Instant compatibility check with FPS benchmarks and optimization tips
Thief
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 44 | 46 | 60 | 79 |
| 1440p QHD | 74 | 78 | 102 | 129 |
| 1080p Full HD | 108 | 114 | 132 | 146 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Thief on Your System
The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 5060 is a well-matched combination for a 2014 stealth title like Thief. The data indicates that this combo sits at rank 1856 out of 3720 tested configurations, placing it in the upper half of the database’s performance hierarchy. This is not a top-tier enthusiast setup, but it is far from a low-end pairing. The percentile rankings reinforce this: the CPU lands in the 71st percentile against all tested processors, while the GPU sits in the 72nd percentile against all tested graphics cards. For a game of Thief’s era, this hardware is more than sufficient to push high frame rates at mainstream resolutions, though 4K Ultra remains out of reach.
How This Combo Ranks
The combo’s global rank of 1856 out of 3720 places it just above the midpoint of all recorded system pairings. In practical terms, this means the i5-11400F and RTX 5060 will handle the vast majority of modern and older titles at playable settings, and Thief is no exception. The CPU’s average benchmark score of 17177 and the GPU’s average benchmark score of 26331 both contribute to this mid-to-upper standing. Against other combos in the database, this pairing demonstrates a solid balance: the processor is not a bottleneck at 1080p or 1440p, and the graphics card provides enough headroom for high preset levels.
When looking at the component-level data, the i5-11400F’s multi-threaded performance is respectable for its class, with a Cinebench R23 multi-core score of 14340 and a Geekbench multi-core score of 7737. Single-thread performance is equally competent, with a Geekbench single-core score of 1777. The RTX 5060, meanwhile, delivers a Passmark G3D score of 20891 and a 3DMark Steel Nomad DX12 score of 3628, indicating strong DirectX 12 capability. These numbers align with the combo’s overall rank, showing a system that is neither overkill nor underpowered for Thief, but comfortably positioned to deliver smooth gameplay with high visual quality at most resolutions.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of exactly 60 FPS with a minimum of 51 and a maximum of 69. Low settings push the average up to 79 FPS, but Medium is the highest quality option that meets the playability threshold. High and Ultra fall short, with averages of 46 and 44 FPS respectively, so 4K users should stick with Medium to avoid frame drops below the 60 FPS target.
At 2560x1440, the situation improves dramatically. The highest preset that maintains 60 FPS or better is Ultra, which averages 74 FPS. High settings average 78 FPS, Medium averages 102 FPS, and Low averages 129 FPS. Since even the most demanding preset clears the threshold with room to spare, 1440p owners can run Thief at maximum visual fidelity without concerns about playability.
At 1920x1080, the combo is even more comfortable. Ultra settings average 108 FPS, High averages 114 FPS, Medium averages 132 FPS, and Low averages 146 FPS. All presets are far above the 60 FPS threshold, so 1080p users can select Ultra and enjoy a smooth experience. The data shows that 1080p Ultra is the best choice for this resolution, as it offers the highest visual quality while still delivering nearly double the playable frame rate.
CPU and GPU Roles
The recorded FPS scaling across resolutions and presets reveals how the workload shifts between the CPU and GPU in Thief. At 1080p, the GPU is clearly the dominant factor, as evidenced by the steep drop from Low (146 FPS) to Ultra (108 FPS), a reduction of 38 FPS. This indicates that the graphics card is doing most of the heavy lifting, and the i5-11400F has ample headroom to feed it frames. The CPU’s single-thread performance, with a Passmark single-thread score of 2981, is more than adequate for this scenario.
Moving to 1440p, the GPU load increases, but the CPU still keeps pace. The gap between Low (129 FPS) and Ultra (74 FPS) widens to 55 FPS, showing that the RTX 5060 is starting to work harder. The i5-11400F’s six cores and twelve threads, backed by a 12 MB L3 cache, prevent any noticeable CPU-bound limitation here. The frame rates remain high across all presets, confirming that neither component is a clear bottleneck at this resolution.
