Instant compatibility check with FPS benchmarks and optimization tips
Thief
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 75 | 79 | 103 | 136 |
| 1440p QHD | 127 | 134 | 153 | 169 |
| 1080p Full HD | 155 | 157 | 173 | 192 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Thief on Your System
The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5080 combination delivers exceptionally high frame rates in Thief, with the data showing every tested settings preset at every resolution clearing the 60 FPS playability threshold by a wide margin. Across the board, this pairing demonstrates that the game, originally released in 2014, is far from a challenge for this modern hardware, with performance scaling predictably from 4K down to 1080p.
Similar Performance Alternatives
The CPU and GPU in this combo each have close performance neighbors according to aggregate benchmark scores. The AMD Ryzen 5 7600 posts an average benchmark score of 26324, placing it in the 78th percentile of all CPUs. The nearest rival is the AMD Ryzen 9 6900HX, which scores 26274, a negligible 0.2% difference. Similarly, the AMD Ryzen 7 7435HS scores 26402, which is 0.3% higher than the 7600, making it effectively indistinguishable in raw compute performance. The Intel Core i9-11900KF trails by a mere 0.4% with a score of 26212, while the AMD Ryzen 5 8540U is 0.5% lower at 26187. For Thief, any of these CPUs would produce nearly identical frame rates, as the game's workload is unlikely to differentiate between these closely matched processors.
On the GPU side, the NVIDIA GeForce RTX 5080 achieves an average benchmark score of 56083, sitting in the 87th percentile of all GPUs. Its closest rival is the AMD Radeon 8060S with a score of 55757, just 0.6% behind. The AMD Radeon RX 6750 GRE 12 GB is also within a 0.7% margin at 55698. The AMD Radeon Pro W5700X scores 54828, a 2.3% deficit, while the AMD Radeon RX 9070 GRE actually outperforms the RTX 5080 by 2.2% with a score of 57367. When running Thief, users with any of these GPUs would observe almost identical performance, with the RX 9070 GRE potentially offering a slight edge in frame rates, though the difference would be within the margin of measurement error.
FAQ
Q: What is the highest average frame rate this combo achieves in Thief?
A: The maximum recorded average FPS is 192, achieved at 1920x1080 resolution with Low settings. This drops to 136 at 3840x2160 with Low settings, showing a clear resolution scaling trend.
Q: Does this system maintain 60 FPS at 4K with maximum settings?
A: Yes, at 3840x2160 with Ultra settings, the average FPS is 75, which is 25% above the 60 FPS playability threshold. The data confirms that all four settings presets at 4K—Low, Medium, High, and Ultra—remain above 60 FPS.
Q: How does the RTX 5080 compare to its nearest GPU rival in aggregate performance?
A: The RTX 5080's average benchmark score is 56083. Its closest competitor, the AMD Radeon 8060S, scores 55757, a 0.6% difference. The AMD Radeon RX 9070 GRE is the only near rival that outperforms it, with a score of 57367, which is 2.2% higher.
Q: What is the frame time consistency at 2560x1440 with Medium settings?
A: At 2560x1440 with Medium settings, the average FPS is 153, with a minimum of 130 FPS and a maximum of 176 FPS. This indicates a stable frame delivery with no dips near the 60 FPS threshold.
Q: Is the Ryzen 5 7600 a bottleneck for the RTX 5080 in Thief?
A: Benchmark data shows the CPU scores 12735 in Cinebench R23 multi-core and 1852 in single-core, placing it in the 78th percentile of all CPUs. Given that even at 1080p the average FPS reaches 157 on High settings, the CPU does not appear to constrain the GPU in this game.
Q: How many tested hardware combinations does this setup rank above in Thief?
A: This combo ranks 276th out of 3720 tested combinations, meaning it outperforms approximately 92.6% of all other CPU-GPU pairings tested in this game.
Measured FPS Breakdown
At 1920x1080, the data shows the highest performance tier. With Low settings, the average FPS is 192. Moving to Medium settings, the average drops to 173, with a minimum of 147 FPS and a maximum of 199 FPS. High settings yield an average of 157 FPS, while Ultra settings produce 155 FPS on average. The difference between High and Ultra is just 2 FPS, suggesting that at 1080p the GPU has ample headroom even at maximum quality.
At 2560x1440, performance remains exceptionally high. Low settings deliver 169 FPS on average. Medium settings average 153 FPS, with a minimum of 130 FPS and a maximum of 176 FPS. High settings produce 134 FPS, while Ultra settings average 127 FPS. The scaling from 1080p to 1440p shows a reduction of roughly 20-25% across settings, which is consistent with the increased pixel count of 78% more pixels.
