Archeage

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4070 Ti combination delivers a versatile experience in Archeage, with the most balanced experience found at High settings across all tested resolutions. This pairing places in the 89th percentile of tested configurations, ranking 187th out of 1727 combos, demonstrating strong overall capability for this MMORPG.

Settings Recommendations

The benchmark data shows a clear trade-off between visual fidelity and frame rate. High settings provide the best overall experience, as it maintains playable performance at every resolution while preserving visual quality. At 4K, High settings produce an average of 58 FPS, which is below the 60 FPS threshold for ideal smoothness but remains playable. At 1440p, High settings hit 102.3 FPS, and at 1080p, they reach 148.1 FPS, offering a substantial performance cushion.

Ultra settings are demanding, with 4K dropping to 39.6 FPS and 1440p at 70.4 FPS. While 1080p Ultra achieves 104.8 FPS, the visual upgrade over High does not justify the performance cost at higher resolutions. Medium settings provide a solid alternative, particularly at 4K where it reaches 82.5 FPS, but the step down in detail from High is noticeable.

Low settings deliver the highest frame rates — 245.1 FPS at 1080p, 168.2 FPS at 1440p, and 95.7 FPS at 4K — but this preset sacrifices the visual experience of the game. For most users, High settings represent the sweet spot: it is the only preset that maintains over 100 FPS at both 1080p and 1440p while still exceeding 55 FPS at 4K.

GPU Role

The RTX 4070 Ti features 12 GB of GDDR6X memory on a 192-bit bus with a bandwidth of 504.2 GB/s. The GPU operates at a base clock of 2310 MHz with a boost clock of 2610 MHz, built on the Ada Lovelace architecture with 7680 shading units and 80 ROPs. This hardware configuration is well-suited to Archeage's demands, as evidenced by the measured frame rates.

The GPU's memory capacity proves sufficient across all tested settings and resolutions. Even at 4K Ultra, where the frame rate drops to 39.6 FPS, the bottleneck appears to be raw compute rather than memory capacity, as the 12 GB allocation handles the game's textures without issue. The 504.2 GB/s bandwidth ensures that data transfer does not become a limiting factor, allowing the GPU to maintain consistent performance across different quality presets.

The GPU's transistor count of 35,800 million on a 294 mm² die provides substantial compute resources. The 40.09 TFLOPS of FP32 performance translates into strong rasterization capabilities, which is the primary workload in Archeage. The RTX 4070 Ti sits in the 85th percentile of all GPUs, with an average benchmark score of 44900, positioning it as a high-end solution that handles this MMORPG with room to spare.

How This Combo Ranks

The combination of the Ryzen 5 7500F and RTX 4070 Ti ranks 187th out of 1727 tested combos in Archeage. This places the pairing in the top 11% of all configurations, indicating that this hardware combination is well-matched for the game's requirements. The rank reflects the synergy between the CPU and GPU, where neither component significantly bottlenecks the other at most settings.

The CPU's average benchmark score of 24993 places it in the 82nd percentile of all processors. Its nearest rivals include the Intel Core i7-11850H with a deltaPct of 0.1, the AMD Ryzen 7 2700X at -0.3, and the AMD Ryzen 5 8400F at -0.3, showing that the 7500F sits in a tightly competitive performance band. The GPU's average score of 44900 puts it in the 85th percentile, with rivals including the GeForce RTX 5090 Mobile at -0.6 and the Intel Arc A730M at -1.5.

The 187th rank out of 1727 combos suggests that while this configuration is strong, there are many other pairings that achieve higher frame rates in Archeage. The data indicates that the combination is more than adequate for smooth gameplay at 1080p and 1440p, with 4K remaining playable at reduced settings.

Measured FPS Breakdown

At 1920x1080, the RTX 4070 Ti delivers exceptional performance across all presets. Low settings produce an average of 245.1 FPS, Medium reaches 219.2 FPS, and High achieves 148.1 FPS. Ultra settings drop to 104.8 FPS, still comfortably above the 100 FPS threshold for high-refresh-rate monitors.

Moving to 2560x1440, frame rates remain strong. Low settings hit 168.2 FPS, Medium reaches 148.8 FPS, and High manages 102.3 FPS. Ultra settings fall to 70.4 FPS, which is playable but noticeably lower than lower presets. The scaling from 1080p to 1440p shows a 31.4% drop at Low settings, a 32.1% drop at Medium, a 30.9% drop at High, and a 32.8% drop at Ultra.

