Archeage

The AMD Ryzen 5 3600 paired with the AMD Radeon RX 6750 XT delivers a broadly playable Archeage experience, but the data reveals a clear pattern: this combo is far more comfortable at 1080p and 1440p than at 4K. With a combo rank of 839 out of 1727 tested configurations, this setup sits in the middle of the pack, not a top-tier performer but hardly a slouch. The measured FPS numbers show that settings choices matter enormously, especially at higher resolutions where the GPU’s 12 GB VRAM and 432.0 GB/s bandwidth become decisive factors. Below is a breakdown of what the numbers mean for actual gameplay.

FAQ

Q: What is the best resolution to play Archeage with this combo?

A: Based on measured data, 1920x1080 is the sweet spot. At Low settings, the average FPS is 159.4, and even at High settings it stays above 99 FPS. At 2560x1440, High settings still deliver 66.1 FPS, which is playable, but 3840x2160 drops to 39.3 FPS at High, making 4K a stretch for smooth play.

Q: How does the RX 6750 XT’s VRAM affect Archeage performance?

A: The GPU has 12 GB of GDDR6 memory on a 192-bit bus, with a bandwidth of 432.0 GB/s. At 4K Ultra settings, the average FPS collapses to 25.2, suggesting that the memory subsystem is strained by the game’s highest preset at that resolution. Lowering settings to Medium at 4K brings FPS up to 58, which is a massive jump and indicates that VRAM capacity is not the bottleneck—rather, the memory bandwidth and GPU compute are.

Q: Is the Ryzen 5 3600 holding back this GPU in Archeage?

A: The CPU has 6 cores and 12 threads, with a base clock of 3.60 GHz and boost up to 4.20 GHz. Its Cinebench R23 multicore score is 15045 and single-core is 2124. In Archeage, the FPS gap between 1080p Low (159.4) and 1440p Low (110.5) is only about 44%, which suggests the CPU keeps up at lower resolutions, but the GPU becomes the limiting factor as resolution climbs. At 1080p High (99.5 FPS) vs 1080p Ultra (68 FPS), the drop is steep, pointing more to GPU load than CPU limits.

Q: What settings should I use for a 1440p monitor?

A: Medium settings at 2560x1440 yield 99 FPS average, while High drops to 66.1 FPS. For a 60 Hz display, High is fine; for higher refresh rates, Medium is the better choice. Ultra at 1440p falls to 43.2 FPS, which is not recommended for smooth gameplay.

Q: How does this combo compare to the nearest CPU rivals?

A: The Ryzen 5 3600’s average benchmark score is 18129, which is within 0.3% of the Intel Core i5-11400 (18150) and the AMD Ryzen 5 7535HS (18101). The Ryzen 5 1600 scores 18158, a 0.2% difference. Practically, this means CPU performance is on par with those chips, so any FPS differences in Archeage come down to the GPU.

Q: Can this setup handle 4K at all?

A: Yes, but only at Low or Medium settings. At 3840x2160 Low, the average FPS is 60.4, and at Medium it is 58. High drops to 39.3, and Ultra is unplayable at 25.2. If you must play at 4K, stick to Low or Medium for a playable frame rate.

How This Combo Ranks

The combo rank of 839 out of 1727 tested combos places this Ryzen 5 3600 + RX 6750 XT pairing in the 48th percentile of all configurations tested in Archeage. That is a middling result, not terrible but far from elite. The CPU itself sits at the 76th percentile vs all CPUs, and the GPU at the 79th percentile vs all GPUs, so both components are above-average individually. Yet the measured FPS at 4K Ultra (25.2) and even 1440p Ultra (43.2) shows that Archeage’s heavy settings can overwhelm this pairing. The rank reflects that many other combos—likely with newer CPUs or higher-end GPUs—do better at those demanding presets. However, at 1080p, this combo’s performance (159.4 FPS at Low, 99.5 at High) is strong enough to rank comfortably in the upper half for that resolution class. The data indicates that the combo’s overall rank is dragged down by its 4K results, not its 1080p or 1440p performance.

GPU Role

The Radeon RX 6750 XT is built on the RDNA 2.0 architecture with the Navi 22 chip, using a 7 nm process. It has 2560 shading units, 160 TMUs, and 64 ROPs, with a base clock of 2150 MHz and a boost clock of 2600 MHz. The memory configuration is 12 GB of GDDR6 on a 192-bit bus, delivering 432.0 GB/s of bandwidth. These specs translate to a PassMark G3D score of 20700 and a percentile rank of 79 vs all GPUs. In Archeage, the GPU’s role becomes evident when comparing settings at the same resolution. At 1080p, moving from Low (159.4 FPS) to Medium (143.8 FPS) is a modest 10% drop, but High (99.5 FPS) is a 31% drop from Low, and Ultra (68 FPS) is a 57% drop. This pattern repeats at 1440p and 4K, with Ultra being disproportionately punishing. The GPU’s 12 GB VRAM is not the issue—even at 4K Ultra, the FPS collapse is more likely due to the FP32 performance of 13.31 TFLOPS and the texture rate of 416.0 GTexel/s being insufficient for the game’s highest shader and texture loads. The data shows that the GPU is the primary limiter at Ultra settings across all resolutions, while at Low and Medium, it has headroom to spare.

