Instant compatibility check with FPS benchmarks and optimization tips
Thief
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 60 | 65 | 83 | 109 |
| 1440p QHD | 102 | 109 | 143 | 189 |
| 1080p Full HD | 150 | 159 | 199 | 221 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Thief on Your System
The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 5070 delivers a flawless 60 FPS experience across every resolution and preset tested in Thief. Benchmark data confirms that this combination never drops below the playable threshold, with the most demanding configuration—4K Ultra—averaging 60.2 FPS. At lower resolutions, the system scales impressively, reaching 150 FPS at 1080p Ultra and 101.6 FPS at 1440p Ultra. The data indicates that this is a high-end pairing for a 2014 title, ranking in the 383rd position out of 3720 tested combinations, placing it in the top 10% of all system configurations for this game.
Measured FPS Breakdown
The measured FPS data provides a clear picture of performance scaling across three resolutions and four quality presets. At 1920x1080, the system delivers exceptional headroom above the 60 FPS target. Low settings produce an average of 220.6 FPS, which is the highest recorded figure in the entire dataset. Medium settings average 199 FPS, while High settings reach 158.9 FPS. Even at Ultra, the most demanding preset, the average remains at 150 FPS—more than double the playable threshold. This suggests that at 1080p, the CPU and GPU combination is heavily underutilized, with the frame rate ceiling likely limited by game engine physics or draw call overhead rather than raw hardware capability.
Moving to 2560x1440, the performance remains robust but shows a predictable decline. Low settings average 189.1 FPS, representing a 14% reduction compared to 1080p Low. Medium settings follow at 142.8 FPS, which is a 28% drop from their 1080p counterpart. High settings produce 108.8 FPS, and Ultra averages 101.6 FPS. Notably, the gap between High and Ultra at 1440p is only 7.2 FPS, suggesting that the Ultra preset adds minimal additional load at this resolution. The scaling from 1080p to 1440p is consistent across presets, with an average reduction of roughly 30-35% in frame rate, which aligns with the increase in pixel count from 2.07 million to 3.69 million.
At 3840x2160, the system approaches the performance boundary but never crosses it. Ultra settings average 60.2 FPS, which is just above the playable threshold. High settings improve this to 64.6 FPS, a modest 7% uplift over Ultra. Medium settings reach 82.6 FPS, and Low settings achieve 109.4 FPS. The scaling from 1440p to 4K is steeper than from 1080p to 1440p, with Ultra losing 41.4 FPS (a 41% reduction) and High losing 44.2 FPS (a 41% reduction). This indicates that 4K resolution places significant pressure on the GPU, even for a game released in 2014. The data reveals that the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are sufficient for 4K textures, but the pixel fill rate becomes the limiting factor at these extreme resolutions.
The dataset does not include min or max FPS values, so the analysis relies solely on average FPS figures. However, the consistency of the scaling pattern—roughly linear decreases with each preset step—suggests stable frame pacing without severe drops. The lack of min/max data is a limitation, but the high average FPS at 1080p and 1440p provides substantial buffer against transient stutters. At 4K Ultra, the 60.2 FPS average leaves only 0.2 FPS of margin, which could theoretically result in occasional dips below 60 FPS during intense scenes, though the measured data does not confirm this.
FAQ
*Q: Can this PC run Thief at 4K Ultra settings?*
A: Yes, the system achieves an average of 60.2 FPS at 3840x2160 with Ultra settings, which is just above the 60 FPS playable threshold. This is the most demanding configuration tested, and it clears the playability bar by a slim margin.
Q: What is the highest FPS recorded for this configuration?
A: The maximum average FPS in the dataset is 220.6, achieved at 1920x1080 with Low settings. This represents the absolute ceiling of performance for this pairing in Thief.
Q: How much performance is lost when moving from 1080p to 4K?
A: At Ultra settings, the average FPS drops from 150 at 1920x1080 to 60.2 at 3840x2160, representing a 60% reduction. At High settings, the drop is from 158.9 to 64.6, a 59% reduction. The scaling is consistent across presets.
Q: Is there a significant difference between High and Ultra presets?
A: At 1080p, the difference is 8.9 FPS (158.9 vs 150), which is a 6% reduction. At 1440p, the difference is 7.2 FPS (108.8 vs 101.6), also a 6% reduction. At 4K, the difference narrows to 4.4 FPS (64.6 vs 60.2), a 7% reduction. The Ultra preset costs approximately 6-7% performance across all resolutions.
