Archeage

The AMD Ryzen 7 3700X paired with the NVIDIA GeForce RTX 3070 Ti delivers a broad spread of frame rates in Archeage, ranging from a highly playable 177.7 FPS at 1080p Low to a demanding 27 FPS at 4K Ultra. This data reveals a system whose performance is heavily dictated by both resolution and graphical presets, with the balance between CPU and GPU load shifting dramatically across the tested configurations.

Resolution Scaling

The most striking observation in the measured data is how average frame rates collapse as resolution increases from 1920x1080 to 3840x2160. At the High preset, the system delivers 111.9 FPS at 1080p, which drops to 75.1 FPS at 1440p, and further to 45 FPS at 4K. This represents a performance degradation of approximately 60% from 1080p to 4K, a steep curve that strongly indicates the GPU is becoming the primary limiting factor at higher resolutions. The RTX 3070 Ti, with its 8 GB of GDDR6X memory and 608.3 GB/s bandwidth, is being increasingly saturated as pixel count quadruples from 1080p to 4K.

The pattern is even more pronounced at the Ultra preset. Here, the frame rate falls from 74 FPS at 1080p to 47.4 FPS at 1440p, and then plummets to 27 FPS at 4K. The Ultra preset's additional graphical demands interact poorly with the 4K resolution, creating a scenario where the GPU's compute and memory resources are overwhelmed. The delta between High and Ultra at 4K is particularly telling: 45 FPS versus 27 FPS, a 40% reduction in performance for the higher preset. This suggests that Ultra settings introduce effects that are disproportionately expensive at 4K resolution.

Conversely, the Low preset shows the smallest relative drop across resolutions, going from 177.7 FPS at 1080p to 122.1 FPS at 1440p and 72.7 FPS at 4K. This indicates that at Low settings, the CPU has more headroom to feed frames, and the scaling curve is less steep. The data suggests that for this MMORPG, the RTX 3070 Ti is well-suited for 1080p and 1440p gaming, but 4K gaming requires careful settings management to maintain acceptable frame rates.

CPU Role

The AMD Ryzen 7 3700X is a Zen 2 architecture processor with 8 cores and 16 threads, operating at a base clock of 3.60 GHz and a boost clock of 4.40 GHz. In synthetic benchmarks, it scores 19087 in Cinebench R23 multi-core and 2694 in single-core, with an average benchmark score of 28631. Its nearest rival, the Intel Core i5-12600, scores 28654, a delta of -0.1%, indicating the 3700X is essentially performance-equivalent to that chip in general compute tasks.

In the context of Archeage, the CPU's role becomes apparent when examining the frame rate scaling at lower resolutions. At 1080p, the frame rates are high across all presets, ranging from 74 FPS at Ultra to 177.7 FPS at Low. The fact that even the Low preset cannot exceed 177.7 FPS suggests a CPU limitation is in play, as the GPU is unlikely to be the bottleneck at such undemanding settings. The 3700X's 8-core, 16-thread configuration is adequate for the MMORPG's threading model, but its single-threaded performance, while respectable, appears to cap the maximum achievable frame rate.

The passmark data compression score of 296379 and floating-point math score of 39005 indicate strong general-purpose compute capability. However, Archeage, being a title from 2014, may not fully utilize all 16 threads, meaning the boost clock of 4.40 GHz becomes critical for maintaining high frame rates. The data shows that when the GPU is not stressed (at 1080p Low), the CPU's performance ceiling is reached, preventing frame rates from scaling beyond 177.7 FPS. This is a classic sign of a CPU-bound scenario in an older MMORPG, where the game logic and draw calls are processed serially.

Settings Recommendations

The measured data provides a clear hierarchy of presets, and the optimal choice depends on the target resolution and desired frame rate. At 1080p, the High preset offers an excellent balance at 111.9 FPS, while the Medium preset (165 FPS) and Low preset (177.7 FPS) provide even higher headroom. The Ultra preset at 1080p, at 74 FPS, is still playable but represents a significant performance hit for marginal visual gains.

