Barony

Barony

AVERAGE FPS
216
excellent

This combination delivers exceptional performance with an average of 216 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 68 97 113 155
1440p QHD 137 190 218 297
1080p Full HD 211 299 344 468

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 155
3840x2160 Medium 113
3840x2160 High 97
3840x2160 Ultra 68
2560x1440 Low 297
2560x1440 Medium 218
2560x1440 High 190
2560x1440 Ultra 137
1920x1080 Low 468
1920x1080 Medium 344
1920x1080 High 299
1920x1080 Ultra 211

Barony with Intel Core i5-12600KF + AMD Radeon RX 9070 XT, In-Depth Analysis

Resolution Scaling

The measured FPS data for Barony reveals a predictable but steep scaling curve as resolution increases. At 1920x1080 with Low settings, the combo delivers 467.7 FPS, which drops to 297.1 FPS at 2560x1440 and further to 155.2 FPS at 3840x2160. That represents a 66.8% reduction from 1080p Low to 4K Low, indicating that even at the lowest settings, the rendering load at 4K is substantial enough to cut frame rates by roughly two-thirds.

The scaling pattern shifts noticeably when moving to higher quality presets. At Ultra settings, the frame rate goes from 211.3 FPS at 1080p to 136.9 FPS at 1440p, then down to 67.7 FPS at 4K. The 4K Ultra result is only 32% of the 1080p Ultra figure, showing that the combination of high resolution and maximum settings creates a disproportionately heavy workload. This suggests that at 4K Ultra, the GPU is the dominant limiting component, as the frame rate drops below what would be expected from pure resolution scaling alone.

At Medium settings, the drop from 1080p (344.4 FPS) to 1440p (217.7 FPS) is a 36.8% reduction, while the drop from 1440p to 4K (113 FPS) is 48.1%. The steeper decline at higher resolutions points to the GPU becoming increasingly saturated. The data indicates that 1080p and 1440p are largely CPU-bound territory at lower settings, where the frame rates exceed 200 FPS, while 4K consistently brings the GPU into play as the bottleneck.

How This Combo Ranks

The Intel Core i5-12600KF paired with the AMD Radeon RX 9070 XT ranks 502nd out of 1702 tested combos in Barony. This places the configuration in the upper 30% of all combinations tested, which is a solid position for a roguelike title that does not typically demand extreme hardware. The percentile ranking reflects a system that is well above the median but not at the very top tier of performance.

Given that Barony is a roguelike with a 2015 release date, the game's engine is not particularly demanding by modern standards. A rank of 502 out of 1702 suggests that many other combinations outperform this pairing, likely due to the GPU being the limiting factor at higher resolutions. The CPU, as detailed in the next section, has strong multi-threaded capabilities, but the ranking indicates that the overall combo performance is constrained by other elements in the system.

The rank position implies that this combo is competitive but not class-leading. For a game that can run at very high frame rates even on modest hardware, the 502nd position out of 1702 combos suggests the pairing is efficient but leaves headroom for other configurations to pull ahead, particularly those with more powerful GPUs at 4K resolution.

CPU Role

The Intel Core i5-12600KF is a 10-core, 16-thread processor from the Core 12th Gen series, built on Intel's Alder Lake architecture. It features a base clock of 3.70 GHz and a boost clock of 4.90 GHz, with a 125W TDP. The CPU's multi-threaded performance is strong, as evidenced by its Cinebench R23 multi-core score of 23444 and Passmark multi-thread score of 27575. Single-thread performance is also respectable, with a Cinebench R23 single-core score of 3309 and a Geekbench single-core score of 2529.

In Barony, the CPU's role becomes apparent when examining the frame rate scaling across resolutions. At 1080p Low, the combo hits 467.7 FPS, a figure that is far beyond what most displays can show. This high frame rate indicates that the CPU is capable of feeding the GPU at 1080p, where the rendering workload is lighter. The 10-core design with 16 threads provides ample parallel processing power for the game's logic, which in a roguelike typically involves procedural generation and entity management.

