Archeage

The combination of the AMD Ryzen 7 9850X3D and the AMD Radeon RX 570 in ArcheAge produces a performance profile that is heavily constrained by the graphics card. The data shows a clear pattern: the CPU provides ample headroom, but the GPU’s 4 GB VRAM and GCN 4.0 architecture become the limiting factor at higher resolutions and settings. This analysis walks through the measured FPS data to determine the optimal experience, dissect scaling behavior, and contextualize the results against other tested combinations.

Settings Recommendations

Based on the measured FPS rows, the optimal experience for this combo in ArcheAge is achieved at 1920x1080 with Low settings, which delivers an average of 62 FPS. This is the only configuration in the entire dataset that reaches a 60 FPS threshold, making it the most fluid option for general gameplay. The jump from Low to Medium at 1080p costs 7 FPS (from 62 to 55), which is a moderate drop, but the Low preset provides a more consistent baseline. The High preset at 1080p averages 37 FPS, which is playable but noticeably less smooth, while Ultra at 1080p drops to 26 FPS, indicating a significant performance penalty for marginal visual gains.

At 2560x1440, the Low preset yields an average of 42 FPS, which is a substantial step down from the 1080p Low result. Medium at 1440p averages 37 FPS with a minimum of 32 and a maximum of 43, showing some frame-time variance. High at 1440p drops to 25 FPS, and Ultra falls to 17 FPS. The 3840x2160 resolution is generally not viable for this pairing: Low averages 24 FPS, Medium 21 FPS, High 14 FPS, and Ultra just 10 FPS. Given that the CPU is a top-tier Zen 5 part, the bottleneck is entirely on the GPU side, so lowering resolution and settings is the only way to achieve acceptable frame rates.

For users who prioritize visual fidelity over frame rate, Medium at 1080p is the recommended compromise, offering 55 FPS with a minimum of 47 FPS, which keeps gameplay mostly above the 45 FPS threshold. However, the data strongly suggests that the Low preset is the "best experience" for this hardware combination, as it is the only one that consistently reaches 60 FPS. The Ultra preset should be avoided entirely, as it produces sub-30 FPS results at every resolution.

FAQ

Q: What is the highest average FPS achieved by this CPU-GPU combo in ArcheAge?

A: The highest average FPS recorded is 62, which occurs at 1920x1080 with Low settings. This is the only measured configuration that reaches the 60 FPS mark.

Q: How does the combo perform at 3840x2160 with Ultra settings?

A: At 3840x2160 with Ultra settings, the combo averages 10 FPS. This is the lowest recorded score in the dataset, indicating that 4K Ultra is completely unplayable for this pairing.

Q: Is the Ryzen 7 9850X3D a bottleneck in ArcheAge?

A: No. The CPU has 8 cores, 16 threads, a base clock of 4.70 GHz, and a boost clock of 5.60 GHz. The FPS drops are consistent with GPU limitations, as the RX 570’s 4 GB VRAM and 224.0 GB/s bandwidth are insufficient for higher settings. The CPU’s benchmark scores (e.g., 22807 in Cinebench R23 multi-core) show no signs of holding back the GPU.

Q: What is the frame time variance like at 2560x1440 Medium settings?

A: At 2560x1440 Medium, the average FPS is 37, with a minimum of 32 and a maximum of 43. This indicates a range of 11 FPS between the minimum and maximum, suggesting some instability in frame delivery during demanding scenes.

Q: How does the RX 570 compare to its closest rivals in synthetic benchmarks?

A: The RX 570 has an average benchmark score of 28766. Its nearest rival, the AMD Radeon RX 6800M, scores 28874, which is 0.4% higher (deltaPct of -0.4). The AMD Radeon R9 M295X scores 28580, which is 0.7% lower (deltaPct of 0.7). This shows the RX 570 is closely matched with its direct competitors.

Q: What is the combo's rank among all tested combinations in ArcheAge?

A: The combo ranks 2647 out of 2761 tested combinations. This places it in the bottom 5% of all tested hardware pairings for this game.

Resolution Scaling

The data reveals a steep performance cliff as resolution increases, which is typical for a GPU-bound scenario. At Low settings, the average FPS drops from 62 at 1920x1080 to 42 at 2560x1440, a reduction of 20 FPS (or roughly 32%). Moving from 1440p to 3840x2160 at Low settings, the average FPS falls from 42 to 24, another 18 FPS drop (or about 43%). This pattern shows that the RX 570’s rendering throughput scales poorly with pixel count, as the 4 GB GDDR5 memory and 32 ROPs struggle to keep up with the increased workload.

At Medium settings, the scaling is similar but with lower absolute numbers: 55 FPS at 1080p, 37 FPS at 1440p, and 21 FPS at 4K. The drop from 1080p to 1440p is 18 FPS (33%), and from 1440p to 4K is 16 FPS (43%). This consistent ~33-43% drop per resolution step indicates that the GPU is the primary limiting component. The CPU’s performance is not a factor here, as the Ryzen 7 9850X3D’s 5.60 GHz boost clock and 96 MB of L3 cache provide more than enough compute headroom for ArcheAge’s MMORPG workloads.

The 4K results are particularly telling. Even at Low settings, the combo only manages 24 FPS, which is below the threshold for comfortable play. The gap between Low and Ultra at 4K is 14 FPS (from 24 to 10), showing that the GPU’s shading units (2048) and texture units (128) are overwhelmed by the combination of high resolution and detailed assets. The data suggests that 1080p is the only viable resolution for this pairing, and even then, users must accept lower settings to achieve acceptable frame rates.