For 1440p, the High preset at 75.1 FPS is the sweet spot, providing a smooth experience close to the 60 FPS threshold. The Medium preset at 107.4 FPS is also viable for players with high-refresh-rate monitors, while the Ultra preset at 47.4 FPS dips below the ideal threshold for fast-paced gameplay. The Low preset at 122.1 FPS is available for competitive play, but the visual compromise is substantial.

At 4K, the data strongly recommends the Low preset, which delivers 72.7 FPS. The Medium preset at 61.9 FPS is also acceptable, but the High preset at 45 FPS and Ultra at 27 FPS are not recommended for a consistent experience. The performance cost of High and Ultra at 4K is disproportionate to the visual improvements, especially in a game where clarity of character models and UI elements is paramount. For the best experience at 4K, players should start with Low settings and selectively increase options based on the observed 61.9 FPS Medium baseline.

How This Combo Ranks

In the global database of tested hardware combinations for Archeage, this specific pairing of the Ryzen 7 3700X and RTX 3070 Ti ranks 683 out of 1727 combos. This places it in the upper-middle tier of all tested configurations, indicating that it is a competent but not top-tier setup for this particular game. The rank of 683 suggests that while the hardware is capable, there are many other combinations that achieve higher frame rates, likely featuring more recent CPUs with higher single-threaded performance or GPUs with more VRAM and bandwidth.

The CPU's percentile of 85 versus all CPUs, and the GPU's percentile of 74 versus all GPUs, indicate that both components are above average. However, their synergy in Archeage is limited by the game's engine, which appears to be more sensitive to CPU single-thread speed than to raw multi-core throughput. The GPU's nearest rival, the AMD Radeon RX 6700, has a score delta of -0.8%, suggesting that the RTX 3070 Ti is slightly faster in synthetic benchmarks, but this margin does not necessarily translate to a better in-game ranking given the CPU constraints observed.

The rank of 683 out of 1727 means that roughly 60% of tested combos outperform this one in Archeage. This is a sobering statistic for a high-end GPU like the RTX 3070 Ti, but it reflects the reality that the older game engine does not scale well with modern hardware. The combo's performance is more competitive at 1080p, where the frame rates are high, but the ranking is likely dragged down by the poor 4K Ultra performance, which is a common benchmark metric.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with a GA104 chip, featuring 6144 shading units, 192 texture mapping units, and 96 render output units. It has 8 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 608.3 GB/s. The GPU's base clock is 1575 MHz with a boost clock of 1770 MHz, and it achieves a Passmark G3D score of 23356, placing it in the 74th percentile of all GPUs.

The GPU's role in Archeage is clearly demonstrated by the resolution scaling data. At 1080p, the GPU has ample headroom, as evidenced by the high frame rates at all presets, even Ultra at 74 FPS. The limiting factor at 1080p is the CPU, as discussed. However, as resolution increases to 1440p and 4K, the GPU becomes the primary bottleneck. The 4K Ultra score of 27 FPS is particularly revealing, as it shows the GPU's limits when pushed with maximum quality settings and a 4K framebuffer.

The 8 GB of VRAM is a potential concern at 4K Ultra, where texture sizes and rendering buffers can exceed this capacity. The measured 27 FPS at 4K Ultra likely reflects not only compute limitations but also potential memory pressure. The GPU's nearest rival, the AMD Radeon RX 6700, has a score delta of -0.8%, indicating the RTX 3070 Ti is slightly faster in synthetic tests. However, in Archeage, the GPU's performance is more than adequate for 1080p and 1440p gaming, with the High preset at 1440p yielding 75.1 FPS, a very playable result.

The data indicates that the RTX 3070 Ti is the dominant component in this system for higher resolutions, and its capabilities are best utilized when paired with the Medium or High presets at 1440p. The GPU's 21.75 TFLOPS of FP32 compute and 169.9 GPixel/s pixel rate are sufficient for the game's visual effects, but the 4K Ultra configuration pushes it beyond its comfort zone. For players targeting 4K, the Low preset is the only viable option that maintains frame rates above 60 FPS.