At 3840x2160, the frame rates remain well above playable levels. Low settings average 136 FPS. Medium settings deliver 103 FPS on average, with a minimum of 88 FPS and a maximum of 119 FPS. High settings produce 79 FPS, while Ultra settings average 75 FPS. The 4K results show a more pronounced drop from 1440p, with approximately 40-45% lower frame rates, reflecting the 2.25x pixel increase over 1440p.
The Verdict
This PC configuration can run Thief with absolute ease at all tested resolutions and settings. According to the verdict data, at 3840x2160, all four settings presets—Low, Medium, High, and Ultra—are playable, meaning they stay at or above 60 FPS. The best settings at 4K are Ultra, which maintains an average of 75 FPS. At 2560x1440, the same pattern holds: all settings are playable, with Ultra achieving 127 FPS on average. At 1920x1080, Ultra settings reach 155 FPS on average, and all presets remain far above the 60 FPS threshold.
The minimum FPS data available further reinforces the verdict. At 4K Medium, the minimum recorded FPS is 88, which is still 28 FPS above the playability threshold. At 1440p Medium, the minimum is 130 FPS. At 1080p Medium, the minimum is 147 FPS. Every measured frame rate, even in the worst-case scenarios, clears 60 FPS with substantial margin. The data indicates that no settings combination at any resolution will drop below 60 FPS.
How This Combo Ranks
In the database of tested hardware combinations for Thief, this pairing of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5080 ranks 276th out of 3720 total combinations. This places it in the top 7.4% of all tested systems, which is a strong showing given that the RTX 5080 is a high-end GPU and the Ryzen 5 7600 is a mid-range CPU. The rank reflects that while the GPU is among the faster options available, the CPU's position in the 78th percentile of all processors slightly holds back the overall combo ranking. Systems paired with faster CPUs and equally powerful GPUs would rank higher, but the practical impact on Thief is minimal given the game's age and the high frame rates already achieved.
The percentile data for the individual components shows the GPU is the stronger performer relative to its peers. The RTX 5080 sits in the 87th percentile of all GPUs, while the Ryzen 5 7600 sits in the 78th percentile of all CPUs. The gap in percentile ranking suggests that the CPU is more of a limiting factor than the GPU for overall system performance, though in Thief specifically, the CPU's single-thread performance of 1852 in Cinebench R23 is more than sufficient for the game's workload.
Best Settings per Resolution
At 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 155 FPS. This is the maximum quality setting available, and the system has enormous headroom above the 60 FPS threshold. At 2560x1440, Ultra settings also remain the best choice, delivering an average of 127 FPS. The 28 FPS difference between 1080p and 1440p at Ultra settings shows the impact of increased resolution, but the frame rate remains more than double the playability threshold.
At 3840x2160, Ultra settings still clear the 60 FPS bar with an average of 75 FPS. This is the most demanding configuration tested, and the data shows it stays 25% above the playability threshold. The minimum FPS at 4K is only recorded for Medium settings at 88 FPS, but given the average of 75 FPS at Ultra, users can expect occasional dips below that average, though the data does not indicate any drop below 60 FPS. For the absolute smoothest experience at 4K, Medium settings at 103 FPS would provide additional headroom, but Ultra quality is entirely viable.
CPU and GPU Roles
The data reveals how the balance between CPU and GPU workload shifts across resolutions. At 1920x1080, the CPU plays a relatively larger role, as the GPU has excess capacity to render frames quickly. The difference between Low settings (192 FPS) and Ultra settings (155 FPS) at 1080p is 37 FPS, or about 19%, indicating that the GPU is still the primary driver of performance differences between presets. However, the high frame rates suggest that the CPU's single-thread performance is sufficient to feed the GPU without creating a bottleneck.
At 2560x1440, the GPU begins to assert more influence on performance. The spread between Low (169 FPS) and Ultra (127 FPS) is 42 FPS, or 25%, which is a larger relative difference than at 1080p. This indicates that as resolution increases, the GPU's rendering workload grows, making the graphics card the more significant determinant of frame rates. The CPU's role diminishes because the GPU spends more time per frame on pixel processing.
At 3840x2160, the GPU is almost entirely responsible for performance. The difference between Low (136 FPS) and Ultra (75 FPS) is 61 FPS, or 45%, showing that the GPU's rendering capabilities are the dominant factor. The CPU's contribution is minimal at this resolution, as the frame rates are limited by the GPU's ability to process the massive pixel count. The scaling from 1080p to 4K at Ultra settings—from 155 FPS down to 75 FPS—represents a 52% reduction, which closely tracks the 4x increase in pixel count, confirming that the GPU is the constraint at higher resolutions. Conversely, the relatively small difference between 1080p and 1440p at Ultra (155 FPS vs 127 FPS) suggests that the CPU still provides enough throughput to keep the GPU well-utilized at 1440p, but at 4K the GPU's raw pixel throughput becomes the limiting factor.