At 4K, the GPU becomes the sole limiting factor. The difference between Low (79 FPS) and Ultra (44 FPS) is 35 FPS, but the absolute values are much lower than at lower resolutions. The i5-11400F’s role diminishes further, as the RTX 5060’s 8 GB of GDDR7 memory and 128-bit bus are strained by the pixel count. The 44 FPS at Ultra and 46 FPS at High demonstrate that the graphics card cannot sustain 60 FPS at the highest settings, regardless of CPU capability. In short, at 1080p and 1440p the GPU is the primary driver of performance, while at 4K it is the outright constraint, with the CPU contributing little to the final frame rate.
Similar Performance Alternatives
For the CPU, the i5-11400F’s nearest rivals in the database are remarkably close in average benchmark score. The AMD EPYC 7H12 scores 17120, a mere 0.3% below the i5-11400F’s 17177. The Intel Core i5-12450H scores 17239, which is 0.4% higher. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% higher, and the Intel Core Ultra 7 164U scores 17074, 0.6% lower. These deltas are so small that, in real-world gaming, a user would be hard-pressed to notice any difference between them in Thief. Any of these processors would deliver nearly identical frame rates when paired with the RTX 5060.
For the GPU, the nearest rivals show a similar pattern. The AMD Radeon 860M scores 26401, just 0.3% above the RTX 5060’s 26331. The NVIDIA GeForce MX550 scores 26421, also 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, 0.8% higher, while the AMD Radeon RX 6750 XT scores 26011, 1.2% lower. These differences are negligible in practice, meaning that swapping the RTX 5060 for any of these cards would yield near-identical performance in Thief. The RX 6750 XT would be the closest match in terms of overall capability, while the RX 5700 XT 50th Anniversary edges slightly ahead on paper.
Measured FPS Breakdown
The measured FPS data provides a complete picture of how this combo performs across all settings and resolutions. At 1920x1080, Low settings average 146 FPS, Medium averages 132 FPS with a minimum of 112 and a maximum of 152, High averages 114 FPS, and Ultra averages 108 FPS. The minimum FPS at Medium, 112, is still well above the playable threshold, indicating stable performance even during demanding scenes.
At 2560x1440, Low settings average 129 FPS, Medium averages 102 FPS with a minimum of 87 and a maximum of 118, High averages 78 FPS, and Ultra averages 74 FPS. The Medium preset’s minimum of 87 FPS shows that even the lower bound remains smooth, and the Ultra average of 74 FPS provides a comfortable margin above 60 FPS.
At 3840x2160, Low settings average 79 FPS, Medium averages 60 FPS with a minimum of 51 and a maximum of 69, High averages 46 FPS, and Ultra averages 44 FPS. The Medium preset is the only one that hits the 60 FPS average target, but its minimum of 51 FPS suggests occasional dips below the threshold. Users sensitive to frame pacing may prefer Low at 4K, which averages 79 FPS, to ensure a consistently smooth experience.
FAQ
Q: Can this combo run Thief at 4K Ultra settings?
A: No. At 3840x2160 Ultra, the average FPS is 44, which falls below the 60 FPS playable threshold. The highest playable preset at 4K is Medium, which averages 60 FPS.
Q: What is the best settings preset at 1440p?
A: Ultra settings at 2560x1440 average 74 FPS, making it the highest preset that stays above 60 FPS. All lower presets also exceed the threshold, with High at 78 FPS, Medium at 102 FPS, and Low at 129 FPS.
Q: How does the CPU compare to its nearest rivals?
A: The i5-11400F’s average benchmark score of 17177 is within 0.6% of its closest competitors: the AMD EPYC 7H12 (17120), Intel Core i5-12450H (17239), AMD Ryzen 3 PRO 8300G (17278), and Intel Core Ultra 7 164U (17074). Performance differences would be imperceptible in Thief.
Q: Is the RTX 5060 a bottleneck at 1080p?
A: No. At 1920x1080, even Ultra settings average 108 FPS, while Low averages 146 FPS. The GPU handles all presets with ease, and the CPU keeps up without issue.
Q: What frame rates can be expected at 4K Medium settings?
A: The 3840x2160 Medium preset averages 60 FPS, with a minimum of 51 FPS and a maximum of 69 FPS. This is the highest playable setting at that resolution.
Q: Which component is more important for performance in Thief?
A: The GPU is the primary factor at all resolutions. At 1080p and 1440p, the RTX 5060 determines the frame rate scaling between presets, and at 4K it becomes the sole constraint, as the CPU’s performance is sufficient to avoid limiting the system.