card than it can deliver, and the gap between 1080p and 4K at Ultra is a 12 FPS loss, which is a 48% reduction. The data suggests that the rendering pipeline is saturated at all resolutions above 1080p, and the frame rate is largely dictated by the number of pixels the GTX 1050 Ti can process per second.
The measured FPS rows show that the 4K Medium preset has a minimum frame rate of 14 FPS and a maximum of 19 FPS, which is a narrow band that indicates the GPU is working at its absolute limit. In contrast, the 1080p Medium preset has a minimum of 27 FPS and a maximum of 37 FPS, showing a wider variance because the GPU has slightly more headroom to breathe. The resolution scaling indicates that the limiting component is unambiguously the graphics card; the CPU is not the constraint here, as the frame rates drop proportionally with pixel count rather than showing any signs of CPU-related stuttering or inconsistency.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is the primary bottleneck in this configuration. With 4 GB of GDDR5 memory on a 128-bit bus, it offers 112.1 GB/s of bandwidth, which is insufficient for the demands of Control at high resolutions. The GPU’s core runs at a base clock of 1291 MHz and a boost clock of 1392 MHz, with a pixel rate of 44.54 GPixel/s and a texture rate of 66.82 GTexel/s. These specifications place it in the 25th percentile of all GPUs, and its average benchmark score of 4193 is nearly identical to rivals like the AMD Radeon R5 M330 (0.6% faster) and the NVIDIA Quadro K2100M (1% faster), confirming its position at the very bottom of the performance spectrum.
The benchmark results for this GPU show a PassMark G3D score of 6340, but its DirectX 12 score is only 26, which is particularly telling for a game like Control that relies on modern APIs. The low DirectX 12 performance, coupled with a PassMark GPU compute score of 2652, explains why the frame rates crater so quickly when settings are raised. The 4K Ultra result of 13 FPS is not just a matter of pixel count; it is a reflection of the GPU’s inability to handle the advanced rendering features, such as volumetric lighting and complex physics, that Control uses heavily.
The memory bandwidth of 112.1 GB/s is a critical limitation. At 1080p Low, the system achieves 46 FPS, but when the texture quality increases to Medium or High, the frame rate drops to 32 and 29 FPS respectively. This suggests that the 4 GB VRAM buffer is being filled, and the GPU is forced to swap data more frequently, which throttles performance. The 7 Gbps effective memory speed is not enough to keep up with the data demands of the game’s environments, making the GTX 1050 Ti the clear culprit for the poor scaling. The GPU’s 75 W TDP and lack of power connectors highlight its entry-level design, and the data confirms that it is only suitable for the most modest settings in this title.
Settings Recommendations
The measured rows clearly indicate that the Low preset is the only viable option for a smooth experience, and even then, only at 1080p. The 1080p Low preset delivers an average of 46 FPS, which is the only setting in the entire dataset that approaches a playable 60 FPS target. At 1080p Medium, the average drops to 32 FPS, which is a 30% performance hit for what is likely a marginal visual improvement on a GPU of this class. The High preset at 1080p yields 29 FPS, and Ultra yields 25 FPS, both of which are below the threshold for comfortable gameplay in a fast-paced action title.
For users who are willing to accept lower frame rates, the 1440p Low preset at 34 FPS is technically playable, but it will feel sluggish during intense combat sequences. The 4K Low preset at 23 FPS is not recommended, as the frame pacing will be inconsistent and the experience will be frustrating. The data shows that the step from Low to Medium at any resolution incurs a significant penalty: at 1080p it is a 14 FPS drop, at 1440p it is a 10 FPS drop, and at 4K it is a 6 FPS drop. This indicates that the Medium preset introduces a level of complexity that the GTX 1050 Ti cannot handle without sacrificing a large portion of its frame rate.
The best experience per the measured rows is unequivocally 1080p Low. It provides the highest average FPS (46) and is the only configuration that stays above 30 FPS consistently. The 1080p Medium preset (32 FPS) could be considered if visual fidelity is prioritized over smoothness, but the 27 FPS minimum makes it risky. The Ultra preset is essentially a slideshow at all resolutions, and the 4K Ultra result of 13 FPS is the worst measured outcome, offering no benefit over the other settings. Users should stick to Low settings and prioritize resolution scaling down to 1080p to get the most out of this hardware combination.
How This Combo Ranks
This combination of an AMD Ryzen 5 5500X3D and a NVIDIA GeForce GTX 1050 Ti ranks 2854 out of 2888 tested combos in Control. This places it in the bottom 1.2% of all configurations, which is a reflection of the GPU’s age and limited capabilities rather than any fault of the CPU. The rank is driven entirely by the GPU’s inability to produce playable frame rates at common resolutions. For context, the GTX 1050 Ti’s nearest rivals in synthetic benchmarks are the AMD Radeon R5 M330 and the NVIDIA Quadro K2100M, both of which are similarly low-powered mobile or workstation parts, and the measured performance in this game aligns with that grouping.
