Barony
This combination delivers exceptional performance with an average of 217 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 72 | 96 | 116 | 152 |
| 1440p QHD | 136 | 186 | 220 | 298 |
| 1080p Full HD | 216 | 301 | 348 | 464 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with Intel Core i7-12700KF + AMD Radeon RX 9070 XT, In-Depth Analysis
Resolution Scaling
The measured frame rates for Barony show a steep and consistent drop as resolution increases, which is the classic signature of a GPU-bound workload. At 1080p with Low settings, the Intel Core i7-12700KF and AMD Radeon RX 9070 XT combination produces 464.4 FPS. Moving to 1440p drops that figure to 297.5 FPS, a reduction of roughly 36%. At 4K, the same Low preset yields 152.1 FPS, which is about 67% lower than the 1080p result. This scaling pattern indicates that the rendering pipeline is heavily dependent on the graphics card’s fill rate and memory bandwidth as pixel count rises.
The gap between resolutions narrows as settings increase, which further confirms the GPU-centric nature of the bottleneck. With Ultra settings, the 1080p result is 215.6 FPS, while 1440p falls to 135.9 FPS and 4K drops to 72.2 FPS. The percentage loss from 1080p to 4K at Ultra is roughly 66%, nearly identical to the Low preset’s loss. This consistency across settings suggests that the game’s resolution scaling is not mitigated by lowering graphical fidelity; the pixel throughput requirement dominates regardless of the preset.
Comparing the High preset across resolutions tells the same story. At 1080p, the combo delivers 300.9 FPS. At 1440p, that number is 185.6 FPS, and at 4K it is 96.3 FPS. The 4K figure is only 32% of the 1080p figure, indicating a substantial performance penalty. The data shows that while 4K remains playable at all settings, the frame rate headroom shrinks dramatically. The limiting component here is clearly the GPU’s ability to process the larger frame buffer, not the CPU, as the processor’s high single-thread and multi-thread scores (3dmark single-thread 1043, max threads 9983) are more than sufficient for the game’s logic.
Settings Recommendations
Based on the measured rows, the Low preset offers the highest frame rates but sacrifices visual fidelity. At 4K, Low produces 152.1 FPS, which is more than double the Ultra result of 72.2 FPS. For players prioritizing smoothness over appearance, Low at 4K is the best choice, as it maintains a high refresh rate. However, the Medium preset provides a more balanced experience. At 4K, Medium yields 115.9 FPS, still well above the 60 FPS threshold, while at 1440p it reaches 220.3 FPS and at 1080p it hits 348 FPS. The jump from Low to Medium at 4K costs 36.2 FPS, which is a 24% reduction, but the visual upgrade is typically worth that trade-off for most users.
The High preset at 4K produces 96.3 FPS, which is close to the 100 FPS mark and represents a strong compromise. At 1440p, High reaches 185.6 FPS, and at 1080p it achieves 300.9 FPS. The data suggests that High is the sweet spot for 1440p and 4K, as it retains high frame rates without the steep performance hit of Ultra. Ultra is only recommended for players with 1080p monitors, where the 215.6 FPS result is still excellent, or for those who prioritize maximum image quality at 1440p with the 135.9 FPS result. At 4K, Ultra’s 72.2 FPS is playable but not ideal for fast-paced roguelike gameplay, where reaction time matters.
In summary, the best experience per the measured rows is the High preset for 1440p and 4K, and Ultra for 1080p. The Medium preset is a viable fallback for 4K if higher frame rates are required. The Low preset is only necessary for extreme refresh rate displays, as the 297.5 FPS at 1440p and 464.4 FPS at 1080p are far beyond typical monitor capabilities.
GPU Role
The AMD Radeon RX 9070 XT is the dominant factor in Barony’s performance, as evidenced by the resolution scaling analysis. This GPU features 16 GB of GDDR6 memory on a 256-bit bus, delivering 644.6 GB/s of bandwidth. The memory clock runs at 2518 MHz, with an effective data rate of 20.1 Gbps. These specifications are relevant because Barony’s frame rates at 4K, particularly at higher settings, depend on the card’s ability to move texture and geometry data quickly. The 4K Ultra result of 72.2 FPS likely reflects the memory subsystem being taxed by the larger frame buffer and higher-detail assets.
The GPU’s clock speeds are also noteworthy. The base clock is 1660 MHz, with a game clock of 2400 MHz and a boost clock of 2970 MHz. The gap between base and boost clocks indicates that the card can dynamically scale its frequency under load, which helps maintain performance in demanding scenes. The 4096 shading units and 128 ROPs contribute to the card’s pixel throughput, rated at 380.2 GPixel/s. The texture rate of 760.3 GTexel/s is another indicator of the card’s raw capability. The FP32 performance of 48.66 TFLOPS supports complex shader workloads, which Barony’s procedural generation and lighting effects may utilize.
The GPU’s percentile ranking is 82, and its average benchmark score is 39647. Its nearest rival, the AMD Radeon Pro 575, scores 39703, which is 0.1% higher. The NVIDIA RTX A500 Mobile scores 39568, 0.2% lower. These deltas are negligible, indicating that the RX 9070 XT performs on par with these competitors in synthetic benchmarks. However, in Barony, the measured FPS shows that the GPU is not the limiting factor at 1080p, where the CPU could potentially bottleneck if the game were more logic-heavy. The data shows that at 1080p Low, the 464.4 FPS result is likely near the game engine’s frame rate cap or the CPU’s single-thread limit, but the GPU still has headroom.
