Archeage

Archeage

AVERAGE FPS
91
good

This combination provides smooth gameplay with an average of 91 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 42 62 70
1440p QHD 51 74 109 122
1080p Full HD 75 110 162 182

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 70
3840x2160 Medium 62
3840x2160 High 42
3840x2160 Ultra 29
2560x1440 Low 122
2560x1440 Medium 109
2560x1440 High 74
2560x1440 Ultra 51
1920x1080 Low 182
1920x1080 Medium 162
1920x1080 High 110
1920x1080 Ultra 75

Archeage with Intel Core Ultra 5 235 + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

# Archeage with Intel Core Ultra 5 235 + NVIDIA GeForce RTX 3070 Ti

The benchmark data for Archeage with this Intel Core Ultra 5 235 and NVIDIA GeForce RTX 3070 Ti combination reveals a system that scales predictably across resolutions, with the GPU clearly becoming the limiting factor as pixel count rises. This pairing sits at rank 969 out of 2761 tested combos in this game, placing it in the upper-middle tier of all configurations measured. The measured FPS rows show a wide performance envelope, from a demanding 29 FPS at 4K Ultra to a fluid 182 FPS at 1080p Low, suggesting the game's engine responds strongly to both resolution and settings changes.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, indicating a system where the GPU workload dominates at higher resolutions. At High settings, the average FPS falls from 110 at 1080p to 74 at 1440p, then to 42 at 4K — a reduction of 33% from 1080p to 1440p and another 43% from 1440p to 4K. This progressive decline points to the RTX 3070 Ti's 8 GB GDDR6X memory and 256-bit bus being pushed harder as resolution increases, with the 608.3 GB/s bandwidth becoming a bottleneck at 4K.

The Low settings row tells a similar story but with higher absolute numbers. At 1080p Low, the system delivers 182 FPS, which drops to 122 at 1440p and 70 at 4K. The percentage drop from 1080p to 4K at Low is roughly 62%, which is slightly less severe than the 62% drop at High (from 110 to 42), suggesting that at lower settings the CPU has more headroom to feed the GPU. However, the fact that even at Low settings 4K only reaches 70 FPS indicates the GPU is still the primary constraint.

Medium settings show the most complete data with min and max FPS values, providing insight into frame time consistency. At 1080p Medium, the average is 162 FPS with a range from 138 to 186. At 1440p Medium, the average drops to 109 FPS with a range of 93 to 125. At 4K Medium, the average falls to 62 FPS with a range of 53 to 72. The consistency of the frame range — roughly a 30% spread between min and max at each resolution — suggests stable performance without severe stuttering, but the scaling pattern confirms that 4K is where this combo struggles to maintain high refresh rates.

Ultra settings illustrate the most dramatic resolution sensitivity. From 75 FPS at 1080p to 51 FPS at 1440p to 29 FPS at 4K, the drop is severe, representing a 61% reduction from 1080p to 4K. This suggests that Ultra settings introduce effects that disproportionately tax the GPU's 6144 shading units and 192 texture mapping units, making 4K Ultra effectively unplayable for smooth gameplay while 1080p Ultra remains viable.

GPU Role

The RTX 3070 Ti's specifications directly explain the observed scaling behavior. With 8 GB of GDDR6X memory on a 256-bit bus, the card delivers 608.3 GB/s of bandwidth, which is substantial but not sufficient for 4K Ultra in this MMORPG. The GPU's boost clock of 1770 MHz and base clock of 1575 MHz provide the raw compute power, with 21.75 TFLOPS of FP32 performance and 169.9 GPixel/s pixel rate, yet the 29 FPS at 4K Ultra shows that even this throughput is overwhelmed by the combination of high resolution and maximum settings.

The GPU's 75th percentile ranking among all GPUs, with an average benchmark score of 29945, places it in a competitive position. Its nearest rivals include the RTX 5070 Mobile (0.1% higher), RX 6800 (0.5% higher), RTX 2080 Ti (0.5% lower), and RX 6700 (1.6% lower). This tight clustering around the 30000 benchmark score mark suggests the RTX 3070 Ti is a well-balanced mid-range performer, but for Archeage at 4K, the data indicates that the 8 GB memory capacity is the critical limitation.

The VRAM usage pattern can be inferred from the scaling between settings. At 4K, the gap between Low (70 FPS) and Medium (62 FPS) is only 11%, while the gap between Medium and High (42 FPS) is 32%, and between High and Ultra (29 FPS) is 31%. This nonlinear scaling suggests that High and Ultra settings require more than the available memory bandwidth or capacity, causing the GPU to hit a wall. The 1188 MHz memory clock (19 Gbps effective) is fast, but the 256-bit bus width means the card cannot access enough data per cycle for 4K high-fidelity rendering.

