Instant compatibility check with FPS benchmarks and optimization tips
Thief
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 85 | 85 | 112 | 150 |
| 1440p QHD | 138 | 151 | 173 | 195 |
| 1080p Full HD | 180 | 181 | 198 | 217 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Thief on Your System
The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 5090 is an exceptionally high-performing combination for Thief, placing 57th out of 3,720 tested combos. This hardware does not merely run the game; it dominates it, delivering well above the 60 FPS playable threshold at every resolution and preset tested. The data indicates a system where the GPU is the primary scaling factor, with the CPU providing ample headroom even at lower resolutions.
How This Combo Ranks
The combination of the Intel Core i7-14700KF and NVIDIA GeForce RTX 5090 achieves a combo rank of 57 out of 3,720 tested combinations in Thief. This places it within the top 1.5% of all tested systems, a position that reflects the elite-tier nature of both components. The CPU itself sits at the 94th percentile among all CPUs, and the GPU at the 92nd percentile among all GPUs, so this ranking is a logical consequence of pairing two top-tier parts.
This rank is not merely a function of raw component power but also of their synergy. The data shows that the weakest performance recorded across all tested settings and resolutions is 84.7 FPS, which is significantly above the 60 FPS playable threshold. In practical terms, this means that no matter how demanding the in-game settings are, this combo will never drop below a smooth, playable frame rate. The benchmark results indicate a system with near-zero risk of a poor experience, making it a top-tier choice for any user prioritizing maximum performance in this title.
CPU and GPU Roles
The benchmark data reveals a clear division of labor between the CPU and GPU in Thief, with the GPU acting as the primary performance driver. This is most evident when observing the scaling of frame rates across different resolutions at the same settings. At "Low" settings, the average FPS increases from 150.3 at 3840x2160 to 194.6 at 2560x1440 and finally to 217.4 at 1920x1080. This substantial jump indicates that the GPU is the bottleneck at higher resolutions; as the pixel count drops, the GPU has more headroom, and the frame rate rises significantly.
The CPU's role becomes more apparent at the lowest resolution. The difference between 2560x1440 and 1920x1080 at "Low" settings is only 22.8 FPS (194.6 to 217.4), whereas the jump from 3840x2160 to 2560x1440 is 44.3 FPS (150.3 to 194.6). This compression in scaling suggests that at 1920x1080, the Intel Core i7-14700KF is beginning to assert itself more as a limiting factor, though still delivering a massive 217.4 FPS. The CPU's Cinebench R23 multi-core score of 44,167 and PassMark single-thread score of 4,480 show it is a formidable processor, but the data confirms that Thief leans heavily on the graphics card. Even at 1920x1080, the GPU still has enough performance to push frame rates far beyond the refresh rate of most monitors, meaning the CPU is never a practical constraint for achieving a smooth experience.
Similar Performance Alternatives
Based on the nearest rival data, several other components would deliver nearly identical performance in this system. For the CPU, the AMD Ryzen 7 9700F is an exceptionally close match, with an average benchmark score of 69,996 versus the Intel Core i7-14700KF's 70,163, a negligible delta of 0.2%. The AMD Ryzen 9 7940HX is also within a hair's breadth, scoring 69,875 (0.4% delta), and the AMD Ryzen 9 7950X is similarly close at 69,515 (0.9% delta). On the other end, the Intel Core Ultra 7 265K is a slightly faster alternative, scoring 70,879, which is 1% higher. Any of these CPUs would produce near-identical frame rates in Thief, meaning the choice between them would be based on other factors like platform features, not gaming performance.
On the GPU side, the NVIDIA GeForce RTX 5090's closest rivals are a mix of professional and mobile parts. The NVIDIA Tesla P100 PCIe 16 GB is the nearest match, with an average score of 79,605 versus the RTX 5090's 79,842, a delta of 0.3%. The NVIDIA Tesla P100 PCIe 12 GB follows at 79,396 (0.6% delta), and the AMD Radeon RX 6850M XT is 1.1% behind at 78,940. The AMD Radeon Pro Vega 64X is 1.4% ahead at 80,959. In the context of Thief, these alternatives would produce very similar FPS numbers, suggesting that the game's rendering workload does not uniquely favor the RTX 5090's specific feature set.
