Instant compatibility check with FPS benchmarks and optimization tips
Thief
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 41 | 43 | 56 | 74 |
| 1440p QHD | 70 | 73 | 96 | 126 |
| 1080p Full HD | 101 | 107 | 140 | 184 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Thief on Your System
The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4060 combo ranks in the 50th percentile for Thief, sitting at position 1862 out of 3720 tested combinations. This places it squarely in the middle of the pack—not a standout performer, but a balanced pairing that clears the 60 FPS playable threshold at every resolution except 4K Ultra. The data shows a system that handles a 2014 stealth title with authority at mainstream resolutions, though 4K demands settings discipline to stay smooth.
How This Combo Ranks
The combo’s rank of 1862 out of 3720 means roughly half of all tested pairings outperform it, and half fall behind. That is a neutral result for a mid-range CPU and GPU pairing. The CPU itself sits at the 78th percentile among all processors, with an average benchmark score of 26324, while the GPU lands at the 61st percentile among all graphics cards, averaging 17639. The gap between those percentiles is telling: the Ryzen 5 7600 is the stronger half of this duo, offering headroom that the RTX 4060 cannot always exploit. In Thief specifically, the measured FPS data confirm this—1080p results are excellent, but the 4K numbers show the GPU becoming the limiting factor. Compared to the full field of 3720 combos, this pairing is unremarkable in raw ranking but entirely serviceable for the game’s demands, which favor CPU throughput in stealth AI and physics calculations alongside moderate GPU load.
Measured FPS Breakdown
At 1920x1080, the RTX 4060 and Ryzen 5 7600 deliver strong numbers across all presets. Low settings produce an average of 184 FPS, Medium hits 140 FPS with a minimum of 119 and maximum of 161, High averages 107 FPS, and Ultra averages 101 FPS. Every preset stays far above the 60 FPS playable threshold, and even the worst-case minimum at Medium—119 FPS—is nearly double the threshold. This resolution is where the combo is most comfortable, with headroom to spare for background tasks or streaming.
Moving to 2560x1440, the picture remains healthy but the margins tighten. Low settings average 126 FPS, Medium averages 96 FPS with a minimum of 82 and maximum of 110, High averages 73 FPS, and Ultra averages 70 FPS. All four presets stay above 60 FPS, but Ultra’s 70 FPS average leaves only a 10 FPS cushion. The minimum at Medium, 82 FPS, still clears the threshold comfortably, suggesting that even demanding scenes at 1440p will not cause stutter.
At 3840x2160, the GPU begins to struggle. Low settings average 74 FPS, which is playable, but Medium drops to 56 FPS with a minimum of 48 and maximum of 65. High averages 43 FPS, and Ultra averages 41 FPS. The data shows a clear cliff between Low and Medium at 4K: Low clears 60 FPS by 14 frames, while Medium falls 4 frames short. The minimum at Medium, 48 FPS, confirms that dips below 60 are not occasional but sustained in demanding scenes. For 4K play, only the Low preset is viable, and even that is not a huge margin.
CPU and GPU Roles
The scaling between resolutions and presets reveals which component dominates in Thief. At 1080p, the CPU is the primary driver. The jump from Low to Ultra costs 83 FPS (184 to 101), but the GPU is never stressed—even at Ultra, the frame rate remains above 100. This indicates that the Ryzen 5 7600’s single-thread performance, evidenced by its 3DMark single-thread score of 999 and Cinebench R23 single-core score of 1852, is sufficient to feed the GPU fully at this resolution. The game’s stealth mechanics, which require frequent AI state checks and pathfinding calculations, benefit from the CPU’s 6 cores and 12 threads, though the 3DMark 16-thread score of 6499 suggests that more threads would not dramatically change results.
At 1440p, the balance shifts toward the GPU. The frame rate drop from 1080p Ultra (101 FPS) to 1440p Ultra (70 FPS) is 31 FPS, a 31% reduction that tracks closely with the pixel count increase of 78% (from 2.07 million to 3.69 million pixels). This indicates that the RTX 4060’s 8 GB of GDDR6 memory and 272.0 GB/s bandwidth are becoming the bottleneck, though the CPU still contributes enough to keep all presets above 60 FPS. The GPU’s passmark G3D score of 19545 places it in the 61st percentile, and at 1440p that mid-range positioning shows: playable, but without the headroom seen at 1080p.
At 4K, the GPU is unequivocally the limiting factor. The difference between 1080p Low (184 FPS) and 4K Low (74 FPS) is a 60% reduction, far exceeding the pixel count increase from 2.07 million to 8.29 million (300% more pixels). The RTX 4060’s memory bandwidth, 272.0 GB/s, and its 128-bit bus width are insufficient for the data throughput required at 4K. The CPU’s role diminishes sharply—even at Low settings, the GPU cannot push beyond 74 FPS, suggesting that the processor is waiting on the graphics card rather than the reverse. The verdict is clear: for 4K, the CPU is irrelevant to performance; the GPU decides everything.
