Barony

Barony

AVERAGE FPS
66
good

This combination provides smooth gameplay with an average of 66 FPS, suitable for most gaming scenarios.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 21 30 35 47
1440p QHD 41 57 66 89
1080p Full HD 65 90 105 141

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 47
3840x2160 Medium 35
3840x2160 High 30
3840x2160 Ultra 21
2560x1440 Low 89
2560x1440 Medium 66
2560x1440 High 57
2560x1440 Ultra 41
1920x1080 Low 141
1920x1080 Medium 105
1920x1080 High 90
1920x1080 Ultra 65

Barony with AMD Ryzen AI Max+ 395 + AMD Radeon 890M, In-Depth Analysis

The AMD Ryzen AI Max+ 395 paired with the AMD Radeon 890M integrated graphics presents a peculiar case for Barony, a 2015 roguelike that does not demand modern hardware. The measured frame rates across resolutions and settings reveal a system that is entirely GPU-limited in this title, with the CPU’s substantial resources largely idle. This combo ranks 2759th out of 2935 tested combinations, placing it in the bottom 6% of all tested systems, which is a surprising result given the CPU’s strong synthetic benchmark scores. The data points to an integrated GPU that, while capable for light gaming, struggles to maintain high frame rates at demanding settings in this particular game.

Resolution Scaling

The frame rate drop from 1080p to 4K is stark and consistent across all settings, confirming that the AMD Radeon 890M is the primary bottleneck. At High settings, the average FPS falls from 90 at 1920x1080 to 57 at 2560x1440, a 37% reduction, and then to 30 at 3840x2160, a further 47% drop from the 1440p figure. This scaling pattern indicates that pixel throughput is the limiting factor, as the GPU’s shading units and ROPs are overwhelmed by the increasing pixel count. The integrated graphics’ pixel rate of 92.80 GPixel/s and texture rate of 185.6 GTexel/s are simply insufficient for 4K rendering in this title.

Low settings exhibit a similar trend, with 141 FPS at 1080p, 89 FPS at 1440p, and 47 FPS at 4K. The relative drops are slightly less severe percentage-wise (37% from 1080p to 1440p, 47% from 1440p to 4K), but the absolute frame rates remain modest. Medium settings show 105 FPS at 1080p, 66 FPS at 1440p, and 35 FPS at 4K, with the 4K result dipping to a minimum of 29 FPS. Ultra settings are the most demanding, with 65 FPS at 1080p, 41 FPS at 1440p, and just 21 FPS at 4K, the latter being borderline unplayable.

The resolution scaling data suggests that the CPU, with its 16 cores and 32 threads, is never the constraint. If the CPU were limiting, we would expect frame rates to remain relatively flat across resolutions, as the CPU workload in a roguelike like Barony is largely independent of resolution. Instead, every resolution change produces a proportional FPS change, which is the classic signature of a GPU-bound scenario. The Radeon 890M’s system-shared memory, with bandwidth described as "System Dependent," further compounds the issue, as higher resolutions require more memory bandwidth, which is shared with the CPU.

How This Combo Ranks

The combo rank of 2759 out of 2935 tested combinations places this system in the bottom 6% of all tested combos for Barony. This is a remarkably low ranking for a CPU that sits in the 95th percentile among all CPUs in synthetic benchmarks. The disconnect highlights how much the GPU dominates in this game. The Radeon 890M, by contrast, holds only the 45th percentile among all GPUs, with an average benchmark score of 9210.

The GPU’s nearest rivals in synthetic benchmarks are telling. The AMD Radeon Vega 8 scores 9221, a delta of -0.1%, meaning the 890M is essentially tied with that older integrated solution. The NVIDIA GeForce GTX 960 scores 9273, a delta of -0.7%, and the GTX 465 scores 9294, a delta of -0.9%. The 890M is also within 1% of the GTX 850M, which scores 9302. These rival comparisons show that the 890M’s raw compute is on par with entry-level discrete GPUs from several generations ago, which explains why its performance in Barony is so lackluster.