The bottom-tier ranking is not surprising given the GPU’s 25th percentile standing among all GPUs. The CPU, in contrast, is a high-performing part that sits in the 85th percentile of all CPUs, with an average benchmark score of 37018. This creates a massive imbalance in the system, where the CPU is capable of far more than the GPU can deliver. The combo rank in Control is a direct consequence of this bottleneck, as the frame rates are limited by the graphics card, not the processor. The data shows that even a much weaker CPU would likely produce similar FPS numbers in this game, as the GTX 1050 Ti is the sole limiting factor.
The rank of 2854 out of 2888 indicates that there are only 34 tested combinations that perform worse than this one. This is a clear signal that this pairing is not suitable for modern gaming at standard settings. The results are consistent with the GPU’s age, as it was released in 2016 and is now end-of-life, whereas the CPU is a much newer 2025 release. The disparity in release dates and performance tiers is stark, and the benchmark data confirms that this combo should only be considered for e-sports titles or very old games, not for a demanding action-adventure game like Control.
CPU Role
The AMD Ryzen 5 5500X3D plays a minimal role in this game’s performance, as the GPU is the dominant bottleneck. The CPU features 6 cores and 12 threads, with a base clock of 3.00 GHz and a boost clock of 4.00 GHz. It has a large 96 MB shared L3 cache, which is a hallmark of the X3D series and typically helps in gaming scenarios. However, the synthetic benchmarks show that this CPU is very capable: it scores 20363 in PassMark multithread and 2941 in PassMark single-thread, placing it in the 85th percentile of all CPUs. Its average benchmark score of 37018 is nearly identical to the AMD Ryzen 5 5600F (0.2% faster) and the Intel Core Ultra 5 225 (0.2% faster), indicating it is a modern mid-range processor.
In Control, the CPU’s potential is entirely wasted. The measured FPS at 1080p Low is 46, which is a frame rate that the GTX 1050 Ti can achieve with ease, leaving the CPU with plenty of idle capacity. The PassMark physics score of 2282 and floating point math score of 34511 suggest that the CPU can handle complex game logic and physics calculations, but the GPU is not fast enough to render the frames that the CPU is preparing. The cores and threads are more than sufficient for this game, which is not known for being heavily CPU-bound, especially at lower resolutions where the GPU is the limiting factor.
The CPU’s 96 MB L3 cache is a notable feature, but it has no observable impact on the frame rates in this dataset because the GPU never allows the system to reach a CPU-limited scenario. If this CPU were paired with a modern graphics card, the results would be drastically different, but with the GTX 1050 Ti, the processor is effectively idle. The data shows that the CPU’s role is to feed the GPU with data, and it does so without any hiccups, as evidenced by the consistent frame rates at each setting. The bottleneck is so severe that upgrading the CPU would not yield any improvement in Control; only a GPU upgrade would change the measured FPS.
FAQ
*Q: What is the best resolution and settings for this combo in Control?*
A: The best measured result is at 1920x1080 with the Low preset, which achieves an average of 46 FPS. This is the only configuration that stays above 40 FPS, and it is the recommended setup for playable performance.
*Q: Can this system handle 4K gaming in Control?*
A: No. The highest 4K result is 23 FPS at the Low preset, and the Ultra preset drops to 13 FPS. All 4K settings are below the playable threshold, making 4K gaming impractical with this hardware.
Q: Is the CPU or GPU the bottleneck in this system?
A: The GPU is the definitive bottleneck. The GTX 1050 Ti ranks in the 25th percentile of all GPUs, while the Ryzen 5 5500X3D ranks in the 85th percentile of all CPUs. The frame rates scale with resolution, which is a classic sign of a GPU limitation.
Q: How does the GTX 1050 Ti compare to its nearest rivals in synthetic benchmarks?
A: The GTX 1050 Ti has an average benchmark score of 4193, which is 0.6% higher than the AMD Radeon R5 M330 (4170) and 1% higher than the NVIDIA Quadro K2100M (4151). This places it in the same performance tier as these entry-level parts.
Q: What is the frame rate difference between Low and Medium settings at 1080p?
A: At 1920x1080, the Low preset averages 46 FPS, while the Medium preset averages 32 FPS. This is a 14 FPS drop, or about a 30% reduction, which makes the Medium preset significantly less fluid.
Q: Does this combo rank well compared to other tested systems?
A: No, it ranks 2854 out of 2888 tested combos in Control, placing it in the bottom 1.2% of all configurations. This is due to the GPU’s low performance, not the CPU, which is a high-end part.
Hardware Specifications
AMD Ryzen 5 5500X3D
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500X3D + NVIDIA GeForce GTX 1050 Ti in Control
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 23.0 |
| 3840x2160 | Medium | 17.0 |
| 3840x2160 | High | 15.0 |
| 3840x2160 | Ultra | 13.0 |
| 2560x1440 | Low | 34.0 |
| 2560x1440 | Medium | 24.0 |
| 2560x1440 | High | 22.0 |
| 2560x1440 | Ultra | 19.0 |
| 1920x1080 | Low | 46.0 |
| 1920x1080 | Medium | 32.0 |
| 1920x1080 | High | 29.0 |
| 1920x1080 | Ultra | 25.0 |
Control with Ryzen 5 5500X3D + Other GPUs
See how Control performs with the same CPU but different graphics cards.
Control with GTX 1050 Ti + Other CPUs
See how Control performs with the same GPU but different processors.
Other Games with Ryzen 5 5500X3D + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.