FAQ
*Q: Is the Intel Core i7-14700KF + NVIDIA GeForce RTX 5090 combo overkill for Thief?*
A: The benchmark data strongly suggests yes. The lowest average FPS recorded across all resolutions and settings is 84.7 FPS, which is 24.7 FPS above the playable threshold. Even at 4K with "Ultra" settings, the system is not being pushed to its limit.
Q: What is the best settings preset for 4K gaming?
A: The "Ultra" preset is fully playable at 3840x2160, achieving an average FPS of 84.7. This is above the 60 FPS threshold, making it the most demanding preset that still provides a smooth experience at this resolution.
Q: How much performance is lost when moving from 1920x1080 to 3840x2160 at "Ultra" settings?
A: The average frame rate drops from 180.2 FPS at 1920x1080 to 84.7 FPS at 3840x2160, a difference of 95.5 FPS. This represents a 53% reduction in frame rate, highlighting the significant load increase that 4K rendering places on the GPU.
Q: Is the CPU or GPU the limiting factor at 1920x1080?
A: The data shows that at 1920x1080 with "Low" settings, the system reaches 217.4 FPS. The scaling from 2560x1440 to 1920x1080 is smaller than from 4K to 1440p, indicating the CPU begins to have a larger influence, but it is still not a bottleneck for achieving high frame rates.
Q: Are there any settings presets that are not playable?
A: No. The verdict data lists all four tested presets ("Low", "Medium", "High", "Ultra") as playable at all three resolutions (1920x1080, 2560x1440, 3840x2160). Every single combination tested maintains an average FPS above 60.
Q: How does the RTX 5090 compare to its nearest rival in terms of benchmark score?
A: The NVIDIA GeForce RTX 5090's average benchmark score is 79,842. Its closest rival, the NVIDIA Tesla P100 PCIe 16 GB, scores 79,605, which is 0.3% lower. This indicates nearly identical compute performance in synthetic benchmarks.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of performance across all resolution and settings combinations. The system consistently delivers high frame rates, with the lowest average being 84.7 FPS at 3840x2160 with "Ultra" settings and the highest being 217.4 FPS at 1920x1080 with "Low" settings.
At 3840x2160, the average frame rates are as follows: "Low" settings produce 150.3 FPS, "Medium" settings produce 112.3 FPS, "High" settings produce 85.3 FPS, and "Ultra" settings produce 84.7 FPS. The difference between "High" and "Ultra" is minimal (0.6 FPS), suggesting that the "Ultra" preset offers little visual benefit for the slight performance cost at this resolution.
Moving to 2560x1440, the performance improves significantly. "Low" settings yield 194.6 FPS, "Medium" settings yield 172.5 FPS, "High" settings yield 150.6 FPS, and "Ultra" settings yield 138.4 FPS. The jump from 4K to 1440p is substantial, with "Ultra" settings seeing a 53.7 FPS improvement.
At 1920x1080, the system reaches its peak performance. "Low" settings produce 217.4 FPS, "Medium" settings produce 198.3 FPS, "High" settings produce 180.9 FPS, and "Ultra" settings produce 180.2 FPS. Notably, the difference between "High" and "Ultra" at this resolution is only 0.7 FPS, indicating that these two presets are effectively identical in performance. The data shows no min or max FPS values, only averages, so the frame time consistency cannot be assessed from this data.
Best Settings per Resolution
The data clearly indicates that the most demanding preset, "Ultra," is playable at every resolution. The decision of which settings to use is therefore one of preference, not of achieving playable frame rates.
At 3840x2160, the "Ultra" preset is the best choice, achieving an average FPS of 84.7. While this is above the 60 FPS threshold, it is the lowest performance point of the entire test matrix. Users prioritizing maximum visual fidelity can select "Ultra" with confidence. The "High" preset is nearly identical in performance at 85.3 FPS, so either offers a similar experience.
At 2560x1440, the "Ultra" preset is again the best option, delivering a robust 138.4 FPS. This provides a significant margin above the playable threshold, ensuring excellent smoothness. The performance is so high that users could even consider this resolution and preset a sweet spot for high-refresh-rate monitors.
At 1920x1080, the "Ultra" preset delivers an outstanding 180.2 FPS. This is far beyond the 60 FPS threshold and is suitable for the fastest high-refresh-rate displays. The performance difference between "High" and "Ultra" is negligible, so selecting "Ultra" is the obvious choice for the best possible visuals without any meaningful performance penalty.