The CPU’s nearest rivals, meanwhile, include the AMD Ryzen Threadripper PRO 9945WX with an average score of 76513, a 1.6% delta above the 395’s 77740 average. The Intel Core i9-14900K scores 79097, a delta of -1.7%, meaning the 395 is slightly behind that flagship desktop chip. The AMD Ryzen 9 8945HX scores 76212, a 2% delta. These comparisons underscore that the CPU is a high-end part, yet the combo rank remains low because the GPU is the limiting factor. In a game like Barony, the CPU’s 35314 Cinebench R23 multicore score and 2044 single-core score are irrelevant if the GPU cannot render frames fast enough.

GPU Role

The AMD Radeon 890M is an integrated GPU based on the RDNA 3.5 architecture, built on a 4 nm process with 34,000 million transistors. Its base clock is 400 MHz, with a boost clock of 2900 MHz. The memory is system-shared, meaning it uses the same LPDDR5X memory as the CPU, with bandwidth described as "System Dependent." This is a critical limitation, as the GPU cannot access dedicated VRAM, and memory bandwidth is shared with the CPU’s 16 cores.

In Barony, the GPU’s 1024 shading units, 64 TMUs, and 32 ROPs are responsible for all rendering. The 16 ray tracing cores are present, but Barony does not utilize ray tracing, so they contribute nothing to the measured frame rates. The GPU’s FP32 performance of 5.939 TFLOPS is modest by modern standards, and this shows in the frame rates. At 1080p High, the 890M manages 90 FPS, which is playable, but at 4K Ultra, it falls to 21 FPS, which is not.

The GPU’s DirectX 12 Ultimate support and Vulkan 1.4 compatibility mean it can technically run modern APIs, but Barony, released in 2015, likely uses DirectX 11 or earlier. The PassMark DirectX 11 score of 73 indicates decent but not outstanding performance in that API. The 3DMark Steel Nomad DX12 score of 590 is low, but that is a more demanding test than Barony. The Geekbench OpenCL score of 37254 and Vulkan score of 40808 suggest the GPU can handle compute workloads, but gaming performance is what matters here.

The system-shared memory is a particular concern at higher resolutions. At 4K, the GPU needs to access more memory for frame buffers and textures, but it shares bandwidth with the CPU. The measured FPS at 4K Medium shows a minimum of 29 FPS, indicating that memory contention might be causing frame time spikes. The "System Dependent" bandwidth means that in a system with this CPU’s 256.0 GB/s memory bandwidth, the GPU has access to that same pool, but it is still not enough to maintain smooth frame rates at 4K.

Measured FPS Breakdown

At 1920x1080, the data shows a clear progression across settings. Low settings yield 141 FPS average, which is the highest measured in any configuration. Medium settings produce 105 FPS, with a minimum of 89 FPS and a maximum of 121 FPS. High settings drop to 90 FPS, while Ultra settings yield 65 FPS. The 1080p results are the most playable, with even Ultra settings maintaining a reasonable frame rate. The difference between Low and Ultra is 76 FPS, a 54% reduction, indicating that the GPU is sensitive to settings changes at this resolution.

At 2560x1440, the frame rates drop significantly. Low settings produce 89 FPS, which is still playable. Medium settings yield 66 FPS, with a minimum of 56 FPS and a maximum of 76 FPS. High settings fall to 57 FPS, and Ultra settings produce 41 FPS. The gap between Low and Ultra narrows to 48 FPS, a 54% reduction, similar to the 1080p scaling. However, the absolute numbers are lower, and Ultra settings at 1440p are borderline for smooth gameplay, though 41 FPS is acceptable for a roguelike.

At 3840x2160, the GPU is clearly overburdened. Low settings produce 47 FPS, which is the only playable configuration at this resolution. Medium settings yield 35 FPS, with a minimum of 29 FPS and a maximum of 40 FPS. High settings drop to 30 FPS, and Ultra settings produce just 21 FPS. The difference between Low and Ultra is 26 FPS, a 55% reduction, but the absolute numbers are all below the 60 FPS threshold. Even at Low settings, 4K gaming is not smooth, and the minimum FPS at Medium (29) suggests stuttering.