Measured FPS Breakdown
At 1920x1080, the frame rates are exceptionally high across all presets. The Low setting delivers 464.4 FPS, which is the highest measured value in the entire dataset. The Medium setting produces 348 FPS, while High reaches 300.9 FPS. Ultra drops to 215.6 FPS, which is still far above the refresh rate of most monitors. The scaling from Low to Ultra at 1080p shows a 54% performance reduction, reflecting the increased shader and texture complexity of higher presets.
At 2560x1440, the frame rates remain strong but show a clear step down. Low produces 297.5 FPS, Medium 220.3 FPS, High 185.6 FPS, and Ultra 135.9 FPS. The transition from 1080p to 1440p at each setting costs roughly 36-40% of the frame rate, which is consistent with the increased pixel count. The Ultra preset at 1440p is the first point where the frame rate drops below 150 FPS, but it remains suitable for high-refresh-rate gaming.
At 3840x2160, the frame rates are the lowest in the dataset but still playable. Low produces 152.1 FPS, Medium 115.9 FPS, High 96.3 FPS, and Ultra 72.2 FPS. The High and Ultra presets at 4K fall below 100 FPS, which may be a concern for players with 120Hz or 144Hz displays. The data shows that the gap between Medium and High at 4K is 19.6 FPS, while the gap between High and Ultra is 24.1 FPS, indicating that Ultra has a disproportionately large performance cost relative to High.
FAQ
Q: What is the highest frame rate achievable with this CPU and GPU combo in Barony?
A: The highest measured frame rate is 464.4 FPS, achieved at 1920x1080 with Low settings.
Q: Is the game playable at 4K with Ultra settings?
A: Yes, the average FPS at 3840x2160 with Ultra settings is 72.2 FPS, which is above the standard 60 FPS threshold.
Q: How much performance is lost when moving from 1080p to 4K at High settings?
A: At High settings, the frame rate drops from 300.9 FPS at 1080p to 96.3 FPS at 4K, a reduction of approximately 68%.
Q: Which preset offers the best balance of frame rate and visual quality at 1440p?
A: The High preset at 2560x1440 produces 185.6 FPS, which is a strong balance between the 220.3 FPS of Medium and the 135.9 FPS of Ultra.
Q: Does the CPU limit performance at any resolution or setting?
A: The data suggests the CPU is not the primary limiter, as frame rates scale consistently with resolution. The 3dmark single-thread score of 1043 and max threads score of 9983 indicate ample processing power.
Q: How does the GPU compare to its nearest rivals in average benchmark score?
A: The AMD Radeon RX 9070 XT has an average score of 39647, which is 0.1% lower than the AMD Radeon Pro 575 and 0.2% higher than the NVIDIA RTX A500 Mobile.
CPU Role
The Intel Core i7-12700KF plays a supporting role in Barony’s performance, as the game’s frame rates are primarily dictated by the GPU. This processor has 12 cores and 20 threads, with a base clock of 3.60 GHz and a boost clock of 5.00 GHz. Its architecture, Alder Lake, uses a 10 nm process and supports DDR4 and DDR5 memory. The cache hierarchy includes 80 KB of L1 per core, 1.25 MB of L2 per core, and 25 MB of shared L3 cache. These specifications are sufficient for Barony’s roguelike mechanics, which involve procedural level generation and entity management but are not heavily threaded.
The CPU’s benchmark scores confirm its capability. In Cinebench R23, it scores 28979 in multi-core and 4091 in single-core. The Geekbench scores are 13596 for multi-core and 2526 for single-core. The 3dmark tests show a range from 1043 in single-thread to 9983 in max threads, with 16-thread at 9282 and 8-thread at 7211. These results indicate that the processor can handle both heavily parallel workloads and single-threaded tasks effectively. In Barony, the single-thread performance is likely more relevant, as game logic and AI routines often rely on one or two cores.
The CPU’s nearest rival, the Intel Core i5-14400, has an average score of 35336, which is 0.1% lower than the i7-12700KF’s 35355. The Intel Core i7-13800H scores 35416, 0.2% higher, while the Intel Core i9-12900HX scores 35289, 0.2% lower. These deltas are all within 0.3%, indicating that the i7-12700KF is competitively positioned. The percentile rank of 89 means it outperforms the majority of CPUs in the database. However, in Barony, the CPU does not become a bottleneck even at 1080p Low with 464.4 FPS, as the GPU still has performance headroom. The data shows that the CPU’s role is to feed the GPU without limiting frame rates, which it does successfully across all tested presets and resolutions.
Hardware Specifications
Intel Core i7-12700KF
AMD Radeon RX 9070 XT
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-12700KF + AMD Radeon RX 9070 XT in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 152.1 |
| 3840x2160 | Medium | 115.9 |
| 3840x2160 | High | 96.3 |
| 3840x2160 | Ultra | 72.2 |
| 2560x1440 | Low | 297.5 |
| 2560x1440 | Medium | 220.3 |
| 2560x1440 | High | 185.6 |
| 2560x1440 | Ultra | 135.9 |
| 1920x1080 | Low | 464.4 |
| 1920x1080 | Medium | 348.0 |
| 1920x1080 | High | 300.9 |
| 1920x1080 | Ultra | 215.6 |
Barony with ii7-12700KF + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 9070 XT + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with ii7-12700KF + RX 9070 XT
Explore FPS benchmarks for other games using this same hardware combination.