At 3840x2160, the GPU begins to show its limits. Low settings average 95.7 FPS, Medium hits 82.5 FPS, and High drops to 58 FPS. Ultra settings plummet to 39.6 FPS, making this preset impractical at 4K. The 4K results show a 61.0% reduction from 1080p at Low settings, 62.4% at Medium, 60.8% at High, and 62.2% at Ultra, indicating consistent scaling behavior across presets.

Resolution Scaling

The frame rate drops from 1080p to 4K reveal the nature of the performance bottleneck. Across all settings, the reduction from 1080p to 1440p averages around 31.6%, while the drop from 1440p to 4K averages an additional 43.5%. The consistency of these percentages across different quality presets indicates that the GPU is the primary limiting factor at higher resolutions.

At Low settings, 1080p yields 245.1 FPS, 1440p drops to 168.2 FPS, and 4K falls to 95.7 FPS. The corresponding percentages show a 31.4% drop from 1080p to 1440p and a 43.1% drop from 1440p to 4K. At Ultra settings, 1080p produces 104.8 FPS, 1440p drops to 70.4 FPS, and 4K falls to 39.6 FPS, with reductions of 32.8% and 43.8%, respectively.

The proportional scaling suggests that the CPU is not a bottleneck at these resolutions. If the CPU were limiting performance, the frame rate drops would be less severe at higher resolutions where GPU load increases. Instead, the consistent ~30% drop from 1080p to 1440p and ~43% drop from 1440p to 4K across all settings points to the GPU's rendering capabilities as the limiting factor.

CPU Role

The AMD Ryzen 5 7500F provides 6 cores and 12 threads based on the Zen 4 architecture. Operating at a base clock of 3.70 GHz with a boost clock of 5.00 GHz, this processor delivers strong single-threaded performance, which is crucial for MMORPGs like Archeage that often rely on a few heavily utilized threads. The 32 MB of shared L3 cache aids in reducing memory latency for frequently accessed game data.

The CPU's benchmark results demonstrate its capabilities. In Cinebench R23, it scores 22799 in multicore and 3218 in single-core tests. Geekbench results show 12686 in multicore and 2759 in single-core performance. The 3DMark results indicate strong scaling from 2 threads (1902) to 4 threads (3621) to 8 threads (5372), with a near-plateau at 16 threads (6376) and max threads (6379), suggesting that the 6-core configuration is well-utilized.

The CPU's performance relative to its rivals shows it is a competitive option. With an average benchmark score of 24993, it sits within 0.3% of the AMD Ryzen 7 2700X and AMD Ryzen 5 8400F, and within 0.1% of the Intel Core i7-11850H. The 65W TDP and 5 nm process node make it an efficient choice, though the data does not directly measure power consumption in game scenarios.

FAQ

Q: What is the best resolution and settings combination for this hardware in Archeage?

A: High settings at 2560x1440 provide the best balance, achieving 102.3 FPS average. This delivers smooth gameplay while maintaining visual quality, as 4K High drops to 58 FPS and 1080p Ultra only reaches 104.8 FPS.

Q: How does the RTX 4070 Ti handle 4K gameplay in Archeage?

A: At 4K, the GPU delivers 95.7 FPS at Low settings, 82.5 FPS at Medium, and 58 FPS at High. Ultra settings are not recommended at 4K, as the average drops to 39.6 FPS, which falls below playable thresholds.

Q: Is the Ryzen 5 7500F a bottleneck for the RTX 4070 Ti in this game?

A: The frame rate scaling from 1080p to 4K shows consistent percentage drops across all settings, indicating the GPU is the limiting factor. The CPU's single-thread performance, evidenced by a Geekbench single-core score of 2759, is sufficient to keep up with the GPU's output.

Q: How does this combo rank compared to other tested configurations?

A: The combination ranks 187th out of 1727 tested combos, placing it in the top 11% of all configurations. This reflects a well-balanced pairing that performs strongly in Archeage.

Q: What is the difference between Low and Ultra settings at 1080p?

A: Low settings achieve 245.1 FPS, while Ultra settings drop to 104.8 FPS. This represents a 57.2% reduction in frame rate, illustrating the significant performance cost of maximum visual quality.

Q: Does the 12 GB VRAM on the RTX 4070 Ti cause any limitations in Archeage?

A: The measured results show no evidence of VRAM-related stuttering or performance drops. The 12 GB capacity with 504.2 GB/s bandwidth appears sufficient across all tested resolutions and settings, as frame rates scale consistently without unexpected dips.