The data shows that the most consistent experience is at 1080p, where all settings produce frame rates above 60 FPS. At 1440p, only Low and Medium settings maintain playable frame rates. At 4K, only Low settings approach playability, and even then, 47 FPS is marginal. The measured FPS values are the only data available, with no min or max values for most configurations, but the available min/max data for Medium settings across all resolutions shows a consistent 10-11 FPS range between minimum and maximum.

FAQ

Q: What is the best resolution for this combo in Barony?

A: The data shows 1920x1080 is the only resolution where all settings maintain average frame rates above 60 FPS. At Low settings, the average is 141 FPS, and even Ultra settings produce 65 FPS, making 1080p the most consistent choice.

Q: Can this combo handle 4K gaming in Barony?

A: At 3840x2160, only Low settings produce an average above 40 FPS, with 47 FPS. Medium settings average 35 FPS, High averages 30 FPS, and Ultra averages 21 FPS. None of these are smooth, so 4K is not recommended.

Q: How does the integrated GPU compare to discrete GPUs in synthetic benchmarks?

A: The Radeon 890M has an average benchmark score of 9210, which is within 1% of the AMD Radeon Vega 8 (9221), NVIDIA GeForce GTX 960 (9273), GTX 465 (9294), and GTX 850M (9302). This places it in the 45th percentile of all GPUs.

Q: Is the CPU a bottleneck in Barony?

A: No. The CPU has 16 cores and 32 threads with a boost clock of 5.10 GHz, and its Cinebench R23 multicore score is 35314. The frame rate scaling with resolution indicates the GPU is the limiting factor, not the CPU.

Q: What settings should be used at 1440p?

A: At 2560x1440, Low settings average 89 FPS and Medium settings average 66 FPS, with a minimum of 56 FPS. High settings average 57 FPS, and Ultra averages 41 FPS. Low or Medium are the safest choices for smooth gameplay.

Q: Why does the combo rank so low despite a high-end CPU?

A: The combo rank is 2759 out of 2935, placing it in the bottom 6%. The GPU’s 45th percentile performance, with an average score of 9210, is the primary cause. The CPU’s high benchmark scores do not compensate for the GPU’s limited rendering capability in this game.

Settings Recommendations

For the best experience, the data suggests prioritizing 1080p resolution. At 1920x1080, Medium settings provide 105 FPS average, with a minimum of 89 FPS and a maximum of 121 FPS. This configuration offers a good balance between visual quality and performance, as the minimum FPS stays well above the 60 FPS threshold. High settings at 1080p produce 90 FPS average, which is also excellent, and the visual upgrade over Medium may be worthwhile for players who prioritize image quality. Ultra settings at 1080p yield 65 FPS average, which is still playable, but the 40 FPS drop from Medium suggests diminishing returns.

At 1440p, Medium settings are the highest playable option, with 66 FPS average and a 56 FPS minimum. Low settings at 1440p produce 89 FPS, which is smoother, but the visual quality is reduced. High settings at 1440p average 57 FPS, which is borderline, and Ultra at 41 FPS is not recommended for consistent gameplay. For players who must use 1440p, Medium settings offer the best compromise, as the minimum FPS of 56 is just below the 60 FPS target but still acceptable for a roguelike.

At 4K, the data indicates that only Low settings are viable, with 47 FPS average. Medium settings at 4K average 35 FPS with a 29 FPS minimum, which will cause noticeable stuttering. High and Ultra at 4K are not playable, with 30 FPS and 21 FPS averages respectively. The recommendation is to avoid 4K unless the player accepts Low settings and tolerates sub-60 FPS performance. The 1080p Low setting, with 141 FPS average, is the highest performance configuration in the data, but it sacrifices all visual fidelity for speed.

The measured rows show that the GPU’s performance scales consistently with settings, with roughly a 54-55% reduction in FPS from Low to Ultra at each resolution. This means the settings slider has a predictable effect, and players can estimate performance at intermediate settings. For the best overall experience, 1080p Medium is the sweet spot, offering 105 FPS average with a minimum of 89 FPS, which is smooth and visually acceptable. The 4K Medium configuration, with its 29 FPS minimum, is the worst option in terms of consistency, and should be avoided.