Measured FPS Breakdown

1920x1080: The data shows a clear hierarchy across settings. Low averages 62 FPS, which is the best result in the entire dataset. Medium averages 55 FPS, with a minimum of 47 and a maximum of 63, indicating that the frame rate can dip below 50 FPS in heavy scenes. High averages 37 FPS, which is a significant drop from Medium, suggesting that the High preset introduces effects that strain the GPU’s 4 GB VRAM. Ultra averages 26 FPS, which is below the 30 FPS playability threshold for most users. The delta between Low and Ultra is 36 FPS, demonstrating that the GPU’s limited memory bandwidth (224.0 GB/s) is a major constraint.

2560x1440: At this resolution, Low averages 42 FPS, which is playable but not smooth. Medium averages 37 FPS, with a minimum of 32 and a maximum of 43, showing a narrower range than at 1080p. High averages 25 FPS, and Ultra averages 17 FPS. The drop from Low to Medium is only 5 FPS, but the drop from Low to Ultra is 25 FPS. This indicates that the higher settings at 1440p push the GPU beyond its comfortable operating range, likely due to the increased pixel load and texture memory usage.

3840x2160: The 4K results are uniformly poor. Low averages 24 FPS, Medium averages 21 FPS (with a minimum of 18 and a maximum of 24), High averages 14 FPS, and Ultra averages 10 FPS. The difference between Low and Ultra is 14 FPS, which is smaller in absolute terms than at lower resolutions, but the percentages are similar. The minimum FPS of 18 at Medium 4K shows that the frame rate can drop to near-unplayable levels even in less demanding scenes. The RX 570’s 4 GB VRAM is likely exhausted at this resolution, causing texture thrashing and severe performance degradation.

How This Combo Ranks

The combo ranks 2647 out of 2761 tested combinations in ArcheAge, placing it in the 96th percentile from the bottom. This is a very low position, reflecting the GPU’s age and limitations. The RX 570 is an end-of-life product from 2017, and its performance in a 2014 MMORPG like ArcheAge is hampered by its 4 GB VRAM and GCN 4.0 architecture. The CPU, however, is a modern flagship part from 2026, so the pairing is highly mismatched.

The rank indicates that the vast majority of other tested combos perform better in this game. This is not surprising given that the RX 570’s average benchmark score of 28766 places it in the 74th percentile of all GPUs, but its nearest rivals include the RX 6800M (scoring 28874, 0.4% higher) and the RX 470 (scoring 28996, 0.8% higher). These rivals are all close in synthetic benchmarks, but in real-world gaming, the RX 570’s older architecture and smaller VRAM buffer lead to worse results in modern titles.

The CPU’s high rank (92nd percentile of all CPUs) does not compensate for the GPU’s low rank. The combo’s overall position in ArcheAge is driven almost entirely by the GPU, as the game is not CPU-intensive enough to benefit from the Ryzen 7 9850X3D’s 8 cores and 16 threads. The data shows that the combo is firmly in the lower quartile of tested systems, making it a poor choice for this game at higher resolutions.

CPU Role

The AMD Ryzen 7 9850X3D is a Zen 5 part (Granite Ridge) with 8 cores, 16 threads, a base clock of 4.70 GHz, and a boost clock of 5.60 GHz. It has a 96 MB shared L3 cache, which is massive for a desktop CPU. In synthetic benchmarks, it scores 22807 in Cinebench R23 multi-core and 2228 in single-core, placing it in the 92nd percentile of all CPUs. Its nearest rivals include the Intel Xeon Platinum 8260M (0.1% higher avg score) and the Intel Core i9-14900 (0.5% higher avg score), showing that it is competitive with top-tier server and desktop parts.

In ArcheAge, the CPU’s role is to handle game logic, network processing, and NPC AI. The measured FPS data shows that the CPU is not a bottleneck: the frame rates drop consistently with resolution and settings, which is a GPU-limited pattern. The CPU’s high single-thread performance (2228 in Cinebench R23 single-core) ensures that it can feed the GPU with enough draw calls, but the RX 570’s 2048 shading units and 32 ROPs are unable to utilize this fully. The L3 cache and high boost clock are beneficial for MMORPGs with large player counts, but the GPU caps the overall experience. The data indicates that upgrading the GPU would yield significant FPS gains, while the CPU would remain a strong foundation.

GPU Role

The AMD Radeon RX 570 is an end-of-life product based on the Polaris 20 chip (GCN 4.0 architecture) with 2048 shading units, 128 TMUs, and 32 ROPs. It has 4 GB of GDDR5 memory on a 256-bit bus, providing 224.0 GB/s of bandwidth. Its base clock is 1168 MHz, with a boost clock of 1244 MHz. In synthetic benchmarks, it scores 880 in 3DMark Steel Nomad DX12 and 39349 in Geekbench Metal, placing it in the 74th percentile of all GPUs. Its nearest rivals are closely matched, with the RX 6800M being 0.4% faster and the R9 M295X being 0.7% slower.

In ArcheAge, the GPU’s limitations are clearly visible in the measured data. The 4 GB VRAM is the primary constraint, as higher settings at 1440p and 4K likely exceed this capacity, causing the performance cliffs observed. The GPU’s FP32 performance of 5.095 TFLOPS is adequate for 1080p, but the memory bandwidth of 224.0 GB/s becomes a bottleneck at higher resolutions. The data shows that the GPU is the sole limiting factor: even at Low settings, the frame rate drops by 32% from 1080p to 1440p and by 43% from 1440p to 4K, which is consistent with a GPU that cannot handle the pixel throughput. The card’s 150 W TDP and 450 W suggested PSU indicate it is a mid-range part, and its performance in this game reflects that status. For ArcheAge, the RX 570 can only deliver acceptable performance at 1080p with Low or Medium settings, and any attempt to push higher resolutions results in sub-30 FPS gameplay.