Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Thief
Stealth 2014

Thief

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
181 FPS
Ultra 1080p Measured
136 FPS

1440p (2K / QHD)

Low 1440p Measured
160 FPS
Ultra 1440p Measured
94 FPS

4K (Ultra HD)

Low 4K Measured
100 FPS
Ultra 4K Measured
54 FPS
7ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,499
Your CPU 25,005
Graphics Card
Required 27,801
Your GPU 23,172

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 60 74 100
1440p QHD 94 96 129 160
1080p Full HD 136 143 163 181

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 143
1920x1080 Low 181
1920x1080 Medium 163
1920x1080 Ultra 136
2560x1440 High 96
2560x1440 Low 160
2560x1440 Medium 129
2560x1440 Ultra 94
3840x2160 High 60
3840x2160 Low 100
3840x2160 Medium 74
3840x2160 Ultra 54

Performance Analysis: Thief on Your System

The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3080 combination delivers a strong performance profile in Thief, a 2014 stealth title that remains highly playable across most modern configurations. The measured data shows this pairing excels at 1080p and 1440p, with 4K requiring some settings adjustments to maintain smooth frame rates. This analysis breaks down the exact performance metrics, contextualizes the combo’s standing among 3,720 tested configurations, and examines the balance between CPU and GPU workload across resolutions.

Measured FPS Breakdown

At 1920x1080, the combo delivers exceptionally high frame rates across all four presets. The Low preset averages 180.7 FPS, which is the highest recorded figure for this configuration. Medium follows closely at 162.7 FPS, while High drops to 142.6 FPS. The Ultra preset still maintains a robust 135.6 FPS average. Notably, the gap between Low and Ultra is 45.1 FPS, indicating that even the most demanding settings at this resolution leave substantial headroom above the 60 FPS playability threshold.

Moving to 2560x1440, the frame rates remain high but show a predictable decline from 1080p. The Low preset averages 160.1 FPS, a 20.6 FPS reduction from the same settings at 1080p. Medium delivers 129.3 FPS, while High achieves 96.4 FPS. Interestingly, the Ultra preset at 1440p averages 94.2 FPS, which is only 2.2 FPS lower than High — a smaller delta than the 6.4 FPS gap seen at 1080p between those two presets. This suggests the GPU begins to become more of a limiting factor at higher resolutions, compressing the performance difference between settings.

At 3840x2160, the performance scaling becomes more pronounced. The Low preset averages 100.4 FPS, which remains comfortably above 60 FPS. Medium drops to 73.7 FPS, still playable but with less headroom. High averages 59.8 FPS, falling just short of the 60 FPS threshold. The Ultra preset averages 53.6 FPS, the lowest figure recorded for this combo. The resolution scaling from 1440p to 4K shows a 37.4% reduction in average FPS on the Medium preset (129.3 to 73.7), highlighting the significant GPU workload increase at 4K.

How This Combo Ranks

The combination of the Ryzen 5 8400F and RTX 3080 holds the 889th position out of 3,720 tested combos in Thief, placing it in the top 24% of all configurations. This rank reflects the strong balance between the CPU’s single-thread performance and the GPU’s raw rasterization power.

The CPU itself ranks in the 77th percentile against all processors, with an average benchmark score of 25,005. Its nearest rival, the AMD Ryzen 5 7500F, scores 24,964 — a mere 0.2% difference. The Intel Core i7-11850H is 0.3% behind at 24,935, while the Intel Core i7-13620H sits 0.4% lower at 24,911. On the higher end, the AMD EPYC 9474F scores 25,103, just 0.4% above the 8400F. These tight margins indicate that the CPU’s performance is highly competitive within its segment.

The GPU holds the 68th percentile against all graphics cards, with an average benchmark score of 23,172. Its nearest rivals are surprisingly close: the NVIDIA P106-100 scores 23,249 (-0.3%), the AMD Radeon Pro Vega 16 scores 23,250 (-0.3%), the AMD Radeon RX 6600M scores 23,273 (-0.4%), and the AMD Radeon R9 M290X scores 23,276 (-0.4%). These delta percentages are all within a fraction of a percent, suggesting that the RTX 3080’s benchmark position is tightly clustered with these competitors despite their differing architectures and market positions.

Given the combo’s rank of 889 out of 3,720, the data shows it outperforms roughly 76% of tested configurations in Thief. This places it in the upper quartile, though not among the elite top-tier systems that would likely pair higher-end CPUs with flagship GPUs.

CPU and GPU Roles

The benchmark data reveals a clear shift in component responsibility as resolution increases. At 1920x1080, the CPU plays a more significant role, as evidenced by the relatively small FPS drops between presets. The difference between Low (180.7 FPS) and Ultra (135.6 FPS) is 45.1 FPS, but even at Ultra, the frame rate suggests the CPU is keeping pace with the GPU’s output. The Ryzen 5 8400F’s single-thread score of 951 in 3DMark and 3,685 in Passmark indicates strong per-core performance that prevents bottlenecking at lower resolutions.

At 2560x1440, the GPU begins to assert more influence. The FPS drop from Low to Ultra is 65.9 FPS (160.1 to 94.2), which is a larger absolute gap than at 1080p. This widening spread indicates that the GPU’s rendering workload is becoming more dominant. The CPU’s multi-threaded capabilities, reflected in its Cinebench R23 multi-core score of 20,851, remain sufficient to feed the GPU, but the frame rates are increasingly dictated by the RTX 3080’s pixel throughput.