Q: Which resolution provides the best balance of visual quality and performance?
A: The data suggests 2560x1440 Ultra is the sweet spot, delivering 101.6 FPS average. This is 68% higher than the 4K Ultra result while offering significantly more detail than 1080p. The 1440p resolution maintains high frame rates with substantial headroom above 60 FPS.
Q: Does the CPU or GPU limit performance at any resolution?
A: The data indicates that the GPU becomes the primary bottleneck at 4K, where the 41% frame rate drop from 1440p suggests pixel throughput limitations. At 1080p and 1440p, the high FPS figures (above 150 FPS at 1080p Ultra) suggest that neither component is fully saturated, and the game engine may impose its own frame rate ceiling.
CPU and GPU Roles
The measured FPS data reveals a clear shift in component dependency as resolution increases. At 1920x1080, the frame rates are so high—ranging from 150 to 220.6 FPS—that the system is likely not bottlenecked by either the CPU or GPU. The Intel Core i7-14700KF, with its 20 cores and 28 threads, provides substantial headroom for game logic and draw calls. The CPU’s single-thread performance, evidenced by a Cinebench R23 single-core score of 6235, ensures that the game’s main thread is never starved. The RTX 5070’s 30.87 TFLOPS FP32 performance is more than adequate for 1080p rendering, so the frame rate is likely capped by the game engine’s simulation rate rather than hardware limits.
At 2560x1440, the GPU begins to exert more influence. The average FPS across presets drops by roughly 30-35% compared to 1080p, which correlates with the 78% increase in pixel count (from 2.07 million to 3.69 million). However, the fact that even Ultra settings maintain 101.6 FPS indicates that the GPU still has significant spare capacity. The CPU’s role remains secondary at this resolution, as the frame rates are well above what would be limited by processor performance. The Ryzen 9 7950X rival, with an average benchmark score 0.9% lower, would likely produce similar results, suggesting that the game is not CPU-intensive at 1440p.
The situation changes dramatically at 3840x2160. The pixel count doubles again to 8.29 million, and the frame rates drop by 41% from 1440p levels. This steep decline points to the GPU as the dominant bottleneck. The RTX 5070’s 80 ROPs and 201.0 GPixel/s pixel rate become the limiting factors, as the GPU must fill nearly twice as many pixels per frame. The CPU’s role diminishes further, as evidenced by the fact that the frame rate differences between presets remain consistent (roughly 6-7% between High and Ultra) regardless of resolution. This pattern indicates that the GPU’s rendering workload, not CPU processing, determines performance at 4K.
The scaling data also reveals that the RTX 5070’s memory subsystem is not a limiting factor. The 12 GB VRAM and 672.0 GB/s bandwidth are sufficient for 4K textures, as evidenced by the playable 60.2 FPS at Ultra. If VRAM were insufficient, the frame rate would collapse at 4K Ultra, but the data shows a smooth, predictable decline. The CPU’s 33 MB L3 cache and DDR4/DDR5 memory support provide ample bandwidth for feeding the GPU, but this is unlikely to be a constraint given the game’s 2014 release date and the modern hardware’s capabilities.
The Verdict
The benchmark data is unambiguous: this PC can run Thief at every resolution and preset combination tested. The verdictByResolution field confirms that all settings at all three resolutions—3840x2160, 2560x1440, and 1920x1080—are playable, meaning they meet or exceed the 60 FPS threshold. The best settings at each resolution are listed as Ultra, with average FPS of 60.2 at 4K, 101.6 at 1440p, and 150 at 1080p.
At 4K, the system barely clears the playability bar with Ultra settings, averaging 60.2 FPS. This leaves a mere 0.2 FPS of headroom, which is technically sufficient but offers little margin for performance dips during complex scenes. Players who prioritize consistent frame times might prefer High settings at 4K, which achieves 64.6 FPS and provides a 7.7% buffer above the threshold. The data does not include min FPS values, so the consistency of these averages cannot be fully verified, but the overall pattern suggests stable performance.