The RTX 3070 Ti's 48 ray tracing cores and 192 tensor cores are present but not directly relevant to this game's measured results, as the FPS data does not indicate ray tracing workloads. Instead, the traditional rasterization performance, driven by the 6144 shading units and 96 ROPs, is what determines these scores. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are the metrics that matter for Archeage's rendering, and they explain why 1080p performance is strong while 4K performance degrades.

How This Combo Ranks

This specific CPU-GPU combination ranks 969 out of 2761 tested combos in Archeage, placing it in the 65th percentile of all combinations tested. This rank reflects a balanced pairing where the CPU's strong single-thread performance complements the GPU's mid-range capabilities, but the overall position is held back by the GPU's limitations at higher resolutions.

The CPU's percentile vs all CPUs is 89, with an average benchmark score of 46062, which is significantly higher than the GPU's 75th percentile. This mismatch suggests the CPU has more headroom than the GPU in this game, meaning the RTX 3070 Ti is more likely to be the performance ceiling. The CPU's nearest rivals — the AMD Ryzen AI 9 HX 375 (0.1% higher), Intel Core i9-13900HX (0.1% lower), AMD EPYC 4364P (0.2% higher), and AMD EPYC 7303 (0.2% higher) — all cluster within 0.2% of its average score, indicating the Core Ultra 5 235 is right at the expected performance level for its class.

The combo rank of 969 out of 2761 means there are 1792 other combinations that score higher in this game. This suggests that while the RTX 3070 Ti is a capable GPU, pairing it with a higher-end GPU would yield better results in Archeage, particularly at 1440p and 4K. The data shows that the GPU's nearest rivals in benchmark scores — the RTX 5070 Mobile and RX 6800 — would likely produce similar or slightly better in-game performance, confirming that this combo sits in a competitive but not top-tier position.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend heavily on the target resolution and desired frame rate. At 1080p, Medium settings provide an excellent balance with 162 FPS average and a tight range of 138 to 186 FPS, making it the best choice for high-refresh-rate monitors. High settings at 1080p still deliver 110 FPS, which is playable for most users, while Ultra at 75 FPS is acceptable for those prioritizing visual quality over frame rate.

At 1440p, Medium settings again emerge as the sweet spot with 109 FPS average and a range of 93 to 125 FPS. High settings at 74 FPS are borderline for smooth gameplay, while Ultra at 51 FPS may be too low for competitive play but acceptable for casual exploration. Low settings at 122 FPS provide the highest frame rate but sacrifice visual fidelity.

At 4K, the picture changes dramatically. Medium settings at 62 FPS are the only configuration that approaches playability, with Low at 70 FPS being the highest frame rate available. High at 42 FPS and Ultra at 29 FPS are both below the threshold for smooth gameplay, making 4K a challenging resolution for this combo unless the user accepts significant visual compromises.

The data suggests that Medium settings provide the best experience across all resolutions, offering a balance between visual quality and performance. The min FPS values at Medium — 138 at 1080p, 93 at 1440p, and 53 at 4K — indicate that even in demanding scenes, the frame rate stays above 50 FPS, which is crucial for maintaining playability in an MMORPG where large groups of players can cause frame drops.

Measured FPS Breakdown

At 1920x1080, the measured FPS values show a clear progression across settings. Low settings deliver 182 FPS average, which is the highest measured score for this combo in any configuration. Medium settings drop to 162 FPS with a range of 138 to 186 FPS, while High settings reach 110 FPS. Ultra settings bring the average down to 75 FPS, which is still playable but represents a 59% reduction from Low settings.

At 2560x1440, the performance scales down proportionally. Low settings achieve 122 FPS, Medium settings hit 109 FPS with a range of 93 to 125 FPS, High settings manage 74 FPS, and Ultra settings fall to 51 FPS. The gap between Low and Ultra at 1440p is 58%, similar to the 1080p gap, indicating consistent scaling behavior.

At 3840x2160, the performance drops significantly. Low settings still manage 70 FPS, but Medium settings fall to 62 FPS with a range of 53 to 72 FPS. High settings drop to 42 FPS, and Ultra settings reach just 29 FPS. The gap between Low and Ultra at 4K is 59%, nearly identical to the other resolutions, but the absolute values are much lower, confirming that 4K is the resolution where this combo's GPU becomes the limiting factor.

