Archeage

How This Combo Ranks

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 4080 SUPER achieves a combo rank of 108 out of 1,727 tested configurations in Archeage. This places the pairing in the top 6.3% of all recorded combos, which is a strong showing for a game originally released in 2014. The rank reflects the combined capability of both components within the specific workload Archeage presents, which is notable given the game's age and its tendency to behave differently from modern titles.

Benchmark results indicate the combo is not merely adequate but genuinely competitive, sitting far above the median tested system. The CPU alone holds a percentile rank of 94 against all CPUs in the database, while the GPU sits at the 88th percentile against all GPUs. Neither component is a weak link, and the 108th-place ranking out of 1,727 combos suggests the pairing is well-balanced for this specific MMORPG's demands, avoiding the severe bottlenecks that plague less harmonious configurations.

GPU Role

The NVIDIA GeForce RTX 4080 SUPER brings 16 GB of GDDR6X memory on a 256-bit bus, delivering a memory bandwidth of 736.3 GB/s. The GPU's base clock runs at 2295 MHz with a boost clock of 2550 MHz, and its 10,240 shading units process geometry and pixel data at a pixel rate of 285.6 GPixel/s. For Archeage, a title that is not typically considered a current-generation graphics showcase, this GPU provides an enormous amount of headroom.

The measured frames per second data reveals that the RTX 4080 SUPER is rarely the limiting factor until resolution and settings are pushed to extremes. At 1080p Low, the combo produces 269.4 FPS, which is more than sufficient for any display. The GPU's compute performance, measured at 19,822 in Passmark's GPU compute test, indicates that even when the game's draw calls and particle effects become demanding, the card has ample spare capacity. Its overall 3D performance score of 34,245 in Passmark G3D places it just 0.2% ahead of the AMD Radeon RX 6900 XT, a close rival, yet the NVIDIA card's architectural advantages in driver overhead and geometry processing appear to benefit Archeage's particular engine.

Resolution Scaling

The data shows a predictable yet telling pattern in frame rate scaling across resolutions. At 1080p Low, the combo delivers 269.4 FPS. Moving to 1440p Low, that figure drops to 179 FPS, a 33.6% reduction. At 4K Low, the average falls to 103.5 FPS, which is a 61.6% decrease from the 1080p result. These drops indicate that the GPU is becoming progressively more stressed as pixel count increases, but the CPU is still keeping pace.

The scaling behavior changes dramatically when settings are raised. At Ultra settings, the 1080p result is 108.7 FPS, which drops to 73.3 FPS at 1440p (a 32.6% reduction) and then to 40.5 FPS at 4K (a 62.7% reduction from 1080p). The similarity in percentage drops across Low and Ultra presets suggests that resolution scaling is consistent, but the absolute frame rates at Ultra are much lower. This points to a GPU-bound scenario at higher settings, particularly at 4K Ultra where the 40.5 FPS average falls below the 60 FPS threshold that most users consider playable. At 4K High, the average of 63.8 FPS is just above that threshold, indicating that the GPU's 16 GB VRAM and 736.3 GB/s bandwidth are sufficient for the game's texture loads, but the shading workload becomes prohibitive at Ultra.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The data shows that 1440p High yields 109.2 FPS on average, which is well above playable thresholds while maintaining visual quality. 4K High is also viable at 63.8 FPS, but the margin above 60 FPS is slim.

Q: How does the RTX 4080 SUPER compare to its nearest rival in this context?

A: The RTX 4080 SUPER's average benchmark score of 53,610 is 0.2% higher than the AMD Radeon RX 6900 XT's 53,489, and 2.9% higher than the NVIDIA GeForce RTX 5070 Ti's 52,086. This margin is small in synthetic tests, but the measured in-game results reflect the NVIDIA card's strengths.

Q: Is the Core i7-14700F a bottleneck at 1080p?

A: At 1080p Low, the combo hits 269.4 FPS, and at 1080p Medium it achieves 240.3 FPS. These high frame rates suggest the CPU's 20 cores and 28 threads, with a boost clock of 5.40 GHz, are sufficient to feed the GPU at lower resolutions.

Q: What happens to performance at 4K Ultra?

A: The average frame rate drops to 40.5 FPS, which is below the 60 FPS standard. The GPU becomes the limiting factor here, as the pixel workload at 3840x2160 with Ultra settings overwhelms the 10,240 shading units.

Q: How does the CPU's single-thread performance factor into Archeage?

A: The CPU's Cinebench R23 single-core score is 5,003, and its Passmark single-thread score is 4,261. Archeage, as an older MMORPG, relies heavily on single-thread performance for game logic and network handling, and these scores indicate strong capability in that regard.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 1440p Low, the average is 179 FPS, while at 1440p Ultra it drops to 73.3 FPS. This represents a 59.1% reduction, showing that the Ultra preset's additional effects have a significant cost on this hardware.

Settings Recommendations

The measured data provides clear guidance for optimizing the experience. At 4K, the High preset delivers 63.8 FPS, which is just above the 60 FPS target. Choosing Ultra at 4K drops performance to 40.5 FPS, a 36.5% reduction that is not justifiable given the marginal visual improvements typical of an older MMO. Therefore, for 4K displays, High settings are the appropriate choice.

For 1440p, the High preset yields 109.2 FPS, which is excellent for smooth gameplay. The Medium preset offers 158.5 FPS, and Low reaches 179 FPS, but the jump from Medium to High is only a 31.1% reduction in frame rate while providing substantially better visual fidelity. At 1080p, even Ultra is playable at 108.7 FPS, though High at 159.9 FPS is the sweet spot for users who prioritize both visuals and high refresh rates. The Ultra preset at 1080p incurs a 32.0% performance penalty compared to High, making High the recommended preset across all resolutions when considering the balance between image quality and frame rate.

CPU Role

The Intel Core i7-14700F is a 20-core, 28-thread processor based on the Raptor Lake architecture, manufactured on Intel's 10 nm process. Its base clock is 2.10 GHz, boosting up to 5.40 GHz, and it carries 33 MB of shared L3 cache alongside 2 MB of L2 cache per core. For Archeage, which is an older title not optimized for massive multi-threading, the CPU's strong single-core performance is crucial. The Cinebench R23 single-core score of 5,003 and the Geekbench single-core score of 2,711 demonstrate that the processor can handle the game's primary thread efficiently.

The CPU's multi-core capability, reflected in a Cinebench R23 multi-core score of 35,443 and a Passmark multithread score of 41,765, ensures that background tasks and the game's auxiliary threads do not cause stuttering. However, the measured frame rates at lower resolutions, such as 269.4 FPS at 1080p Low, suggest that the CPU is not the bottleneck in most scenarios. The processor's nearest rival, the AMD Ryzen 9 9900X, has an average benchmark score of 54,450, which is 0.6% higher than the i7-14700F's 54,097 average. This close margin indicates that the two CPUs are effectively equivalent in overall throughput, but the Intel chip's high boost clock and single-thread performance are what matter most for Archeage's frame pacing.