The boost clock of 4.90 GHz is particularly relevant for single-threaded tasks, which are common in game simulation loops. The 20 MB of shared L3 cache also helps reduce latency when accessing frequently used data. The CPU's 3DMark scores reinforce its capability: 7956 in the 16-thread test and 1016 in single-thread. These numbers suggest that the i5-12600KF is not the bottleneck in this combo until frame rates climb above 300 FPS, which only occurs at 1080p Low and Medium settings.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings produce 467.7 FPS, Medium yields 344.4 FPS, High achieves 298.7 FPS, and Ultra drops to 211.3 FPS. The progression from Low to Ultra at 1080p shows a 54.8% reduction in frame rate, which is a substantial impact from graphical quality settings alone. Even at Ultra, the frame rate remains above 200 FPS, making this resolution entirely GPU-limited only at the highest settings.

Moving to 2560x1440, the frame rates remain high but show a clear step down. Low settings produce 297.1 FPS, Medium delivers 217.7 FPS, High reaches 189.6 FPS, and Ultra drops to 136.9 FPS. The 1440p Ultra result is still above 120 FPS, which is smooth for most gaming scenarios. The drop from 1080p Ultra to 1440p Ultra is 35.2%, which is close to the 33% increase in pixel count, indicating that the GPU is handling the additional resolution with reasonable efficiency at this setting.

At 3840x2160, the frame rates fall significantly. Low settings produce 155.2 FPS, Medium delivers 113 FPS, High achieves 96.7 FPS, and Ultra drops to 67.7 FPS. The 4K Ultra result is below the 70 FPS threshold, which may be noticeable for some users. The gap between Low and Ultra at 4K is 56.4%, similar to the 1080p gap, but the absolute frame rates are much lower. This pattern confirms that 4K is where the GPU becomes the primary constraint, as even Low settings cannot reach the frame rates seen at 1080p Medium.

GPU Role

The AMD Radeon RX 9070 XT is built on the RDNA 4.0 architecture with the Navi 48 chip, manufactured on a 4 nm process at TSMC. It features 16 GB of GDDR6 memory on a 256-bit bus, delivering 644.6 GB/s of bandwidth. The GPU has 4096 shading units, 256 TMUs, and 128 ROPs, with a boost clock of 2970 MHz and a game clock of 2400 MHz. Its FP32 performance is rated at 48.66 TFLOPS, and it supports DirectX 12 Ultimate, Vulkan 1.4, and OpenGL 4.6.

In Barony, the GPU's impact is most visible at 4K resolution. The 16 GB VRAM is more than sufficient for this game, which is a 2015 roguelike that does not feature high-resolution textures or complex geometry. The 644.6 GB/s memory bandwidth ensures that the GPU can feed its 4096 shading units without stalls, even at 4K. The boost clock of 2970 MHz is high for a modern GPU, and this is reflected in the frame rates at lower resolutions where the GPU is not the primary bottleneck.

The GPU's benchmark scores show strong performance: a Passmark G3D score of 26795 and a 3DMark Steel Nomad DX12 score of 7260. These figures place the RX 9070 XT in the 82nd percentile of all GPUs, which is a high standing. In Barony, the GPU's role becomes dominant at 4K, where the frame rate drops from 155.2 FPS at Low to 67.7 FPS at Ultra. This 56.4% reduction at 4K is the largest across all resolutions, confirming that the GPU is the limiting factor at this resolution.

At 1080p and 1440p, the GPU still plays a role but is less constrained. The frame rates at these resolutions are high enough that the CPU's capabilities are more relevant, as seen in the 467.7 FPS result at 1080p Low. The GPU's 16 GB VRAM and high bandwidth provide headroom for future games with larger memory requirements, though Barony itself does not stress these resources.

Hardware Specifications

Intel Core i5-12600KF

Cores / Threads 10 / 16
Base Clock 3700 MHz
Boost Clock 4900 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

AMD Radeon RX 9070 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2970 MHz MHz
TDP 304 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-12600KF + AMD Radeon RX 9070 XT in Barony

Resolution Settings Avg FPS
3840x2160 Low 155.2
3840x2160 Medium 113.0
3840x2160 High 96.7
3840x2160 Ultra 67.7
2560x1440 Low 297.1
2560x1440 Medium 217.7
2560x1440 High 189.6
2560x1440 Ultra 136.9
1920x1080 Low 467.7
1920x1080 Medium 344.4
1920x1080 High 298.7
1920x1080 Ultra 211.3

Barony with ii5-12600KF + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with RX 9070 XT + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with ii5-12600KF + RX 9070 XT

Explore FPS benchmarks for other games using this same hardware combination.