CPU Role

The AMD Ryzen AI Max+ 395 is a 16-core, 32-thread processor based on the Zen 5 architecture, codenamed Strix Halo. It has a base clock of 3.00 GHz and a boost clock of 5.10 GHz, with a TDP of 55 W. The CPU’s cache includes 80 KB of L1 per core, 1 MB of L2 per core, and 64 MB of shared L3 cache. Its memory support is LPDDR5X with a quad-channel bus, providing 256.0 GB/s of bandwidth. The CPU’s synthetic benchmarks are impressive: Cinebench R23 multicore score of 35314, single-core score of 2044, Geekbench multicore score of 20992, and single-core score of 2464. The PassMark multithread score is 54934, and the single-thread score is 4147.

In Barony, these CPU resources are largely untapped. The game is a roguelike, which typically involves procedural generation and AI calculations, but the frame rate data shows no evidence of CPU bottlenecking. If the CPU were the constraint, we would expect lower frame rates at lower resolutions, where the GPU has less work to do. Instead, the 1080p Low setting achieves 141 FPS, which is the highest measured, and the 4K Ultra setting achieves 21 FPS, which is the lowest. This inverse relationship between resolution and FPS is the hallmark of GPU limitation.

The CPU’s 16 cores and 32 threads are more than sufficient for Barony’s single-threaded or lightly threaded workload. The single-core performance, as measured by Geekbench’s 2464 and Cinebench R23’s 2044, is high, and the boost clock of 5.10 GHz ensures fast response times. The 64 MB of L3 cache is ample for the game’s data, and the quad-channel memory bandwidth of 256.0 GB/s far exceeds what a roguelike requires. The CPU’s PassMark data compression score of 690650 and data encryption score of 35455 are irrelevant to gaming but show the CPU’s overall capability.

The CPU’s nearest rivals in synthetic benchmarks include the AMD Ryzen Threadripper PRO 9945WX, which scores 76513, a 1.6% delta above the 395’s 77740. The AMD EPYC Embedded 8224P scores 76492, a 1.6% delta. The Intel Core i9-14900K scores 79097, a -1.7% delta, meaning the 395 is slightly behind that chip. The AMD Ryzen 9 8945HX scores 76212, a 2% delta. These comparisons show the 395 is a top-tier CPU, but in Barony, its performance advantage is nullified by the GPU.

The CPU’s integrated graphics, listed as Radeon 8060S, are not the same as the Radeon 890M used in this combo. The 890M is a separate integrated GPU, and the fact that this combo uses it means the CPU’s own iGPU is not active. The CPU’s memory bus and bandwidth are shared with the GPU, and the 256.0 GB/s bandwidth is the connection between the two. In Barony, the CPU’s role is to feed the GPU with draw calls and game logic, and the data shows it does so without issues, as frame rates are solely determined by GPU settings and resolution. The CPU’s 95th percentile ranking among all CPUs, with an average benchmark score of 77740, confirms its high-end status, but it cannot overcome the GPU’s 45th percentile ranking in this game.

Hardware Specifications

AMD Ryzen AI Max+ 395

Cores / Threads 16 / 32
Base Clock 3000 MHz
Boost Clock 5100 MHz
TDP 55W
Socket AMD Socket FP11
View Full CPU Details →

AMD Radeon 890M

VRAM System Shared System Shared
Base Clock —
Boost Clock 2900 MHz MHz
TDP 15 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen AI Max+ 395 + AMD Radeon 890M in Barony

Resolution Settings Avg FPS
3840x2160 Low 47.0
3840x2160 Medium 35.0
3840x2160 High 30.0
3840x2160 Ultra 21.0
2560x1440 Low 89.0
2560x1440 Medium 66.0
2560x1440 High 57.0
2560x1440 Ultra 41.0
1920x1080 Low 141.0
1920x1080 Medium 105.0
1920x1080 High 90.0
1920x1080 Ultra 65.0

Barony with Ryzen AI Max+ 395 + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with 890M + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with Ryzen AI Max+ 395 + 890M

Explore FPS benchmarks for other games using this same hardware combination.