Allods Online
This combination delivers exceptional performance with an average of 145 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 46 | 73 | 116 | 149 |
| 1440p QHD | 88 | 140 | 179 | 196 |
| 1080p Full HD | 140 | 175 | 209 | 228 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Allods Online with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 4080, In-Depth Analysis
Allods Online, a 2010 MMORPG, is far from the most demanding title in the benchmark database, but the combination of the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4080 produces a very wide range of performance depending on how you configure it. The data shows that this pairing is capable of delivering everything from playable 4K experiences to extremely high refresh rates at 1080p, but the scaling between settings and resolutions is uneven, revealing a title where the CPU’s single-threaded strength and the GPU’s raw throughput interact in unusual ways. This analysis breaks down the measured frame rates to help you decide where to set your expectations and your graphics options.
Resolution Scaling
The measured FPS data for Allods Online shows that resolution scaling is heavily dependent on the preset chosen, but the overall trend is clear: this combo is strong enough to push past 60 FPS at 4K in most settings, while becoming a high-refresh-rate monster at lower resolutions. At 1080p with Low settings, the average FPS is 228, which is an exceptional result. Moving to 1440p Low drops that to 196 FPS, a decrease of about 14%. At 4K Low, the average is 149 FPS, which is a 24% drop from 1440p and a 35% drop from 1080p. This scaling from Low settings shows that even at the lowest graphical load, the GPU is still not entirely saturated, as the frame rates remain well above what a typical 144Hz monitor can display, even at 4K.
The scaling pattern changes significantly when you move to High settings. At 1080p High, the average is 175 FPS. At 1440p High, it falls to 140 FPS, a 20% reduction. The most dramatic drop occurs when moving from 1440p to 4K High, where the average FPS plummets to 73, a 48% reduction. This steep decline indicates that at 4K High, the RTX 4080’s rendering load becomes the primary bottleneck, and the frame rate is much more sensitive to pixel count. The gap between 1080p and 1440p High is modest, but the 4K step is significant.
Ultra settings provide the most telling insight into the performance ceiling. At 1080p Ultra, the average FPS is 140. At 1440p Ultra, it drops to 88 FPS, a 37% decrease. However, the jump to 4K Ultra results in an average of just 46 FPS, a 48% reduction from 1440p and a 67% reduction from 1080p. This is the only configuration in the data where the combo drops below the 60 FPS threshold, highlighting that 4K Ultra is a step too far for a smooth experience. The pattern suggests that while the CPU is capable of feeding the GPU at lower resolutions, the game’s engine becomes increasingly GPU-bound as resolution scales up, particularly with the heavier High and Ultra presets.
The data indicates that the limiting component shifts with resolution. At 1080p, the CPU’s single-thread performance is likely the limiting factor, as seen in the relatively small FPS differences between Low (228 FPS) and High (175 FPS). At 4K, the GPU becomes the clear bottleneck, as evidenced by the massive FPS drops when increasing the preset from Low (149 FPS) to High (73 FPS) or Ultra (46 FPS). This is a classic sign of a game that is not well-optimized for modern hardware at high resolutions, where the GPU’s workload expands faster than the CPU can prepare frames.
Settings Recommendations
Given the measured data, the optimal settings for this combo depend entirely on your target resolution and refresh rate. For 1080p gaming, the data shows that even Ultra settings provide an average of 140 FPS, which is excellent for high-refresh-rate monitors. The Medium preset offers 209 FPS, and High offers 175 FPS. There is no need to drop below High for a competitive advantage; the difference between High and Ultra is a 35 FPS drop (from 175 to 140), but both are perfectly playable. If you have a 240Hz monitor, the Low setting at 228 FPS is the only one that can fully saturate it, but the visual hit is likely not worth the 53 FPS gain over Medium.
At 1440p, the recommendation is more nuanced. The High preset delivers 140 FPS, which is superb for most high-refresh-rate monitors. The Medium preset is even better, with 179 FPS, and the minimum FPS of 152 ensures that there are no noticeable stutters. Ultra drops to 88 FPS, which is still playable but represents a significant 52 FPS loss from High. For a smooth experience, Medium is the sweet spot, offering the best balance of frame rate and visual fidelity, with a minimum FPS of 152 that is well above the refresh rate of most 1440p panels.
