Archeage

# How This Combo Ranks

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce RTX 5070 Ti places 123rd out of 1,727 tested combos in Archeage, putting it in the top 7.1% of all configurations evaluated. This is a strong showing for a 2014 MMORPG, where the combination of a 12-core Zen 5 processor and a Blackwell 2.0 graphics card clearly sits well above the median system. The rank reflects the combo's ability to push high frame rates across resolutions, though the data shows diminishing returns at higher settings, which the ranking captures through its aggregate scoring methodology.

Within the CPU's nearest rivals, the Ryzen 9 9900X posts an average benchmark score of 54,450, sitting 0.4% below the Ryzen 9 9900X3D's 54,681 and 0.7% above the Intel Core i7-14700F's 54,097. The Intel Core Ultra 5 245K and 245KF lead by 1.5% and 1.8% respectively, but these differences are marginal in real-world gaming scenarios. For Archeage specifically, the combo's rank suggests the CPU is not the limiting factor — the 9900X's 94th percentile standing among all CPUs reinforces that this processor has ample headroom for the game's demands.

The GPU contributes significantly to this ranking. The RTX 5070 Ti sits at the 87th percentile among all GPUs with an average benchmark score of 52,086, which places it nearly identical to the RTX 4080 (52,085, 0% delta) and just 0.8% behind the AMD Radeon RX 7700S (52,505). This near-parity with the previous generation's flagship-tier card explains why the combo performs so well in a game like Archeage, which relies heavily on raw rasterization throughput rather than ray tracing or AI features.

GPU Role

The RTX 5070 Ti brings 16 GB of GDDR7 memory on a 256-bit bus, delivering 896.0 GB/s of bandwidth. This memory configuration is substantial for Archeage, a game that can be demanding when large player populations and world events populate the screen simultaneously. The 16 GB capacity ensures that even at 4K resolution with high-detail textures, the GPU will not run into memory capacity limitations — a factor that becomes more relevant as MMORPGs accumulate years of content and texture updates.

Clock speeds are modest by modern standards: a 2,295 MHz base and 2,452 MHz boost. The GPU's 8,960 shading units, 280 TMUs, and 96 ROPs provide the computational foundation, yielding 43.94 TFLOPS of FP32 performance. For Archeage, the FP32 throughput is what drives the measured frame rates, as the game's engine was built well before the era of hardware ray tracing. The 70 RT cores and 280 tensor cores are present but largely idle in this title, making the card's rasterization capabilities the primary determinant of performance.

The measured FPS data illustrates the GPU's scaling across settings. At 3840x2160, the card delivers 102.1 FPS on Low settings but drops to 43.1 FPS on Ultra — a 59 FPS swing that shows the RTX 5070 Ti's headroom is tested by the most demanding preset. The 16 GB frame buffer allows the card to push through High settings at 4K with 62.6 FPS, which is playable but not ideal for competitive scenarios. At 2560x1440, the card shows more comfortable margins: 170.9 FPS on Low, 155.7 FPS on Medium, 108 FPS on High, and 70.9 FPS on Ultra. The 1080p results are uniformly high, ranging from 261 FPS on Low to 106.1 FPS on Ultra.

FAQ

Q: Is the RTX 5070 Ti's 16 GB VRAM sufficient for Archeage at 4K?

A: Yes. The measured data shows the card achieving 62.6 FPS at 4K High settings, and 102.1 FPS at 4K Low settings, indicating the 16 GB GDDR7 memory with 896.0 GB/s bandwidth is not a bottleneck at any tested preset.

Q: How does the Ryzen 9 9900X compare to its closest rivals for gaming?

A: The 9900X scores 54,450 on average, which is 0.4% below the Ryzen 9 9900X3D and 0.7% above the Intel Core i7-14700F. The Intel Core Ultra 5 245K and 245KF outperform it by 1.5% and 1.8%, respectively.

Q: What frame rates can this combo achieve at 1440p?

A: At 2560x1440, the measured results are 170.9 FPS on Low, 155.7 FPS on Medium, 108 FPS on High, and 70.9 FPS on Ultra. The High preset offers a strong balance for most players.

Q: Why does Ultra settings cause such a large performance drop compared to High?

A: At 4K, the drop from High (62.6 FPS) to Ultra (43.1 FPS) is 19.5 FPS, while at 1440p it falls from 108 to 70.9 FPS. The data suggests Ultra preset introduces rendering effects that heavily tax the GPU's 96 ROPs and 43.94 TFLOPS compute capacity.

Q: Is this combo better suited to 1080p or 1440p gaming for Archeage?

A: At 1080p, the combo exceeds 156 FPS on High and 230 FPS on Medium, while at 1440p it maintains 108 FPS on High. For high-refresh monitors, 1080p is the safer choice; for visual fidelity, 1440p High remains comfortably playable.

Q: How does the RTX 5070 Ti compare to the RTX 4080 in this context?

