Archeage

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4070 combination delivers a performance profile in Archeage that is heavily dictated by resolution and graphics presets. The benchmark data shows a clear scaling pattern from 1080p to 4K, with the most demanding settings exposing the GPU's limits while lower presets shift the bottleneck toward the processor.

Resolution Scaling

The measured FPS data reveals how this combo scales across the three primary resolutions. At 1920x1080 with Low settings, the system achieves 211 FPS on average. Moving to 2560x1440 Low drops that figure to 142 FPS, a reduction of approximately 33%. At 3840x2160 Low, the average falls further to 81 FPS, which is a 62% decrease from the 1080p Low result. This scaling pattern indicates that even at the lowest settings, the 4K resolution imposes a significant load that the RTX 4070 cannot fully overcome.

The Medium preset shows a similar trajectory. At 1080p Medium, the average is 187 FPS, with a minimum of 159 FPS and a maximum of 215 FPS. Stepping up to 1440p Medium yields 126 FPS average, with 107 FPS minimum and 145 FPS maximum. The 4K Medium result drops to 72 FPS average, with 61 FPS minimum and 83 FPS maximum. The gap between 1080p and 1440p Medium is roughly 33%, while the gap between 1440p and 4K Medium is about 43%. This suggests diminishing returns as resolution climbs, with the GPU becoming the primary constraint at 4K.

High settings follow the same pattern but with steeper declines. The 1080p High average is 127 FPS, which falls to 86 FPS at 1440p High (a 32% drop) and then to 49 FPS at 4K High (a 43% drop from 1440p). The Ultra preset is the most demanding, with 87 FPS at 1080p, 58 FPS at 1440p, and just 33 FPS at 4K. The 4K Ultra result is less than half of the 1080p Ultra figure, demonstrating that the combination of maximum settings and 4K resolution pushes the hardware well beyond comfortable playable territory.

The data indicates that the RTX 4070 is the limiting component at higher resolutions, particularly at 4K. The gap between 1080p and 1440p results is relatively consistent across presets, but the jump to 4K introduces a disproportionate penalty. This is typical of a GPU-bound scenario where pixel throughput becomes the bottleneck. At lower resolutions, the CPU's role becomes more prominent, as evidenced by the high frame rates that exceed what a purely GPU-limited system would produce.

GPU Role

The NVIDIA GeForce RTX 4070 is built on the Ada Lovelace architecture and features 12 GB of GDDR6X memory on a 192-bit bus, delivering a bandwidth of 504.2 GB/s. The GPU has a base clock of 1920 MHz and a boost clock of 2475 MHz, with memory running at 1313 MHz (21 Gbps effective). These specifications position it as a capable mid-to-high-range card, with an average benchmark score of 37648 and a percentile rank of 81 among all GPUs.

In Archeage, the GPU's memory capacity and bandwidth become relevant at higher resolutions and settings. The 12 GB VRAM is sufficient for the game's demands at 1080p and 1440p across all presets, as evidenced by the playable frame rates. At 4K, the memory bandwidth of 504.2 GB/s appears to be a factor, as the frame rates drop significantly compared to lower resolutions.

The boost clock of 2475 MHz helps maintain performance in GPU-bound scenarios, but the data shows that even with this clock speed, the card cannot sustain high frame rates at 4K with High or Ultra settings. The 4K Ultra average of 33 FPS is particularly telling, as it suggests the GPU is overwhelmed by the combination of high resolution and maximum graphical fidelity.

Comparing to nearest rivals, the RTX 4070's average benchmark score of 37648 places it 0.1% ahead of the NVIDIA Tesla P4 (37628) and 0.4% ahead of the AMD Radeon RX Vega 56 (37507). It trails the NVIDIA GeForce RTX 4080 Mobile by 1.3% (38135) and leads the AMD Radeon PRO W6400 by 1.3% (37157). These deltas are small, indicating that the RTX 4070 sits in a tight performance cluster, but the actual Archeage results show that its real-world performance in this specific game is influenced more by resolution and settings than by raw benchmark scores.

The GPU's transistor count of 35,800 million and die size of 294 mm², fabricated on a 5 nm process at TSMC, contribute to its efficiency, but the measured FPS data does not show exceptional scaling at 4K. The card's FP32 performance of 29.15 TFLOPS and texture rate of 455.4 GTexel/s are respectable, yet the 4K Ultra result suggests that the game's shading and pixel processing demands exceed what the GPU can deliver at that resolution.

How This Combo Ranks

The combination of the Ryzen 5 7500F and RTX 4070 achieves a rank of 863 out of 3708 tested combos in Archeage. This places it in the upper quartile of all combinations, with approximately 77% of combos performing worse. The rank reflects the system's ability to handle the game across various settings, balancing the CPU's strengths with the GPU's capabilities.

This rank is notable because Archeage is an MMORPG from 2014, and the combo's performance suggests that it is well-suited to the game's engine. The 863rd position out of 3708 indicates that there are many faster combinations, but also a substantial number of slower ones. The data shows that this combo is not at the top tier, but it is comfortably above the median, making it a solid performer for this title.

The rank is influenced by the combo's behavior across all measured resolutions and settings. At 1080p, the combo excels, with frame rates that compete with much more expensive hardware. At 4K, it falls behind, which pulls the overall rank down. The combination of high CPU performance and mid-range GPU power creates a balanced system that is strongest at 1440p, where it delivers 86 FPS on High settings, a result that is within the playable range for most users.