4K is where you need to make the most compromises. The Ultra preset is not viable, with an average of 46 FPS that would feel laggy. The High preset is the minimum recommendation, with an average of 73 FPS, which is playable but not ideal for fast-paced action. The Medium preset at 116 FPS is the clear winner here, providing a smooth experience with a minimum FPS of 99. The Low preset at 149 FPS is also an option if you prefer maximum frame rates, but the visual quality of Low is likely too poor to justify the 33 FPS gain over Medium. The data strongly suggests that 4K Medium is the best experience for this resolution, offering a 43 FPS improvement over High while still maintaining a high level of visual quality.
The minimum FPS figures provide additional guidance. For 1080p Medium, the minimum is 178 FPS; for 1440p Medium, it is 152 FPS; and for 4K Medium, it is 99 FPS. These minimums are all within a comfortable range for their respective resolutions, indicating that the combo maintains stable frame pacing in the Medium preset. In contrast, the High and Ultra presets lack reported minimum FPS values, suggesting that frame times may be less consistent, which is another reason to favor the Medium preset for a smoother experience across all resolutions.
How This Combo Ranks
In the global database of tested hardware combinations for Allods Online, this specific pairing of the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4080 holds a combo rank of 609 out of 3670 tested combos. This places it in the top 16.6% of all configurations tested in this game, which is a strong showing. The percentileVsAllGpus for the RTX 4080 is 86, and the percentileVsAllCpus for the Ryzen 7 5700 is 78, which indicates that both components are individually high-performing, but the combo rank shows that they are not necessarily the absolute best pairing for this specific title.
The rank of 609 suggests that while this combo is powerful, there are 608 other combinations that produce higher average FPS in Allods Online. This is likely due to the game’s age and its reliance on single-threaded CPU performance, where newer or higher-clocked CPUs might yield better results. The data shows that the combo is not bottlenecked by the GPU in most scenarios, as the RTX 4080 is capable of producing over 200 FPS at 1080p Low. The limiting factor is more likely the CPU’s single-core speed, which, while good, is not top-tier for this game’s engine.
The combo’s rank is respectable but not exceptional, which is a practical consideration for a builder. It means that you are getting a very capable system, but if your primary goal is to maximize FPS in Allods Online specifically, there are other configurations that might offer better performance. However, for a game that is over a decade old, the fact that this combo can push 4K Medium at 116 FPS and 1080p Ultra at 140 FPS confirms its overall strength. The rank is a useful reference point, but the measured FPS data is more actionable for making settings decisions.
FAQ
Q: Can this combo run Allods Online at 4K with high settings?
A: Yes, but with a caveat. The measured average FPS at 4K High is 73, which is playable. However, the 4K Ultra preset drops to 46 FPS, which is not smooth. For a better 4K experience, the Medium preset at 116 FPS is recommended.
Q: What is the best resolution and settings for a 144Hz monitor?
A: At 1440p, the Medium preset delivers 179 FPS with a minimum of 152 FPS, making it ideal for a 144Hz monitor. At 1080p, you can use the High preset at 175 FPS, or even Ultra at 140 FPS, both of which are above the 144Hz threshold.
Q: Is the RTX 4080 overkill for this game?
A: The GPU is not overkill at 4K, where it is the limiting component. At 1080p, the CPU is the bottleneck, as the GPU can produce 228 FPS on Low. The RTX 4080’s performance is best utilized at higher resolutions where its raw power is needed.
Q: How does the CPU affect performance in this game?
A: The Ryzen 7 5700 has 8 cores and 16 threads, and the data suggests that the game is sensitive to single-thread performance. The 3.70 GHz base and 4.60 GHz boost clocks are likely the reason why the combo can maintain high FPS at 1080p, where the CPU is the primary limiting factor.
Q: What is the minimum FPS I can expect at 1440p Medium?
A: The measured minimum FPS at 1440p Medium is 152. This is a strong result, indicating minimal frame drops and a smooth experience, as it remains well above the 144Hz refresh rate target.
Q: Should I play on Low settings to get the highest FPS?
A: Only if you have a 240Hz monitor and are playing at 1080p, where Low settings produce 228 FPS. At 1440p, Low gives 196 FPS, and at 4K, it gives 149 FPS. For most users, the Medium preset offers a much better visual experience with only a moderate FPS loss.