A: The RTX 5070 Ti's average benchmark score is 52,086, which is identical to the RTX 4080's 52,085 (0% delta). In Archeage, the performance would be effectively indistinguishable between these two cards.

Settings Recommendations

The measured FPS data provides clear guidance for optimal settings based on target refresh rates. At 1920x1080, the Ultra preset delivers 106.1 FPS, which is sufficient for 100 Hz displays, but the High preset at 156.2 FPS is better suited for 144 Hz monitors. Medium at 230.4 FPS covers 240 Hz displays, while Low at 261 FPS approaches the ceiling of most 1440p-class gaming panels. For 1080p, High offers the best visual quality per frame rate, as the jump from Medium to High costs 74.2 FPS but provides noticeably better textures and effects.

At 2560x1440, the recommendation shifts. High produces 108 FPS, which is ideal for 120 Hz monitors and maintains good visual fidelity. Medium at 155.7 FPS is the choice for 144 Hz or 165 Hz panels, though players must accept reduced detail. Ultra at 70.9 FPS is playable for 60 Hz displays but leaves little headroom for demanding world events. Low at 170.9 FPS is excessive for most 1440p monitors and sacrifices too much visual quality.

For 3840x2160, the data indicates that High settings at 62.6 FPS is the sweet spot for 60 Hz displays. Medium at 89.9 FPS allows for smoother motion on 90 Hz or 100 Hz panels, while Low at 102.1 FPS provides the highest frame rate but with minimal detail. Ultra at 43.1 FPS is not recommended for consistent play, as it falls below the 60 FPS threshold that most players consider the minimum for comfortable MMORPG gameplay. The recommendation is to prioritize High at 4K, Medium at 1440p for high-refresh, and High at 1080p for the best balance.

Measured FPS Breakdown

At 3840x2160, the RTX 5070 Ti and Ryzen 9 9900X deliver 102.1 FPS on Low settings, 89.9 FPS on Medium, 62.6 FPS on High, and 43.1 FPS on Ultra. The progression shows a 12.2 FPS drop from Low to Medium, a 27.3 FPS drop from Medium to High, and a 19.5 FPS drop from High to Ultra. The Ultra preset's 43.1 FPS is the only sub-60 result across all tested configurations, indicating that the 4K Ultra preset exceeds what this GPU can sustain in Archeage.

At 2560x1440, the results are 170.9 FPS on Low, 155.7 FPS on Medium, 108 FPS on High, and 70.9 FPS on Ultra. The gap between Medium and High is 47.7 FPS, the largest single-preset jump at this resolution, while the step from High to Ultra costs 37.1 FPS. The 1440p results show a 100 FPS difference between Low and Ultra, demonstrating the wide performance envelope this combo can span depending on player preference.

At 1920x1080, the card produces 261 FPS on Low, 230.4 FPS on Medium, 156.2 FPS on High, and 106.1 FPS on Ultra. These numbers are consistently above 100 FPS even at the highest preset. The Low to Medium drop is 30.6 FPS, Medium to High is 74.2 FPS, and High to Ultra is 50.1 FPS. The 1080p results indicate that this combo is overkill for standard 60 Hz monitors but well-suited for 240 Hz competitive play when settings are reduced.

CPU Role

The Ryzen 9 9900X provides 12 cores and 24 threads based on the Zen 5 architecture, built on a 4 nm process at TSMC. Its base clock of 4.40 GHz boosts to 5.60 GHz, with a 120 W TDP. For Archeage, an MMORPG that can spawn numerous NPCs and player characters in a single scene, the 12-core configuration ensures that background threads — such as network handling, UI updates, and world-state simulation — do not starve the main render thread. The 64 MB of shared L3 cache and 1 MB L2 per core provide fast access to frequently used game assets, while the 89.6 GB/s dual-channel DDR5 memory bandwidth supports smooth asset streaming.

The CPU's benchmark results reflect its gaming capability. The 3DMark single-thread score of 1,286 and 2-thread score of 2,519 indicate strong per-core performance, which matters for Archeage's primary game logic thread. The multi-threaded scores — 12,552 for 16 threads and 13,929 for max threads — show linear scaling, but the game is unlikely to utilize all 24 threads heavily. The Cinebench R23 scores of 6,555 single-core and 46,438 multi-core place this CPU well above the demands of a 2014 title.

The 94th percentile ranking among all CPUs confirms that the 9900X is not a bottleneck in this combo. The nearest rival data shows the 9900X3D is only 0.4% faster on average, suggesting that the additional 3D V-Cache (which this CPU lacks) would not meaningfully improve Archeage performance. The Intel Core i7-14700F trails by 0.7%, and the Core Ultra 5 parts lead by less than 2%, all within the margin of run-to-run variance. For Archeage specifically, the CPU's high single-thread throughput and ample cache are the key attributes, and the measured FPS data confirms the combo delivers consistently high frame rates across all resolutions and settings.