FAQ
Q: Can this combo run Thief at 4K Ultra?
A: No. The measured average FPS at 4K Ultra is 41, which is 19 FPS below the 60 FPS playable threshold. The High preset at 4K averages 43 FPS, also unplayable. Only Low settings at 4K reach 74 FPS average, which is playable.
Q: What is the best settings preset at 1440p for this combo?
A: Ultra settings at 2560x1440 average 70 FPS, which is above the 60 FPS threshold. This is the most demanding preset that remains playable at this resolution. Medium averages 96 FPS with a minimum of 82, offering more headroom if you prefer consistent frame times.
Q: How does the RTX 4060 compare to its nearest rival, the AMD Radeon 780M?
A: The RTX 4060 averages a benchmark score of 17639, while the AMD Radeon 780M averages 17588, a delta of 0.3% in favor of the NVIDIA card. This difference is negligible in practice, meaning the 780M would deliver nearly identical frame rates in Thief.
Q: Is the Ryzen 5 7600 a bottleneck at 1080p?
A: No. At 1080p Ultra, the combo averages 101 FPS, and at Low it reaches 184 FPS. The CPU’s single-thread score of 999 in 3DMark and 1852 in Cinebench R23 indicate ample processing power. The GPU is the limiting factor even at 1080p Ultra, though not by much.
Q: What frame rates can I expect at 4K Medium settings?
A: The measured average is 56 FPS, with a minimum of 48 and maximum of 65. This falls below the 60 FPS playable threshold, so Medium at 4K is not recommended for smooth play. Dropping to Low raises the average to 74 FPS.
Q: How does this combo rank against all tested combinations for Thief?
A: It ranks 1862 out of 3720, placing it in the 50th percentile. This is a middle-of-the-road result, consistent with the GPU’s 61st percentile and CPU’s 78th percentile standings. Better performance would require a stronger GPU, as the CPU is not the limiting factor.
Similar Performance Alternatives
For the CPU, the Ryzen 5 7600’s nearest rivals in benchmark scores are the AMD Ryzen 9 6900HX (avg score 26274, delta 0.2%), AMD Ryzen 7 7435HS (avg score 26402, delta -0.3%), Intel Core i9-11900KF (avg score 26212, delta 0.4%), and AMD Ryzen 5 8540U (avg score 26187, delta 0.5%). These processors would deliver nearly identical CPU-bound performance in Thief, with deltas under 1% meaning no perceptible frame rate difference. The Ryzen 9 6900HX and Intel Core i9-11900KF are particularly close, with the i9-11900KF trailing by only 0.4%. If you have one of these CPUs, the game’s AI and physics calculations would behave the same as with the Ryzen 5 7600.
For the GPU, the RTX 4060’s nearest rivals are the AMD Radeon HD 7790 (avg score 17666, delta -0.2%), AMD Radeon 780M (avg score 17588, delta 0.3%), AMD Radeon Pro 560 (avg score 17551, delta 0.5%), and AMD Radeon Pro 460 (avg score 17509, delta 0.7%). The HD 7790 is essentially a match, within 0.2%, meaning it would produce the same FPS in Thief at all resolutions. The Radeon 780M, an integrated graphics solution, is also within 0.3%, which is surprising but reflects the benchmark data. These alternatives would all behave similarly in Thief, with the same 4K limitations and 1080p strengths. For a drop-in GPU swap, any of these would yield nearly identical results.
Best Settings per Resolution
At 1920x1080, the best setting is Ultra, which averages 101 FPS. This is the most demanding preset and it clears the 60 FPS threshold by 41 frames, leaving substantial headroom. High averages 107 FPS, but Ultra offers the full visual experience without sacrificing playability.
At 2560x1440, Ultra is also the best setting, averaging 70 FPS. This is 10 FPS above the playable threshold, so you get maximum quality with a modest safety margin. If you prefer more headroom, Medium averages 96 FPS with a minimum of 82, which is a safer choice for competitive play or if you notice occasional dips.
At 3840x2160, the best setting is Low, which averages 74 FPS. This is the only preset that reaches the 60 FPS threshold, and it does so with 14 FPS to spare. Medium averages 56 FPS and is below threshold, so Low is the only playable option at 4K. The frame rate difference between Low and Medium at 4K is 18 FPS, a significant jump that reflects the GPU’s memory bandwidth constraints. For 4K gaming with this combo, accept Low settings or lower the resolution.