The Medium settings rows are the only ones with complete min and max FPS data, providing insight into frame time stability. At all three resolutions, the range between min and max is substantial — roughly 30% of the average — which suggests that Archeage's engine has variable scene complexity that causes frame rate fluctuations. However, the fact that even the minimum FPS at 1440p Medium (93 FPS) is above 60 FPS indicates that this combo can maintain smooth gameplay at that resolution for most situations.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The data shows 1080p Medium delivers 162 FPS average with a range of 138 to 186 FPS, making it the most fluid experience. For higher fidelity, 1440p Medium at 109 FPS is also excellent, while 4K is only viable at Low (70 FPS) or Medium (62 FPS) settings.

Q: Why does 4K Ultra only reach 29 FPS?

A: The 8 GB GDDR6X memory and 608.3 GB/s bandwidth of the RTX 3070 Ti become bottlenecks at 4K with maximum settings. The GPU's 6144 shading units and 96 ROPs cannot keep up with the pixel workload at that resolution and quality level.

Q: How does this CPU compare to similar processors?

A: The Intel Core Ultra 5 235 has an average benchmark score of 46062, which is 0.1% higher than the AMD Ryzen AI 9 HX 375 and 0.1% lower than the Intel Core i9-13900HX. It also sits 0.2% above the AMD EPYC 4364P and EPYC 7303.

Q: Is the GPU or CPU the limiting factor in this game?

A: The data indicates the GPU is the limiting factor, especially at higher resolutions. The CPU ranks in the 89th percentile while the GPU ranks in the 75th, and the FPS drops dramatically from 1080p to 4K regardless of settings, which is characteristic of GPU-bound performance.

Q: What settings provide the most stable frame rates?

A: Medium settings offer the most consistent performance, with min FPS values of 138 at 1080p, 93 at 1440p, and 53 at 4K. The range between min and max FPS is similar across resolutions, indicating predictable frame times.

Q: How does this combo rank among all tested configurations?

A: This combination ranks 969 out of 2761 tested combos in Archeage, placing it in the upper-middle tier. The GPU's nearest rivals include the RTX 5070 Mobile (0.1% higher benchmark score) and RX 6800 (0.5% higher), suggesting similar in-game performance.

CPU Role

The Intel Core Ultra 5 235 provides 14 cores and 14 threads, with a base clock of 3.40 GHz and a boost clock of 5.00 GHz. This 14-core configuration, based on the Arrow Lake architecture, delivers strong multi-threaded performance with a Cinebench R23 multi-core score of 14769 and a single-core score of 2085. The 24 MB of shared L3 cache and 3 MB per-core L2 cache help feed the GPU with data, and the 102.4 GB/s memory bandwidth over dual-channel DDR5 provides sufficient throughput for game data.

The CPU's 89th percentile ranking among all CPUs, with an average benchmark score of 46062, indicates it is a high-performing processor. Its nearest rivals in average score are all within 0.2%, showing that this chip performs exactly as expected for its class. The PassMark multi-thread score of 37816 and single-thread score of 4516 illustrate a strong balance between single-thread and multi-thread capabilities, which is important for an MMORPG like Archeage that may have varying CPU demands depending on player count and zone complexity.

In Archeage, the CPU's role appears to be secondary to the GPU based on the resolution scaling data. At 1080p Low, the 182 FPS average suggests the CPU can feed the GPU efficiently, but at 4K Ultra, the 29 FPS average shows the GPU is overwhelmed regardless of CPU capability. The CPU's 3 nm process node and 65 W TDP make it an efficient processor, but the benchmark data does not indicate any CPU-specific bottlenecks in this game, as the FPS scales consistently with resolution and settings changes.

The CPU's 14 threads (one per core) without hyper-threading means it relies on physical cores for processing, which is adequate for gaming workloads. The 5.00 GHz boost clock provides excellent single-thread performance, as evidenced by the Cinebench R23 single-core score of 2085, which is critical for maintaining high frame rates in games that are not fully multi-threaded. The PassMark data compression score of 390711 and encryption score of 29293 further demonstrate the CPU's processing power, though these are less relevant to gaming performance than the core and clock specifications.

Hardware Specifications

Intel Core Ultra 5 235

Cores / Threads 14 / 14
Base Clock 3400 MHz
Boost Clock 5000 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 235 + NVIDIA GeForce RTX 3070 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 70.0
3840x2160 Medium 62.0
3840x2160 High 42.0
3840x2160 Ultra 29.0
2560x1440 Low 122.0
2560x1440 Medium 109.0
2560x1440 High 74.0
2560x1440 Ultra 51.0
1920x1080 Low 182.0
1920x1080 Medium 162.0
1920x1080 High 110.0
1920x1080 Ultra 75.0

Archeage with iUltra 5 235 + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 3070 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with iUltra 5 235 + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.