GPU Role
The NVIDIA GeForce RTX 4080 is a high-end GPU with 16 GB of GDDR6X memory on a 256-bit bus, providing 716.8 GB/s of memory bandwidth. Its base clock is 2205 MHz, with a boost clock of 2505 MHz. In Allods Online, the GPU’s role is primarily defined by resolution and settings. At 1080p, the GPU is not the limiting factor; the data shows that the CPU holds it back, as FPS scales more with settings than with resolution. For example, at 1080p Low the FPS is 228, and at 4K Low it is 149, which is a smaller drop than what you see with High settings.
The GPU’s memory capacity of 16 GB is more than sufficient for this game, which was released in 2010. The data does not show any indication of memory bottlenecks, even at 4K Ultra, where the average FPS is 46. This low FPS is more likely due to the GPU’s compute load rather than memory bandwidth, as the game’s textures are likely not using the full 16 GB capacity. The 716.8 GB/s bandwidth is also ample for the game’s requirements, as the FPS drops at 4K are consistent with a shader-bound scenario, not a memory-bound one.
The RTX 4080’s performance percentile of 86 indicates it is a top-tier card, and the benchmark results reflect this. The passmark G3D score of 34457 is a strong indicator of its directX 11 performance, which is the API that Allods Online likely uses. However, the game’s age means that the GPU’s newer features, such as ray tracing and DLSS, are not relevant. The data shows that the GPU’s raw rasterization power is what matters, and it is more than adequate for this title, allowing for high frame rates at 1080p and 1440p, and playable frame rates at 4K with the right settings.
CPU Role
The AMD Ryzen 7 5700 is an 8-core, 16-thread processor from the 5000 series, based on the Zen 3 architecture. It has a base clock of 3.70 GHz and a boost clock of 4.60 GHz. In Allods Online, the CPU’s role is critical, as the game’s engine appears to be heavily reliant on single-thread performance. The benchmark data supports this: at 1080p, the difference between Low (228 FPS) and High (175 FPS) is 53 FPS, but the difference between High and Ultra (140 FPS) is 35 FPS. This indicates that the CPU is the primary bottleneck at lower resolutions, as the GPU has enough headroom to render frames faster than the CPU can issue draw calls.
The CPU’s single-thread score of 901 in 3dmark and 2916 in Cinebench R23 is what allows it to push high frame rates at 1080p. The boost clock of 4.60 GHz is likely the key factor in this performance. The 16 MB of L3 cache is also beneficial for a game like this, which may have large chunks of data that need to be accessed quickly. However, the CPU’s performance is not exceptional, as shown by its percentile of 78, meaning it is better than 78% of all CPUs, but not the best.
The CPU’s multi-threaded performance is less relevant for this game. The 8 cores and 16 threads are more than enough for an MMORPG, which typically does not scale well with many cores. The data shows that the FPS is not limited by the number of cores, but by the speed of a single core. This is why the combo rank is 609 out of 3670, as CPUs with higher single-thread clocks, like some Intel offerings, might perform better in this specific title. The Ryzen 7 5700’s strength is its balance of power and efficiency, but in Allods Online, it is the single-thread speed that dictates the upper limits of performance at lower resolutions.
Hardware Specifications
AMD Ryzen 7 5700
NVIDIA GeForce RTX 4080
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce RTX 4080 in Allods Online
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 149.0 |
| 3840x2160 | Medium | 116.0 |
| 3840x2160 | High | 73.0 |
| 3840x2160 | Ultra | 46.0 |
| 2560x1440 | Low | 196.0 |
| 2560x1440 | Medium | 179.0 |
| 2560x1440 | High | 140.0 |
| 2560x1440 | Ultra | 88.0 |
| 1920x1080 | Low | 228.0 |
| 1920x1080 | Medium | 209.0 |
| 1920x1080 | High | 175.0 |
| 1920x1080 | Ultra | 140.0 |
Allods Online with Ryzen 7 5700 + Other GPUs
See how Allods Online performs with the same CPU but different graphics cards.
Allods Online with RTX 4080 + Other CPUs
See how Allods Online performs with the same GPU but different processors.
Other Games with Ryzen 7 5700 + RTX 4080
Explore FPS benchmarks for other games using this same hardware combination.