Barony
This combination delivers exceptional performance with an average of 203 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 65 | 95 | 108 | 149 |
| 1440p QHD | 126 | 176 | 206 | 277 |
| 1080p Full HD | 204 | 283 | 331 | 419 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 2600 + AMD Radeon RX 9070, In-Depth Analysis
The AMD Ryzen 5 2600 paired with the AMD Radeon RX 9070 produces a striking split in Barony: at 1080p the frame rates are so high that the CPU becomes the determining factor, while at 4K the GPU workload dominates and frame rates drop accordingly. This combination ranks 582nd out of 1702 tested combos in the game, placing it in the upper third of the field. The data below breaks down how each component contributes to the measured results.
Resolution Scaling
The measured FPS values show a clear and consistent decline as resolution increases, but the magnitude of that decline varies dramatically by settings preset. At Low settings, the average frame rate falls from 419.4 FPS at 1920x1080 to 277.3 FPS at 2560x1440, a reduction of roughly 34%, and then to 148.8 FPS at 3840x2160, which is 64.5% below the 1080p figure. This pattern indicates that even at Low settings, the GPU is increasingly taxed as pixel count grows, but the absolute numbers remain high enough that the CPU is never fully saturated.
At Ultra settings, the scaling is steeper in percentage terms. The 1080p Ultra average is 204.2 FPS, dropping to 126.2 FPS at 1440p (a 38.2% decrease) and then to 64.6 FPS at 4K (a 68.4% decrease from 1080p). The 4K Ultra result of 64.6 FPS is the lowest measured value in the entire dataset, suggesting that the RX 9070’s rendering load at this resolution and preset combination becomes the primary bottleneck. Medium and High presets sit between these extremes, with 4K averages of 108.2 FPS and 94.9 FPS respectively.
The resolution scaling behavior reveals that Barony is not a particularly demanding title for this hardware until 4K Ultra is enabled. The gap between Low and Ultra at 1080p is 215.2 FPS (419.4 vs 204.2), but at 4K that gap narrows to 84.2 FPS (148.8 vs 64.6). This compression of the settings spread at higher resolutions is a classic sign of the GPU becoming the limiting component; when the GPU is fully occupied, the CPU has less headroom to express differences between presets. Conversely, at 1080p Low, the 419.4 FPS figure suggests the CPU is approaching its practical limit for frame generation in this title, since the GPU would theoretically be capable of even higher output given its benchmark scores.
CPU Role
The Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, built on the Zen architecture (Pinnacle Ridge) with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. Its cache layout includes 96 KB L1 per core, 512 KB L2 per core, and 16 MB shared L3. The processor’s benchmark scores place it at the 77th percentile among all CPUs, with an average benchmark score of 19616. Its nearest rivals in aggregate CPU performance include the Intel Core i5-1345U (average score 19691, deltaPct -0.4), the AMD Ryzen 5 7530U (average score 19508, deltaPct 0.6), the Intel Core i5-11600KF (average score 19740, deltaPct -0.6), and the Intel Core i7-10700F (average score 19485, deltaPct 0.7). These deltas are all within 0.7% of the Ryzen 5 2600’s score, indicating that it performs on par with a broad range of modern mobile and desktop chips in synthetic tests.
For Barony specifically, the CPU’s role is most evident in the 1080p Low and Medium results. The 419.4 FPS average at 1080p Low is far above what most displays can show, but it also suggests that the CPU is delivering frames faster than the GPU can process at higher settings. The single-thread performance, as measured by Cinebench R23 single-core score of 1579, is modest by modern standards, but Barony’s roguelike gameplay likely does not demand extreme single-thread throughput. The multi-threaded scores are more substantial: Cinebench R23 multi-core is 11186, and PassMark multi-thread is 13160. These figures indicate that the CPU can handle the game’s background tasks and any additional system load without becoming a severe constraint, except at the very highest frame rates.
The CPU’s 12 threads and 16 MB of shared L3 cache provide adequate capacity for a game of this type. The measured FPS at 1080p High (282.8) and 1440p High (176) show that the CPU keeps pace with the GPU’s output up to a point. However, the gap between 1080p Low (419.4) and 1080p Ultra (204.2) suggests that the CPU is not the limiting factor at Ultra; rather, the GPU’s workload increases with settings, and the CPU has ample headroom to feed it. The Ryzen 5 2600’s lack of a high boost clock (3.90 GHz) may cap its maximum frame generation in lightly threaded scenarios, but the data does not show a clear CPU bottleneck at any resolution above 1080p Low.
GPU Role
The Radeon RX 9070 is the dominant component in this pairing, with 16 GB of GDDR6 memory on a 256-bit bus, delivering 644.6 GB/s of bandwidth. Its boost clock is 2520 MHz, with a game clock of 2070 MHz and a base clock of 1330 MHz. The GPU’s benchmark scores are strong: it sits at the 79th percentile among all GPUs with an average benchmark score of 34780. Its nearest rivals in aggregate GPU performance include the NVIDIA A2 (average score 34866, deltaPct -0.2), NVIDIA Quadro GV100 (average score 34677, deltaPct 0.3), AMD Radeon HD 7970 (average score 34541, deltaPct 0.7), and AMD Radeon PRO W6400 (average score 34511, deltaPct 0.8). These deltas are all under 1%, though it is importantly the A2 and Quadro GV100 are not gaming-focused cards, making the RX 9070’s gaming performance notably stronger than these synthetic averages suggest.