Measured FPS Breakdown

At 1920x1080, the combo delivers a wide range of performance: Low settings average 159.4 FPS, Medium 143.8 FPS, High 99.5 FPS, and Ultra 68 FPS. These numbers indicate that 1080p is fully playable at any preset, with Ultra still above 60 FPS. Moving to 2560x1440, the averages are 110.5 FPS at Low, 99 FPS at Medium, 66.1 FPS at High, and 43.2 FPS at Ultra. The 1440p results show that High is the highest playable setting for a 60 FPS target, while Ultra falls below that threshold. At 3840x2160, the numbers drop sharply: Low averages 60.4 FPS, Medium 58 FPS, High 39.3 FPS, and Ultra 25.2 FPS. The 4K data reveals that only Low and Medium are viable for smooth gameplay, and even then, Medium barely clears 58 FPS. The pattern across all resolutions is consistent: Low and Medium settings see relatively small FPS drops as resolution increases, while High and Ultra see exponential declines. For example, 1080p High (99.5 FPS) to 1440p High (66.1 FPS) is a 34% drop, but 1440p High to 4K High (39.3 FPS) is another 41% drop. This suggests the GPU’s compute and memory bandwidth are exhausted at higher resolutions with demanding settings.

Resolution Scaling

The FPS scaling from 1080p to 4K tells a clear story about which component is the bottleneck. At Low settings, 1080p (159.4 FPS) to 1440p (110.5 FPS) is a 31% drop, and 1440p to 4K (60.4 FPS) is a 45% drop. That total 62% reduction from 1080p to 4K at Low is typical of GPU-bound scaling, as the CPU is less stressed at lower graphical loads. At Medium settings, the drop is similar: 1080p (143.8 FPS) to 1440p (99 FPS) is 31%, and 1440p to 4K (58 FPS) is 41%, totaling 60% from 1080p to 4K. However, at High settings, the scaling steepens: 1080p (99.5 FPS) to 1440p (66.1 FPS) is 34%, but 1440p to 4K (39.3 FPS) is 41%, which is a 60% total drop. Ultra settings show the worst scaling: 1080p (68 FPS) to 1440p (43.2 FPS) is 36%, and 1440p to 4K (25.2 FPS) is 42%, a 63% total reduction. The fact that the percentage drops are similar across settings, but the absolute FPS values are much lower at High and Ultra, indicates that the GPU is the limiting component at all resolutions. If the CPU were the bottleneck, we would see a larger FPS gap between 1080p and 1440p at Low settings, but the 31% drop at Low is not dramatically different from the 36% drop at Ultra. This points to the RX 6750 XT being the primary constraint, especially as resolution increases.

CPU Role

The Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, manufactured on a 7 nm process. It has a base clock of 3.60 GHz and a boost clock of 4.20 GHz, with 32 MB of shared L3 cache. Its benchmark scores include a Cinebench R23 multicore score of 15045 and a single-core score of 2124, placing it at the 76th percentile vs all CPUs. In Archeage, the CPU’s role is most visible at 1080p Low settings, where the FPS reaches 159.4—a number that suggests the CPU can push frames high when the GPU is not heavily loaded. However, the fact that 1080p Ultra (68 FPS) is less than half of 1080p Low (159.4 FPS) indicates that the GPU, not the CPU, is dictating performance at higher settings. The CPU’s 12 threads are sufficient for an MMORPG like Archeage, which is not known for extreme multi-threaded scaling. The PassMark multithread score of 17700 and the 3DMark max threads score of 4603 support this, showing solid but not exceptional parallel performance. Compared to its nearest rivals, the Intel Core i5-11400 (avg score 18150, delta -0.1%) and the AMD Ryzen 5 7535HS (18101, delta 0.2%), the Ryzen 5 3600 is effectively tied in raw compute. This means that any FPS differences in Archeage between this combo and one with those CPUs would come from the GPU or memory configuration, not the processor. The data shows that the CPU is not a weak link in this pairing; rather, it provides enough headroom for the RX 6750 XT to operate at its full potential, especially at 1080p and 1440p. At 4K, the CPU is largely irrelevant, as the GPU is clearly the limiting factor, with all settings showing sub-60 FPS except Low (60.4 FPS).