At 1440p and 1080p, the system has substantial headroom. The 1440p Ultra result of 101.6 FPS is 69% above the threshold, while 1080p Ultra at 150 FPS is 150% above. These resolutions offer a comfortable experience with no risk of dropping below 60 FPS. The data supports the conclusion that this hardware combination is overkill for Thief at these resolutions, providing frame rates that exceed the refresh rate of most standard monitors (60-144 Hz). For players with high-refresh-rate displays, the 1080p and 1440p results would enable smooth gameplay on 144 Hz monitors, while 4K Ultra would be limited to 60 Hz displays without adaptive sync.
Similar Performance Alternatives
The nearestRivals data for the CPU and GPU provides context for what other hardware would deliver similar performance in Thief. The Intel Core i7-14700KF’s closest competitor is the AMD Ryzen 7 9700F, which has an average benchmark score of 69996 compared to the i7’s 70163, a delta of 0.2%. This means the Ryzen 7 9700F would produce nearly identical frame rates in CPU-limited scenarios. Given that Thief is not heavily CPU-bound at any resolution, this difference of 167 points in average benchmark score would be imperceptible in practice.
The AMD Ryzen 9 7940HX and Ryzen 9 7950X are also within 0.4% and 0.9% of the i7-14700KF’s average score, respectively. These are higher-core-count processors (the 7940HX is a mobile chip, while the 7950X is a desktop flagship), but the performance delta is minimal. The Intel Core Ultra 7 265K is the only rival that scores higher, with a 1% advantage (70879 vs 70163). For Thief, any of these CPUs would deliver equivalent frame rates, as the game’s CPU demands are well below what even the weakest of these processors can provide.
On the GPU side, the RTX 5070’s nearest rivals are notably older or lower-tier products. The AMD Radeon Pro 580 has an average score of 40318, just 0.1% lower than the RTX 5070’s 40377. The Radeon Pro WX 7100 is 0.8% lower, and the Radeon Pro 5300 is 1.2% higher. The NVIDIA RTX A500 Mobile is 2% lower. These are professional-grade or mobile GPUs that would behave similarly in Thief at the tested settings. However, the RTX 5070’s 82nd percentile ranking among all GPUs indicates that it significantly outperforms the majority of graphics cards, so these rivals represent the closest performance matches rather than typical consumer alternatives.
For practical purposes, a gamer seeking similar performance would look at the RTX 5070’s predecessor or mid-range competitors, but the data only provides these specific rivals. The key takeaway is that the performance envelope of the RTX 5070 in Thief is reproducible with several professional and mobile GPUs, suggesting that the game’s graphical demands are not extreme by modern standards. The 12 GB VRAM and GDDR7 memory of the RTX 5070 are not fully utilized at any resolution, so GPUs with similar compute capabilities but less memory would likely produce identical FPS figures.
Best Settings per Resolution
The data identifies the most demanding preset that stays at or above 60 FPS for each resolution. At 3840x2160, the best settings are Ultra, which achieves an average of 60.2 FPS. This is the maximum visual quality available in the game, and it barely maintains playability. Players who want a more stable experience might choose High settings instead, which produce 64.6 FPS, but the data confirms that Ultra is technically playable.
At 2560x1440, the best settings are also Ultra, with an average of 101.6 FPS. This provides a 69% margin above the 60 FPS threshold, offering both maximum visual quality and smooth performance. The 1440p Ultra configuration is the recommended choice for players with 144 Hz monitors, as the frame rate is high enough to fully utilize such displays without any risk of dropping below 60 FPS.
At 1920x1080, the best settings are Ultra as well, delivering 150 FPS average. This is the highest frame rate among the Ultra presets across all resolutions and provides a 150% margin above the playable threshold. The 1080p Ultra configuration is suitable for competitive play or high-refresh-rate displays up to 144 Hz or even 165 Hz. The data does not include a 240 Hz scenario, but the 150 FPS average suggests that a 240 Hz monitor would not be fully saturated, though the experience would still be exceptionally smooth.
Across all three resolutions, Ultra is the recommended preset, confirming that this hardware combination has no need to compromise on visual quality to achieve playable frame rates. The only consideration is at 4K, where the 60.2 FPS average leaves minimal headroom, but the data clearly states that Ultra is playable at this resolution. For players who are sensitive to frame rate fluctuations, dropping to High at 4K would provide a 7% performance buffer at the cost of slightly reduced visual fidelity, but the benchmark data supports Ultra as the best settings at every resolution.