In Barony, the GPU’s role becomes clear in the 4K results. At 4K Ultra, the average FPS falls to 64.6, which is the only measured value below 90 FPS across the entire dataset. The 4K High result of 94.9 FPS and 4K Medium of 108.2 FPS show that even at 4K, the GPU handles medium presets comfortably, but Ultra pushes it to its limit. The 16 GB VRAM is not a constraint in this title, as Barony is a roguelike with relatively simple textures and geometry; the GPU’s raw compute power, measured at 36.13 TFLOPS FP32, is more relevant. The RDNA 4.0 architecture with 3584 shading units and 128 ROPs provides ample fill rate for the game’s demands.
The GPU’s performance scaling from 1080p to 4K is consistent with its memory bandwidth and pixel rate. The 322.6 GPixel/s pixel rate and 564.5 GTexel/s texture rate allow it to handle high resolutions without dramatic frame drops until Ultra settings are applied. The measured 4K Low result of 148.8 FPS indicates that even at the highest resolution, the GPU is not the limiting factor when settings are reduced; the CPU can still generate frames faster than the GPU renders them. This suggests that in Barony, the RX 9070 is overprovisioned for the game’s demands at lower settings, and only Ultra at 4K truly stresses its capabilities.
Measured FPS Breakdown
The full dataset provides a comprehensive view of performance across 12 configurations. At 1920x1080, the average FPS values are 419.4 (Low), 331.1 (Medium), 282.8 (High), and 204.2 (Ultra). The spread from Low to Ultra is 215.2 FPS, with each step up in settings costing roughly 50-80 FPS. The 1080p Low figure of 419.4 FPS is the highest measured value in the entire dataset, indicating that the CPU-GPU combination can exceed 400 FPS when the GPU workload is minimal.
At 2560x1440, the averages are 277.3 (Low), 205.6 (Medium), 176 (High), and 126.2 (Ultra). The drop from 1080p to 1440p is most pronounced at Low settings (419.4 to 277.3, a 33.9% reduction) and least pronounced at Ultra (204.2 to 126.2, a 38.2% reduction, which is similar in percentage terms). The 1440p results are all above 120 FPS, making this resolution the sweet spot for high-refresh-rate displays.
At 3840x2160, the averages are 148.8 (Low), 108.2 (Medium), 94.9 (High), and 64.6 (Ultra). The 4K Ultra result is the only one below 90 FPS, and the 4K High result of 94.9 FPS is just above that threshold. The transition from 1440p to 4K costs between 42.2% (Low: 277.3 to 148.8) and 48.8% (Ultra: 126.2 to 64.6) of the frame rate. These percentages are relatively consistent across settings, indicating that the resolution increase imposes a uniform scaling penalty on the GPU regardless of preset.
How This Combo Ranks
The combination of the AMD Ryzen 5 2600 and AMD Radeon RX 9070 ranks 582nd out of 1702 tested combos in Barony, placing it in the 65.8th percentile of all tested configurations (since 582/1702 = 0.342, meaning it outperforms 65.8% of combos). This rank is notable because the GPU is a high-end part (79th percentile among all GPUs), while the CPU is more mid-range (77th percentile among all CPUs). The rank suggests that in Barony, the CPU’s relatively modest single-thread performance (Cinebench R23 single-core score of 1579) prevents the combo from reaching the top tier, despite the GPU’s strength.
The rank of 582 out of 1702 is better than the GPU’s percentile alone would suggest, which indicates that Barony is not heavily GPU-bound at most settings. The measured FPS at 1080p Low (419.4) is exceptional, and even at 4K Ultra (64.6) the result is playable. The combo’s rank would likely be higher if the CPU were more capable of sustaining frame rates above 400 FPS, but at standard display refresh rates (144 Hz or less), the performance is more than sufficient. For a game released in 2015 with a roguelike genre, this hardware is substantially overqualified, and the ranking reflects that the bottleneck is almost entirely the CPU at lower resolutions. The data shows that this combo delivers high frame rates across all tested configurations, with the only caveat being the 4K Ultra result, which still remains above 60 FPS.
Hardware Specifications
AMD Ryzen 5 2600
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 9070 in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 148.8 |
| 3840x2160 | Medium | 108.2 |
| 3840x2160 | High | 94.9 |
| 3840x2160 | Ultra | 64.6 |
| 2560x1440 | Low | 277.3 |
| 2560x1440 | Medium | 205.6 |
| 2560x1440 | High | 176.0 |
| 2560x1440 | Ultra | 126.2 |
| 1920x1080 | Low | 419.4 |
| 1920x1080 | Medium | 331.1 |
| 1920x1080 | High | 282.8 |
| 1920x1080 | Ultra | 204.2 |
Barony with Ryzen 5 2600 + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 9070 + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.