At 3840x2160, the GPU is clearly the limiting factor. The FPS range across presets spans from 53.6 (Ultra) to 100.4 (Low), a 46.8 FPS spread. The fact that even the Low preset cannot reach the 180+ FPS seen at 1080p indicates that the GPU is saturated at 4K. The RTX 3080’s 10 GB of GDDR6X memory and 760.3 GB/s bandwidth are being taxed heavily at this resolution. The CPU’s role diminishes significantly; the data shows that reducing settings from Ultra to Low at 4K yields a 46.8 FPS improvement, which is almost entirely attributable to reduced GPU workload rather than CPU performance changes.

The scaling between resolutions on the same preset further illustrates this dynamic. At Medium settings, the FPS drops from 162.7 at 1080p to 129.3 at 1440p (a 20.5% reduction), then to 73.7 at 4K (a 43% reduction from 1440p). This progressive decline with each resolution step confirms that the GPU is the primary bottleneck as pixel count increases, while the CPU maintains sufficient headroom throughout.

The Verdict

The data clearly indicates that this PC can run Thief at all tested resolutions, but the playable settings vary significantly by resolution. At 1920x1080, every preset — Low, Medium, High, and Ultra — clears the 60 FPS threshold with substantial margin. The best settings are Ultra, delivering an average of 135.6 FPS, which is more than double the playability threshold.

At 2560x1440, all four presets also remain above 60 FPS. The best settings are Ultra, averaging 94.2 FPS. This provides excellent visual quality while maintaining smooth gameplay, with nearly 34 FPS of headroom above the threshold.

At 3840x2160, only Low (100.4 FPS) and Medium (73.7 FPS) are playable according to the verdict data. High falls just short at 59.8 FPS, and Ultra is further behind at 53.6 FPS. The best playable settings are Medium, which achieves 73.7 FPS. For 4K gaming, users should select Medium to stay comfortably above 60 FPS; choosing High would result in sub-60 FPS performance, though the 59.8 FPS average is close enough that minor variations could occasionally push it above the threshold.

The overall verdict is positive: this system is fully capable of running Thief at high refresh rates at 1080p and 1440p, and remains playable at 4K with reduced settings. The RTX 3080’s 10 GB memory capacity is sufficient for this 2014 title, which does not demand the larger frame buffers required by modern games.

Similar Performance Alternatives

Based on the nearest rivals data, several hardware alternatives would produce very similar performance in Thief. For the CPU, the AMD Ryzen 5 7500F is the closest match, with an average benchmark score just 0.2% lower than the Ryzen 5 8400F. This means users with the 7500F would see nearly identical frame rates. The Intel Core i7-11850H and Core i7-13620H are also close, at 0.3% and 0.4% lower scores respectively. These processors would deliver virtually indistinguishable performance in this game, as the CPU is not the limiting factor at most resolutions.

For the GPU, the nearest rivals are more diverse. The NVIDIA P106-100, AMD Radeon Pro Vega 16, AMD Radeon RX 6600M, and AMD Radeon R9 M290X all have average benchmark scores within 0.4% of the RTX 3080. This is surprising given the architectural differences, but the data shows these GPUs would produce similar average frame rates in Thief. However, it is important to note that the RTX 3080’s higher memory bandwidth (760.3 GB/s) and larger 10 GB VRAM pool may provide advantages in other titles or at higher resolutions, even if the average benchmark scores are closely matched.

For a system builder seeking comparable performance, swapping the Ryzen 5 8400F for a Ryzen 5 7500F would yield essentially identical results. Similarly, pairing the RTX 3080 with any of its nearest rival GPUs would produce frame rates within a fraction of a percent in this game, though the RTX 3080 remains the more capable card for future titles.

FAQ

Q: What is the highest average FPS this combo achieves in Thief?

A: The highest recorded average is 180.7 FPS at 1920x1080 with the Low preset. The best visual quality setting that exceeds 60 FPS at 1080p is Ultra, averaging 135.6 FPS.

Q: Can this system run Thief at 4K with Ultra settings?

A: No. At 3840x2160 with Ultra settings, the average FPS is 53.6, which falls below the 60 FPS playability threshold. The highest playable setting at 4K is Medium, averaging 73.7 FPS.

Q: How does the Ryzen 5 8400F compare to its closest CPU rival?

A: The AMD Ryzen 5 7500F has an average benchmark score of 24,964, which is 0.2% lower than the 8400F’s 25,005. This difference is negligible in real-world gaming performance.

Q: Is the RTX 3080 or the Ryzen 5 8400F more important for performance at 1440p?

A: At 2560x1440, the GPU becomes more significant, as shown by the 65.9 FPS spread between Low (160.1 FPS) and Ultra (94.2 FPS). The CPU still provides adequate support, but the GPU’s rendering workload largely determines the frame rate.

Q: What percentile does this combo rank among all tested configurations in Thief?

A: The combo ranks 889th out of 3,720 tested combos, placing it in the top 24% of all configurations. This is a strong result, though not elite-tier.

Q: Are there any settings at 4K that achieve over 100 FPS?

A: Yes, the Low preset at 3840x2160 averages 100.4 FPS. This is the only 4K setting that exceeds 100 FPS; Medium averages 73.7 FPS, High averages 59.8 FPS, and Ultra averages 53.6 FPS.