The deltaPct values from the CPU's nearest rivals provide context for the processor's contribution. The Ryzen 5 7500F's average benchmark score of 24964 is 0.1% above the Intel Core i7-11850H (24935), 0.2% above the Intel Core i7-13620H (24911), and 0.4% above the Intel Core 5 210H (24872). It trails the AMD Ryzen 5 8400F by 0.2% (25005). These tiny differences mean that the CPU is not the differentiator in this combo's rank; the GPU's performance at various resolutions is what drives the ranking.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. The Low preset averages 211 FPS, which is the highest measured frame rate across all configurations. Medium follows at 187 FPS, with a minimum of 159 FPS and a maximum of 215 FPS. High drops to 127 FPS, and Ultra falls to 87 FPS. All of these figures are well above the threshold for smooth gameplay, indicating that the combo is CPU-limited at this resolution, especially at Low and Medium where the GPU has headroom.

The 2560x1440 results show a step down. Low averages 142 FPS, Medium averages 126 FPS (with 107 FPS minimum and 145 FPS maximum), High averages 86 FPS, and Ultra averages 58 FPS. The 1440p Medium result is particularly interesting because it maintains a minimum of 107 FPS, which is still very playable. The High preset at 86 FPS is adequate for most users, while Ultra at 58 FPS approaches the edge of comfort for competitive play.

At 3840x2160, the combo struggles. Low averages 81 FPS, which is playable but not ideal for high-refresh displays. Medium averages 72 FPS, with a minimum of 61 FPS and a maximum of 83 FPS. High drops to 49 FPS, which is below the 60 FPS target that many users prefer. Ultra averages just 33 FPS, which is not suitable for smooth gameplay. The 4K results clearly show the GPU as the bottleneck, as the CPU's performance cannot compensate for the pixel throughput demands.

The data also shows a consistent pattern across presets: Low > Medium > High > Ultra at every resolution. The delta between Low and Medium is relatively small (24 FPS at 1080p, 16 FPS at 1440p, 9 FPS at 4K), while the delta between High and Ultra is larger (40 FPS at 1080p, 28 FPS at 1440p, 16 FPS at 4K). This suggests that the Ultra preset introduces a significant performance penalty that may not be justified by visual improvements.

Settings Recommendations

Based on the measured data, the Medium preset offers the best balance of performance and visual quality for this combo. At 1080p Medium, the average of 187 FPS with a minimum of 159 FPS ensures smooth gameplay even in crowded MMORPG scenarios. At 1440p Medium, the average of 126 FPS with a 107 FPS minimum is still excellent, providing a high-refresh experience without sacrificing too much visual fidelity. Even at 4K Medium, the 72 FPS average is playable, though the 61 FPS minimum suggests occasional dips.

The High preset is a viable alternative for users who prioritize visual quality over raw frame rate. At 1080p High, the 127 FPS average is strong, and at 1440p High, the 86 FPS average is acceptable for most players. However, at 4K High, the 49 FPS average is below the ideal threshold, so users should avoid this combination unless they can tolerate lower frame rates.

The Ultra preset is not recommended for this combo. At 1080p Ultra, the 87 FPS average is playable, but the 40 FPS drop from High is substantial. At 1440p Ultra, the 58 FPS average is borderline, and at 4K Ultra, the 33 FPS average is unplayable for most users. The visual improvements from Ultra likely do not justify the performance cost, especially at higher resolutions.

The Low preset, while delivering the highest frame rates (211 FPS at 1080p, 142 FPS at 1440p, 81 FPS at 4K), sacrifices too much visual quality for an MMORPG that benefits from seeing environmental details and character models. The data suggests that Medium is the sweet spot, offering a 48% improvement in frame rate over High at 1080p (187 vs 127 FPS) while maintaining a visually acceptable experience.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture (codenamed Raphael). It has a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with a TDP of 65 W. The CPU features 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. It supports DDR5 memory with a dual-channel bus and a bandwidth of 83.2 GB/s.

In Archeage, the CPU's role is most evident at lower resolutions and settings where the GPU is not the primary bottleneck. At 1080p Low, the 211 FPS average suggests that the CPU is capable of feeding the GPU with enough data to sustain very high frame rates. The single-thread performance, as measured by the 3DMark single-thread score of 974 and Cinebench R23 single-core score of 3218, is strong and likely contributes to the game's frame generation.

The CPU's multi-threaded performance is also relevant, as MMORPGs often have background tasks and processing demands. The Cinebench R23 multicore score of 22799 and Geekbench multicore score of 12362 indicate that the 6-core, 12-thread configuration can handle the game's workload without becoming a limiting factor. The PassMark multithread score of 26825 further supports this, showing that the CPU has sufficient parallel processing capability.

The Ryzen 5 7500F's average benchmark score of 24964 places it in the 77th percentile among all CPUs, with a 0.1% delta from the Intel Core i7-11850H and a 0.2% delta from the AMD Ryzen 5 8400F. These near-identical scores mean that the CPU is not a differentiator in this combo's performance; the GPU's capabilities at various resolutions are what determine the final frame rates.

The boost clock of 5.00 GHz is crucial for Archeage, which likely benefits from high single-thread performance. The data shows that at 1080p, the combo can achieve frame rates that are 2.4 times higher than at 4K with the same settings (e.g., 211 FPS vs 81 FPS at Low). This scaling suggests that at lower resolutions, the CPU's clock speed and IPC are sufficient to drive high frame rates, but at 4K, the GPU becomes the limiting factor regardless of CPU performance.

The CPU's 32 MB of L3 cache and DDR5 memory support with 83.2 GB/s bandwidth ensure that data can be fed to the cores without stalling, which is important for maintaining consistent frame times in a game like Archeage that may have large world data and many entities. However, the measured FPS data does not show any CPU-related stuttering or frame drops, with the Medium preset showing minimums of 159 FPS at 1080p, 107 FPS at 1440p, and 61 FPS at 4K, indicating stable performance across resolutions.